高低频复合振动钻削CFRP/钛合金叠层结构试验

doi:10.7527/S1000-6893.2020.24802

Abstract

Abstract: To overcome the problems of high cutting temperature and poor machining quality in the traditional drilling process of Carbon Fiber Reinforced Plastic (CFRP) and titanium alloy laminated structure, this paper proposes a processing method of high and low frequency compound vibration-assisted drilling of CFRP/titanium alloy laminated structure-assisted drilling based on the respective advantages of these two drilling methods. The self-developed high and low frequency compound vibration-assisted drilling device is used to carry out the drilling experiment of CFRP/titanium alloy laminated structure. The cutting force, titanium alloy chip morphology, cutting temperature and the hole processing quality of CFRP in four drilling modes (conventional drilling, ultrasonic vibration drilling, low frequency vibration drilling, and high and low frequency compound vibration-assisted drilling) are compared. The results show that among the four processing methods, in the high and low frequency compound vibration-assisted drilling, the thrust force fluctuation is relatively large, the cutting temperature is significantly reduced, the titanium alloy chips are discontinuous fan-shaped and the overall size is the smallest, and the damage degree of CFRP hole entrance and exit and surface is the lowest, demonstrating significant improvement of the machining quality. This study can provide guidance for the integrated drilling of laminated composite structure.

Key words: Carbon Fiber Reinforced Plastic (CFRP), titanium alloy, laminated structure, low frequency vibration drilling, ultrasonic vibration drilling, high and low frequency compound vibration-assisted drilling

CLC Number:

LI Yuanxiao, JIAO Feng, ZHANG Shijie, ZHANG Shun, WANG Xue, TONG Jinglin. Experiment on high and low frequency compound vibration-assisted drilling of CFRP/titanium alloy laminated structure[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524802-524802.

References

[1] DAVIM J P, REIS P. Drilling carbon fiber reinforced plastics manufactured by autoclave-Experimental and statistical study[J]. Materials & Design, 2003, 24(5):315-324.
[2] 焦锋, 王东. CFRP/钛合金叠层材料制孔技术的现状与展望[J]. 宇航材料工艺, 2018, 48(6):6-15. JIAO F, WANG D. Recent advances and prospects in hole-making for CFRP/Ti composite[J]. Aerospace Materials & Technology, 2018, 48(6):6-15(in Chinese).
[3] 丁文锋, 奚欣欣, 占京华, 等. 航空发动机钛材料磨削技术研究现状及展望[J]. 航空学报, 2019, 40(6):022763. DING W F, XI X X, ZHAN J H, et al. Research status and future development of grinding technology of titanium materials for aero-engines[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(6):022763(in Chinese).
[4] ZHANG P F, CHURI N J, PEI Z J, et al. Mechanical drilling processes for titanium alloys:A literature review[J]. Machining Science and Technology, 2008, 12(4):417-444.
[5] 赵波, 别文博, 王晓博, 等. 纵-扭复合超声钻削TC4钛合金振动系统设计与试验[J]. 航空学报, 2020, 41(1):423207. ZHAO B, BIE W B, WANG X B, et al. Design and experimental investigation on vibration system of longitudinal-torsional ultrasonic drilling TC4 titanium alloy[J]. Acta Aeronautica et Astronautica Sinica, 2020, 41(1):423207(in Chinese).
[6] PARK K H, BEAL A, KIM D W, et al. Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools[J]. Wear, 2011, 271(11-12):2826-2835.
[7] 赵波, 李鹏涛, 张存鹰, 等. 超声振动方向对TC4钛合金铣削特性的影响[J]. 航空学报, 2020, 41(2):623301. ZHAO B, LI P T, ZHANG C Y, et al. Effect of ultrasonic vibration direction on milling characteristics of TC4 titanium alloy[J]. Acta Aeronautica et Astronautica Sinica, 2020, 41(2):623301(in Chinese).
[8] XU J Y, MKADDEM A, EL MANSORI M. Recent advances in drilling hybrid FRP/Ti composite:A state-of-the-art review[J]. Composite Structures, 2016, 135:316-338.
[9] LIU D F, TANG Y J, CONG W L. A review of mechanical drilling for composite laminates[J]. Composite Structures, 2012, 94(4):1265-1279.
[10] XU J Y, ZHOU L, CHEN M, et al. Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks[J]. Materials and Manufacturing Processes, 2019, 34(7):715-725.
[11] XU J Y, EL MANSORI M. Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(1-4):657-675.
[12] SADEK A, MESHREKI M, ATTIA M H. Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates[J]. CIRP Annals, 2012, 61(1):123-126.
[13] ZHOU L, KE Y L, DONG H Y, et al. Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(1-4):811-824.
[14] SANDA A, ARRIOLA I, GARCIA NAVAS V, et al. Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V[J]. Journal of Manufacturing Processes, 2016, 22:169-176.
[15] ONAWUMI P Y, ROY A, SILBERSCHMIDT V V, et al. Ultrasonically assisted drilling of aerospace CFRP/Ti stacks[J]. Procedia CIRP, 2018, 77:383-386.
[16] 蒲景威, 高延峰, 舒嵘. CFRP/钛合金叠层材料超声振动辅助钻孔实验研究[J]. 机械设计与制造, 2019(8):98-101. PU J W, GAO Y F, SHU R. Experimental research on ultrasonic-assisted drilling of CFRP/Ti stacks[J]. Machinery Design & Manufacture, 2019(8):98-101(in Chinese).
[17] OKAMURA K, SASAHARA H, SEGAWA T, et al. Low-frequency vibration drilling of titanium alloy[J]. JSME International Journal Series C, 2006, 49(1):76-82.
[18] PECAT O, BRINKSMEIER E. Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material[J]. Procedia CIRP, 2014, 14:142-147.
[19] HUSSEIN R, SADEK A, ELBESTAWI M A, et al. Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material[J]. The International Journal of Advanced Manufacturing Technology, 2018, 98(9-12):2801-2817.
[20] 姚琦威, 陈燕, 杨浩骏, 等. 振幅对低频振动钻削CFRP/钛合金叠层材料的影响[J]. 航空制造技术, 2018, 61(6):64-69. YAO Q W, CHEN Y, YANG H J, et al. Influence of amplitude on low frequency vibration drilling CFRP/titanium alloy stack materials[J]. Aeronautical Manufacturing Technology, 2018, 61(6):64-69(in Chinese).
[21] 赵甘霖, 冯平法, 张建富. 钛合金超声振动钻削工艺特性仿真及试验研究[J]. 北京航空航天大学学报, 2019, 45(8):1597-1605. ZHAO G L, FENG P F, ZHANG J F. Simulation and experimental study on ultrasonic vibration drilling process characteristics of titanium alloy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(8):1597-1605(in Chinese).
[22] 闫明鹏, 邵华. 超声振动钻削钛合金的刀具温度和磨损分析[J]. 工具技术, 2011, 45(8):26-30. YAN M P, SHAO H. Analysis of temperature and wear of tool of ultrasonic vibration drilling Ti alloys[J]. Tool Engineering, 2011, 45(8):26-30(in Chinese).
[23] KARNIK S R, GAITONDE V N, RUBIO J C, et al. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model[J]. Materials & Design, 2008, 29(9):1768-1776.
[24] 陈文成, 王宏晓, 段玉岗, 等. 纤维方向对CFRP钻削温度场分布和孔壁质量的影响[J]. 宇航材料工艺, 2019, 49(6):61-68. CHEN W C, WANG H X, DUAN Y G, et al. Effect of fiber orientation on distribution of drilling temperature field and hole-wall quality of CFRP[J]. Aerospace Materials & Technology, 2019, 49(6):61-68(in Chinese).

Experiment on high and low frequency compound vibration-assisted drilling of CFRP/titanium alloy laminated structure

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LUO Shengfeng, WANG Guangjian, MA Xiaobin, ZHENG Lili, WANG Ruijun. Simulation of flame spread of titanium-alloy sheet under effect of titanium droplet [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 425652-425652.
[2]	XIAO Guijian, LIU Shuai, HE Yi, LIU Gang, ZHU Shengwang, SONG Shayu. Defocus control and surface topography of titanium alloy laser belt processing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525603-525603.
[3]	PENG Zhenlong, ZHANG Xiangyu, ZHANG Deyuan. High-speed ultrasonic vibration cutting for difficult-to-machine materials in aerospace field [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525587-525587.
[4]	CHEN Bo, MENG Zheng, MA Chengyuan, XI Xin, WANG Xinxin, TAN Caiwang, SONG Xiaoguo. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525223-525223.
[5]	LIU Hao, CHEN Yuhua, ZHANG Wentao. Microstructure characteristics of Ti/Al lap joints with pinless friction stir spot welding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 624680-624680.
[6]	ZOU Qi, YE Yiyun, JIAO Junke, WU Zhisheng, XU Zifa, ZHANG Wenwu. Performance analysis of carbon fiber reinforced thermalsetting composite-titanium alloy laser joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625037-625037.
[7]	YANG Huanping, ZHUANG Wei, WANG Yaomian, YAN Wenbin. Influence of severe plastic deformation on thermal oxidation of titanium alloys [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 424656-424656.
[8]	ZHANG Zhiqiang, YANG Fan, ZHANG Hongwei, ZHANG Tiangang. Microstructure and wear resistance of TiC_x reinforced Ti-based laser cladding coating with rare earth [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 624115-624115.
[9]	DONG Zhigang, GAO Yu, KANG Renke, YANG Guolin, BAO Yan. Hole diameter deviation in helical milling of titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 423841-423841.
[10]	GUO Yidong, MA Yu'e, LI Peiyao. Low velocity impact response of additively manufactured titanium alloy micro-truss sandwich panels [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 423820-423820.
[11]	ZHANG Jikui, KONG Xiangyi, MA Shaojun, LIU Dong, WANG Xinbo, FENG Jun, WANG Huaming. Laser additive manufactured high strength-toughness TC11 titanium alloy: Mechanical properties and application in airframe load-bearing structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 525430-525430.
[12]	XIAO Guijian, HE Yi, HUANG Yun, LI Wei, LI Quan. Single particle removal model and experimental study on micro bionic zigzag surface of aeronautical blade using belt grinding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 623288-623288.
[13]	CHEN Lianguo, WANG Wensheng, ZHU Zhishou, ZHAO Yong, HUANG Jianyun, ZHANG Hai, PENG Fuhua. Development and application of large-scale damage tolerance titanium alloy TC4-DT [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(6): 523454-523454.
[14]	ZHAO Bo, LI Pengtao, ZHANG Cunying, WANG Xiaobo. Effect of ultrasonic vibration direction on milling characteristics of TC4 titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 623301-623301.
[15]	DING Wenfeng, XI Xinxin, ZHAN Jinghua, XU Jiuhua, FU Yucan, SU Honghua. Research status and future development of grinding technology of titanium materials for aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 22763-022763.