钛合金铣削刀具/工件接触区域温度预测

doi:10.7527/S1000-6893.2018.22128

Abstract

Abstract: Titanium alloy (Ti-6Al-4V) is widely used in the aviation and aerospace industry because of its outstanding overall performance. However, due to its intrinsic characteristics of low thermal conductivity and low elastic modulus, a titanium alloy is difficult to machine, which is featured by the elevated temperature in the machining zone, severe tool wear, and poor surface finish of a machined part. Therefore, it is of a great significance to study the temperature of the tool/workpiece contact area in the milling process. In this study, the three heat sources in the machining zone are assumed spiral-line shaped. A closed-form model, similar to the milling force prediction model, is proposed to calculate the heat flux density and milling heat coefficients. Milling experiments are conducted to calibrate the milling heat coefficients. The results show that the heat flux density is approximately linearly increased with the increase of cutting thickness. A model for predicting the temperature in the machining zone is proposed and validated by experiments using semi-artificial thermocouples. The relative errors of experimental values and predictive values are within 10%. This study offers a guidance to determination of the temperature in the machining zone and optimization of the process parameters in machining processes.

Key words: titanium alloy, milling temperature, heat flux density, milling heat coefficient, semi-artificial thermocouple

CLC Number:

V261.2⁺3

LIU Julong, ZHANG Bi, BAI Qian, CHENG Bo. Temperature prediction of tool/workpiece contact zone in titanium milling[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(12): 422128-422128.

References

[1] EDKINS K D, RENSBURG N J, LAUBSCHER R F. Evaluating the subsurface microstructure of machined Ti-6Al-4V[J]. Procedia CIRP, 2014, 13:270-275.
[2] 陈燕, 杨树宝, 傅玉灿, 等. 钛合金TC4高速切削刀具磨损的有限元仿真[J]. 航空学报, 2013, 34(9):2230-2240. CHEN Y, YANG S B, FU Y C, et al. FEM estimation of tool wear in high speed cutting of Ti6Al4V alloy[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(9):2230-2240(in Chinese).
[3] SUN Y J, SUN J, LI J F, et al. An experimental investigation of the influence of cutting parameters on cutting temperature in milling Ti6Al4V by applying semi-artificial thermocouple[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(5-8):765-773.
[4] PATIL S, JADHAV S, KEKADE S, et al. The influence of cutting heat on the surface integrity during machining of titanium alloy Ti6Al4V[J]. Procedia Manufacturing, 2016, 5:857-869.
[5] 鞠华伟. 热管式立铣刀温度场及动态特性研究[D]. 济南:山东大学, 2012:13-23. JU H W. Research on the temperature field and dynamics characteristics of heat pipe end mill[D]. Jinan:Shandong University, 2012:13-23(in Chinese).
[6] 阎海鹏. 高速铣削铝合金切削温度的研究[D]. 南京:南京理工大学, 2004:19-34. YAN H P. Research on the temperature of high-speed milling of aluminum-alloys[D]. Nanjing:Nanjing University of Science and Technology, 2004:19-34(in Chinese).
[7] JIAO L, WANG X B, QIAN Y B, et al. Modelling and analysis for the temperature field of the machined surface in the face milling of aluminium alloy[J]. International Journal of Advanced Manufacturing Technology, 2015, 81(9-12):1797-1808.
[8] 毕运波, 方强, 董辉跃, 等. 航空铝合金高速铣削温度场的三维有限元模拟及试验研究[J]. 机械工程学报, 2010, 46(7):160-165. BI Y B, FANG Q, DONG H Y, et al. Research on 3D numerical simulation and experiment of cutting temperature for high speed milling of aerospace aluminum alloy[J]. Journal of Mechanical Engineering, 2010, 46(7):160-165(in Chinese).
[9] LIN S, PENG F Y, WEN J, et al. An investigation of workpiece temperature variation in end milling consid-ering flank rubbing effect[J]. International Journal of Machine Tools & Manufacture, 2013, 73(7):71-86.
[10] LIU J, CHEN G, JI C H, et al. An investigation of workpiece temperature variation of helical milling for carbon fiber reinforced plastics (CFRP)[J]. International Journal of Machine Tools and Manufacture, 2014, 86:89-103.
[11] YAN R, ZENG H H, PENG F Y, et al. Analytical mod-eling and experimental validation of workpiece temperature variation in bull-nose end milling[J]. International Journal of Advanced Manufacturing Technology, 2016, 86(1-4):155-168.
[12] COZ G L, MARINESCU M, DEVILLEZ A, et al. Measuring temperature of rotating cutting tools:Application to MQL drilling and dry milling of aerospace alloys[J]. Applied Thermal Engineering, 2012, 36(1):434-441.
[13] KARAGUZEL U, BAKKAL M, BUDAK E. Modeling and measurement of cutting temperatures in milling[J]. Procedia CIRP, 2016, 46:173-176.
[14] LI L, CHANG H, WANG M, et al. Temperature measurement in high speed milling Ti6Al4V[J]. Key Engineering Materials, 2004, 259-260:804-808.
[15] MA Y, FENG P F, ZHANG J F, et al. Prediction of sur-face residual stress after end milling based on cutting force and temperature[J]. Journal of Materials Processing Technology, 2016, 235:41-48.
[16] SATO M, UEDA T, TANAKA H. An experimental technique for the measurement of temperature on CBN tool face in end milling[J]. International Journal of Machine Tools & Manufacture, 2007, 47(14):2071-2076.
[17] 王震宇. 高速立铣切削刀具温度场建模与实时在线温度测量技术研究[D]. 哈尔滨:哈尔滨理工大学, 2015:15-22. WANG Z Y. Study on the temperature field modeling and the real-time online temperature measuring technique for the high speed end mill[D]. Harbin:Harbin University of Science and Technology, 2015:15-22(in Chinese).
[18] ABUKHSHIM N A, MATIVENGA P T, SHEIKH M A. Heat generation and temperature prediction in metal cutting:A review and implications for high speed machining[J]. International Journal of Machine Tools and Manufacture, 2006, 46(7-8):782-800.
[19] SHAW M C. Metal cutting principles[M]. Oxford:Clarendon Press, 1984:15-43.
[20] ALTINTAS Y. 数控技术与制造自动化[M]. 罗学科, 译. 北京:化学工业出版社, 2002:26-35. ALTINTAS Y. Manufacturing automationmetal cutting mechanics, machine tool vibrations, and CNC design[M]. LUO X K, translated. Beijing:Chemical Industry Press, 2002:26-35(in Chinese).
[21] 舒畅. 高速铣削钛合金的切削温度研究[D]. 南京:南京航空航天大学, 2005:39-50. SHU C. Research on cutting temperature in high speed milling of titanium alloys[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2005:39-50(in Chinese).
[22] RICHARDSON D J, KEAVEY M A, DAILAMI F. Modelling of cutting induced workpiece temperatures for dry milling[J]. International Journal of Machine Tools & Manufacture, 2006, 46(10):1139-1145.
[23] 杨升, 董琼, 彭芳瑜, 等. 超高强度钢立铣工件温度分析及对加工表面质量的影响[J]. 航空学报, 2015, 36(5):1722-1732. YANG S, DONG Q, PENG F Y, et al. Workpiece temperature analysis and its impact on machined surface quality of ultra-high strength steel in end milling[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(5):1722-1732(in Chinese).
[24] SUNDQVIST B. Thermal diffusivity and thermal con-ductivity of Chromel, Alumel, and Constantan in the range 100-450 K[J]. Journal of Applied Physics, 1992, 72(2):539-545.
[25] SUI S C, FENG P F. The influences of tool wear on Ti6Al4V cutting temperature and burn defect[J]. Inter-national Journal of Advanced Manufacturing Technology, 2016, 85(9-12):1-8.
[26] CÔTÉ J, KONRAD J M. Thermal conductivity of base-course materials[J]. Canadian Geotechnical Journal, 2005, 42(1):61-78.
[27] 耿国盛. 钛合金高速铣削技术的基础研究[D]. 南京:南京航空航天大学, 2006:40-50. GENG G S. Fundamental research on high speed milling of titanium alloys[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2006:40-50(in Chinese).

Temperature prediction of tool/workpiece contact zone in titanium milling

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LUO Shengfeng, WANG Guangjian, MA Xiaobin, ZHENG Lili, WANG Ruijun. Simulation of flame spread of titanium-alloy sheet under effect of titanium droplet [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 425652-425652.
[2]	XIAO Guijian, LIU Shuai, HE Yi, LIU Gang, ZHU Shengwang, SONG Shayu. Defocus control and surface topography of titanium alloy laser belt processing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525603-525603.
[3]	PENG Zhenlong, ZHANG Xiangyu, ZHANG Deyuan. High-speed ultrasonic vibration cutting for difficult-to-machine materials in aerospace field [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525587-525587.
[4]	CHEN Bo, MENG Zheng, MA Chengyuan, XI Xin, WANG Xinxin, TAN Caiwang, SONG Xiaoguo. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525223-525223.
[5]	ZOU Qi, YE Yiyun, JIAO Junke, WU Zhisheng, XU Zifa, ZHANG Wenwu. Performance analysis of carbon fiber reinforced thermalsetting composite-titanium alloy laser joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625037-625037.
[6]	LIU Hao, CHEN Yuhua, ZHANG Wentao. Microstructure characteristics of Ti/Al lap joints with pinless friction stir spot welding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 624680-624680.
[7]	YANG Huanping, ZHUANG Wei, WANG Yaomian, YAN Wenbin. Influence of severe plastic deformation on thermal oxidation of titanium alloys [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 424656-424656.
[8]	ZHANG Zhiqiang, YANG Fan, ZHANG Hongwei, ZHANG Tiangang. Microstructure and wear resistance of TiC_x reinforced Ti-based laser cladding coating with rare earth [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 624115-624115.
[9]	DONG Zhigang, GAO Yu, KANG Renke, YANG Guolin, BAO Yan. Hole diameter deviation in helical milling of titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 423841-423841.
[10]	GUO Yidong, MA Yu'e, LI Peiyao. Low velocity impact response of additively manufactured titanium alloy micro-truss sandwich panels [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 423820-423820.
[11]	LI Yuanxiao, JIAO Feng, ZHANG Shijie, ZHANG Shun, WANG Xue, TONG Jinglin. Experiment on high and low frequency compound vibration-assisted drilling of CFRP/titanium alloy laminated structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524802-524802.
[12]	ZHANG Jikui, KONG Xiangyi, MA Shaojun, LIU Dong, WANG Xinbo, FENG Jun, WANG Huaming. Laser additive manufactured high strength-toughness TC11 titanium alloy: Mechanical properties and application in airframe load-bearing structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 525430-525430.
[13]	XIAO Guijian, HE Yi, HUANG Yun, LI Wei, LI Quan. Single particle removal model and experimental study on micro bionic zigzag surface of aeronautical blade using belt grinding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 623288-623288.
[14]	CHEN Lianguo, WANG Wensheng, ZHU Zhishou, ZHAO Yong, HUANG Jianyun, ZHANG Hai, PENG Fuhua. Development and application of large-scale damage tolerance titanium alloy TC4-DT [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(6): 523454-523454.
[15]	ZHAO Bo, LI Pengtao, ZHANG Cunying, WANG Xiaobo. Effect of ultrasonic vibration direction on milling characteristics of TC4 titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 623301-623301.