复合材料紧固孔分层激光超声量化表征试验

doi:10.7527/S1000-6893.2013.0463

Abstract

Abstract:

An effective method for the detection of fastening hole delamination in composite aeronautical structures is proposed. Tests for the quantitative characterization of drilling-induced delamination in composites are conducted based on the laser ultrasonic technique. A specimen of carbon fiber reinforced plastic material is prepared, and the fastening holes are processed. Ultrasonic waves are generated by the thermo elastic effect of the material as it is illuminated by a pulse laser whose parameters are selected according to the principle of laser ultrasonic generation in composites. Ultrasonic signals that could be used to characterize the subsurface drilling-induced delamination are extracted. Major factors that might influence the characterization precision of the delamination are analyzed, and it can be seen that the dimension of the laser spot size (1-5 mm) has little influence on the characterization of the delamination. Typical C-scan testing of the specimen with laser ultrasonic technique is accomplished based on the transmission and pulse echo method, and the features of morphology, dimension and position of the drilling-induced delamination are obtained. The results prove that based on the advantages of the laser ultrasonic technique (e.g. non-contact generation and detection, high resolution), the drilling-induced delamination in composite aeronautical structures can be characterized effectively by measuring the wave reflection and attenuation induced by the delamination.

Key words: composites, nondestructive testing, drilling, delamination, laser ultrasonics

CLC Number:

V262
TB553

ZHOU Zhenggan, SUN Guangkai, CHEN Xiucheng, WANG Jie. Quantitative Characterization Test of Fastening Hole Delamination in Composites with Laser Ultrasonics[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(8): 2348-2354.

References

[1] Tsao C C, Hocheng H. Computerized tomography and C-scan for measuring delamination in the drilling of composite materials using various drills[J]. International Journal of Machine Tools & Manufacture, 2005, 45(11): 1282-1287.

[2] Tsao C C, Hocheng H, Chen Y C. Delamination reduction in drilling composite materials by active backup force [J]. CIRP Annals-Manufacturing Technology, 2012, 61(1): 91-94.

[3] Grilo T J, Paulo R M F, Silva C R M, et al. Experimental delamination analyses of CFRPs using different drill geometries[J]. Composites, 2013, 45(1): 1344-1350.

[4] Khashaba U A. Delamination in drilling GFR-thermoset composites[J]. Composite Structures, 2004, 63(3): 313-327.

[5] Davim J P, Rubio J C, Abrao A M. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates[J]. Composite Science and Technology, 2007, 67(9): 1939-1945.

[6] Robert E, Green J. Non-contact ultrasonic techniques[J]. Ultrasonics, 2004, 42(1): 9-16.

[7] He C F. Laser ultrasonic techniques and applications. Beijing: Department of Engineering Mechanics, Tsinghua University, 1995. (in Chinese) 何存富. 激光超声技术及其应用研究. 北京: 清华大学工程力学系, 1995.

[8] Geng R S, Zheng Y. Prospective view on the application of nondestructive testing in air industry and possible challenges[J]. Nondestructive Testing, 2002, 24(1): 1-5. (in Chinese) 耿荣生, 郑勇. 航空无损检测技术发展动态及面临的挑战[J]. 无损检测, 2002, 24(1): 1-5.

[9] Wright W M D, Hutchins D A, Gachagan A, et al. Polymer composite material characterization using a laser/air-transducer system[J]. Ultrasonics, 1996, 34(8): 825-833.

[10] Audoin B. Non-destructive evaluation of composite materials with ultrasonic waves generated and detected by lasers[J]. Ultrasonics, 2002, 40(1): 735-740.

[11] Liu S P, Guo E M, Liu F F, et al. Evaluation of defects in carbon fiber reinforced composites by laser ultrasonic technique[J]. Nondestructive Testing, 2007, 29(7): 396-398. (in Chinese) 刘松平, 郭恩明, 刘菲菲, 等. 激光超声检测碳纤维增强树脂基复合材料的缺陷评估技术研究[J]. 无损检测, 2007, 29(7): 396-398.

[12] Pan Y D, Qian M L, Xu W J, et al. Residual stress profiling of an aluminum alloy by laser ultrasonics[J]. Acta Acustica, 2004, 29(3): 254-257. (in Chinese) 潘永东, 钱梦騄, 徐卫疆, 等. 激光超声检测铝合金材料的残余应力分布[J]. 声学学报, 2004, 29(3): 254-257.

[13] Dubois M, Drake T E. Evolution of industrial laser-ultrasonic systems for the inspection of composites[J]. Nondestructive Testing and Evaluation, 2011, 26(3): 213-228.

[14] Dubois M, Drake T E, Osterkamp M. Low-cost ultrasonic inspection of composites for aerospace applications with LaserUT technology[J]. Journal of the Japanese Society for Non-Destructive Inspection, 2008, 57(1): 11-20.

[15] Zhou Z G, Sun G K, Li Z, et al. Application of laser ultrasonic testing technique on the detection of composite structures[J]. Journal of Harbin University of Science and Technology, 2012, 17(6): 119-122. (in Chinese) 周正干, 孙广开, 李征, 等. 激光超声检测技术在复合材料检测中的应用[J]. 哈尔滨理工大学学报, 2012, 17(6): 119-122.

[16] Dubois M, Lorraine P W, Filkins R J, et al. Experimental verification of the effects of optical wavelength on the amplitude of laser generated ultrasound in polymer-matrix composites[J]. Ultrasonics, 2002, 40(1): 809-812.

[17] Pavel A, Alexey K, Sridhar K, et al. Imaging of damage in sandwich composite structures[J]. Composites, 2004, 35(6): 557-562.

[18] Xu N, Zhou Z G, Liu W P, et al. Ultrasonic phased array inspection method for the corner of L-shaped components[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2): 419-425. (in Chinese) 徐娜, 周正干, 刘卫平, 等. L型构件R区的超声相控阵检测方法[J]. 航空学报, 2013, 34(2): 419-425.

Quantitative Characterization Test of Fastening Hole Delamination in Composites with Laser Ultrasonics

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Wenbin JIA, Lei FANG, Gen ZHANG, Jian SHI, Zekan HE, Haijun XUAN. Optimal design of fracture toughness for CNT⁃epoxy composites [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(7): 428971-428971.
[2]	Chunyun ZHANG, Xiongbin CHEN, Jian LIU, Miao CUI. Prediction of thermo⁃physical properties of inorganic⁃organic hybrid phenolic aerogel composites [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(6): 428848-428848.
[3]	Lingcai HUANG. Review of nondestructive testing methods for fiber⁃reinforced polymer composites [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(5): 529697-529697.
[4]	Hongyue WANG, Bing WANG, Guodong FANG, Songhe MENG. Digital element modelling and analysis of 2.5D woven shallow cross bending composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(9): 227478-227478.
[5]	Juan YANG, Jianghao NIU, Qingsong ZHANG. In⁃situ explosion limit of thermal runaway gas explosion in cyclic aging lithium⁃ion batteries: Experimental analysis [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(23): 428529-428529.
[6]	Yang SUN, Jian HUANG, Chenchen HAN, Zhenqiang ZHAO, Haili ZHOU, Fangfang SUN, Chao LI, Chao ZHANG, Liquan ZHANG. Comparison of in-plane mechanical properties of 2D and 3D woven composites [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(18): 428267-428267.
[7]	Kai SONG, Chi ZHANG, Chenhui YAN, Ning NING, Junling FAN, Rongbiao WANG. Reliability of aero-engine wheel model assisted eddy current testing based on two-parameter representation [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(13): 227866-227866.
[8]	Chao TANG, Wenjun XIE, Peiyu YUAN, Zonghong XIE. Development and verification of a conformal electrothermal deicing functional structure for leading edge of airfoil [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(12): 427872-427872.
[9]	Zhiwen LI, Changchun CAI, Huan YU, Zhifeng XU, Zhenjun WANG, Rongxing LI. Bending properties of composite braided structure T⁃shaped parts of C_f/Al composite material [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(10): 427510-427510.
[10]	DONG Song, ZHENG Kan, MENG Dan, LIAO Wenhe, SUN Lianjun. Robotic drilling of large complex components: A review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 627133-627133.
[11]	ZOU Qi, YE Yiyun, JIAO Junke, WU Zhisheng, XU Zifa, ZHANG Wenwu. Performance analysis of carbon fiber reinforced thermalsetting composite-titanium alloy laser joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625037-625037.
[12]	SHANG Yong, FENG Yang, LIU Qiaomu, WANG Junwu, YANG Huijun, RU Yi, ZHANG Heng, ZHAO Wenyue, PEI Yanling, LI Shusuo, GONG Shengkai. Research and application of large scientific facility on high-temperature structural materials and coatings of aero-engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527481-527481.
[13]	YANG Zhangang, SUI Zheng, ZHANG Qihao, LIU Jianying. Voltage drop in composite aircraft grounding and current return network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(1): 324859-324859.
[14]	ZHAO Chenwei, MAO Junkui, TU Zecan, QIU Penglin. Thermal analysis methods for high-temperature ceramic matrix composite components: Review and prospect [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 24126-024126.
[15]	DENG Jian, LU Tianjian, YIN Qiaozhi. Analysis on I-II mixed interlaminar crack propagation of composite MMB specimens [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 224241-224241.