导航
Archive
Progress and prospect of research on hole cold expansion technique
WANG Yanli, ZHU Youli, CAO Qiang, ZHANG Xiaohui
doi: 10.7527/S1000-6893.2017.021336
2018, (2): 21336-021336.
PDF [ 10916 K ]( 1344 ) HTML
Dynamic characteristics of hammershock in S-shaped inlet
LIU Tingshen, FENG Lihao, WANG Jinjun
doi: 10.7527/S1000-6893.2017.121339
2018, (2): 121339-121339.
PDF [ 8262 K ]( 509 ) HTML
Experimental study of effects of fluidic obstacle parameters on deflagration-to-detonation transition
PENG Han, HUANG Yue, LIU Chen, XING Fei, LUAN Zhenye
doi: 10.7527/S1000-6893.2017.121412
2018, (2): 121412-121412.
PDF [ 8805 K ]( 531 ) HTML
Characteristics of unstable propagation of rotating detonation wave in plane-radial structure
XIA Zhenjuan, MA Hu, ZHUO Changfei, ZHOU Changsheng
doi: 10.7527/S1000-6893.2017.121438
2018, (2): 121438-121438.
PDF [ 9477 K ]( 271 ) HTML
Characteristic of airplane wheel water spray and its effect on water ingestion of engine inlet
YANG Chengfeng, GUO Zhaodian, DENG Wenjian
doi: 10.7527/S1000-6893.2017.121453
2018, (2): 121453-121453.
PDF [ 6246 K ]( 416 ) HTML
Effect of circumferential non-uniform tip clearance on performance of axial compressor
XIANG Honghui, GE Ning, GAO Jie, TANG Kai, YANG Rongfei
doi: 10.7527/S1000-6893.2017.121491
2018, (2): 121491-121491.
PDF [ 11565 K ]( 339 ) HTML
Application of slotted wall interference assessment and correction technique in transonic wind tunnel
LIU Guangyuan, WEI Zhi, PENG Xin, CHEN Dehua, JIA Zhiliang
doi: 10.7527/S1000-6893.2017.21499
2018, (2): 121499-121499.
PDF [ 6273 K ]( 501 ) HTML
Optimal control method for distributed morphing aircraft based on Karhunen-Loève expansion
GONG Chunlin, CHI Fenghua, GU Liangxian, FANG Hai
doi: 10.7527/S1000-6893.2017.21518
2018, (2): 121518-121518.
PDF [ 9137 K ]( 371 ) HTML
Uncertainty analysis of aerodynamic characteristics for cone-derived waverider configuration
SONG Fuqiang, YAN Chao, MA Baofeng, JU Shengjun
doi: 10.7527/S1000-6893.2017.121519
2018, (2): 121519-121519.
PDF [ 5227 K ]( 558 ) HTML
Quantitative analysis of micro porous structure of dynamic icing
LI Weibin, WEI Dong, DU Yanxia, YI Xian, YANG Xiaofeng
doi: 10.7527/S1000-6893.2017.121536
2018, (2): 121536-121536.
PDF [ 6241 K ]( 336 ) HTML
Flight test of flow separation control using plasma UAV
ZHANG Xin, HUANG Yong, YANG Pengyu, ZHANG Peng, HUANG Zhiyuan, WANG Dawei, LI Huaxing
doi: 10.7527/S1000-6893.2017.121587
2018, (2): 121587-121587.
PDF [ 7787 K ]( 442 ) HTML
Automatic transition prediction for wing-body configurations using dual eN method
ZHU Zhen, SONG Wenping, HAN Zhonghua
doi: 10.7527/S1000-6893.2017.21707
2018, (2): 121707-121707.
PDF [ 8227 K ]( 571 ) HTML
Sorting method for design specifications of solar powered UAV based on FQFD
ZHOU Wei, LI Sai, WANG Xueren, XIE Fei
doi: 10.7527/S1000-6893.2017.21299
2018, (2): 221299-221299.
PDF [ 4528 K ]( 452 ) HTML
Parabolic model of equivalent crack approach for predicting fatigue life of pre-corroded aluminum alloys
DENG Jinghui, CHEN Pingjian, FU Yu
doi: 10.7527/S1000-6893.2017.221421
2018, (2): 221421-221421.
PDF [ 7178 K ]( 271 ) HTML
Experimental investigation on against penetration of metallic honeycomb sandwich plates under low-velocity impact
CHEN Shangjun, QIN Qinghua, ZHANG Wei, XIA Yuanming, YU Xuehui, ZHANG Jianxun, WANG Binwen, WANG Tiejun
doi: 10.7527/S1000-6893.2017.21483
2018, (2): 221483-221483.
PDF [ 4981 K ]( 315 ) HTML
Selective maintenance optimization for multi-state systems subject to common cause failures
CAO Wenbin, JIA Xisheng, HU Qiwei
doi: 10.7527/S1000-6893.2017.221556
2018, (2): 221556-221556.
PDF [ 8250 K ]( 367 ) HTML
Global reliability sensitivity analysis using cross entropy method and space partition
ZHAO Xiang, LI Hongshuang
doi: 10.7527/S1000-6893.2017.221570
2018, (2): 221570-221570.
PDF [ 4126 K ]( 346 ) HTML
A decoupled direct position determination algorithm for multiple targets in mixed LOS/NLOS environments
YIN Jiexin, WANG Ding, WU Ying, LIU Ruirui
doi: 10.7527/S1000-6893.2017.321338
2018, (2): 321338-321338.
PDF [ 6602 K ]( 380 ) HTML
Current and tension control for deployment of a deorbiting electro-dynamic tether system
HUANG Jing, LIU Gang, ZHU Dongfang, SUN Lujun
doi: 10.7527/S1000-6893.2017.21464
2018, (2): 321464-321464.
PDF [ 4963 K ]( 362 ) HTML
An optimal radar resource scheduling algorithm based on integrated tracking and imaging of micro-motion targets
MENG Di, ZHANG Qun, LUO Ying, CHEN Yijun
doi: 10.7527/S1000-6893.2017.21492
2018, (2): 321492-321492.
PDF [ 9129 K ]( 480 ) HTML
Guidance law for cooperative tracking of a ground target based on leader-follower formation of UAVs
ZHANG Min, XIA Weizheng, HUANG Kun, CHEN Xin
doi: 10.7527/S1000-6893.2017.21497
2018, (2): 321497-321497.
PDF [ 9005 K ]( 711 ) HTML
High-precision space-variant motion compensation with multi-level processing for airborne SAR based on subswath
YANG Mingdong, YU Xiang, ZHU Daiyin
doi: 10.7527/S1000-6893.2017.21557
2018, (2): 321557-321557.
PDF [ 11136 K ]( 391 ) HTML
Time-triggered communication scheduling method for off-chip integrated interconnection
KONG Yunwen, LI Qiao, XIONG Huagang, CHENG Zijing
doi: 10.7527/S1000-6893.2017.21590
2018, (2): 321590-321590.
PDF [ 4485 K ]( 320 ) HTML
A method for measuring civil aviation passenger value by combining individual attributes and social relations
DING Jianli, LIU Xiaoqing, WANG Jialiang
doi: 10.7527/S1000-6893.2017.21608
2018, (2): 321608-321608.
PDF [ 3921 K ]( 288 ) HTML
Cohesive zone model for prepreg tack based on probe test
SHU Zhan, PENG Xiao, LI Fafei, XU Qiang
doi: 10.7527/S1000-6893.2017.421416
2018, (2): 421416-421416.
PDF [ 13052 K ]( 412 ) HTML
Tension-tension fatigue performance of unidirectional out-of-autoclave composite manufactured by automated fiber placement
DONG Anqi, ZHAO Xinqing, ZHAO Yan
doi: 10.7527/S1000-6893.2017.421422
2018, (2): 421422-421422.
PDF [ 4247 K ]( 447 ) HTML
Academic Quality
Download Ranking