[1] 孙杰, 李剑峰, 王中秋, 等. 航空整体结构件加工变形控制与校正关键技术[J]. 航空制造技术, 2009(23):62-66. SUN J, LI J F, WANG Z Q, et al. Key technology on processing deformation control and correction of aviation overall parts[J]. Aeronautical Manufacturing Technology, 2009(23):62-66(in Chinese).[2] MASOUDI S, AMINI S, SAEIDI E, et al. Effect of machining-induced residual stress on the distortion of thin-walled parts[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(1-4):597-608.[3] YANG Y, LI M, LI K R. Comparison and analysis of main effect elements of machining distortion for aluminum alloy and titanium alloy aircraft monolithic component[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(9-12):1803-1811.[4] 杨吟飞, 张峥, 李亮, 等. 7085铝合金残余应力及加工变形的数值仿真与试验[J]. 航空学报, 2014, 35(2):574-581. YANG Y F, ZHANG Z, LI L, et al. Numerical simulation and test of bulk residual stress and machining distortion in aluminum alloy 7085[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(2):574-581(in Chinese).[5] MASOUDI S, AMINI S, SAEIDI E, et al. Effect of machining-induced residual stress on the distortion of thin-walled parts[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(1-4):597-608.[6] MA Y, FENG P, ZHANG J, et al. Prediction of surface residual stress after end milling based on cutting force and temperature[J]. Journal of Materials Processing Technology, 2016, 235:41-48.[7] HUANG X, SUN J, LI J. Effect ofinitial residual stress and machining-induced residual stress on the deformation of aluminium alloy plate[J]. Strojniški Vestnik-Journal of Mechanical Engineering, 2015, 61(2):131-137.[8] 张峥. 飞机弱刚性铝合金结构件的残余应力和加工变形控制技术研究[D]. 南京:南京航空航天大学, 2015. ZHANG Z. Research on residual stress and machining distortion of aeronautic weak rigidity in aluminum structure[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2015(in Chinese).[9] 黄晓明, 孙杰, 李剑峰. 基于刚度与应力演变机制的航空整体结构件加工变形预测理论建模[J]. 机械工程学报, 2017, 49(9):201-208. HUANG X M, SUN J, LI J F. Mathematical modeling of aeronautical monolithic component machining distortion based on stiffness and residual stress evolvement[J]. Journal of Mechanical Engineering, 2017, 49(9):201-208(in Chinese).[10] CHANTZIS D, VAN-DER-VEEN S, ZETTLER J, et al. An industrial workflow to minimise part distortion for machining of large monolithic components in aerospace industry[J]. Procedia CIRP, 2013, 8:281-286.[11] LI B, JIANG X, YANG J, et al. Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part[J]. Journal of Materials Processing Technology, 2015, 216:223-233.[12] 刘长青. 基于动态加工特征的航空结构件智能加工关键技术[D]. 南京:南京航空航天大学, 2014. LIU C Q. The Key technologies of intelligent machining based on dynamic machining feature for aerospace structural parts[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2014(in Chinese).[13] 孙杰. 航空整体结构件数控加工变形校正理论和方法研究[D]. 杭州:浙江大学, 2003. SUN J. Study oncorrection theory and method for distorted aeronautical monolithic component due to NC machining[D]. Hangzhou:Zhejiang University, 2003(in Chinese).[14] 张洪伟, 张以都, 吴琼, 等. 基于有限元仿真的航空整体结构件变形校正[J]. 北京航空航天大学学报, 2007, 33(10):1251-1255. ZHANG H W, ZHANG Y D, WU Q, et al. Straightening technique for distorted aeronautical monolithic component based on finite element numerical simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(10):1251-1255(in Chinese).[15] 张洪伟, 张以都, 吴琼, 等. 航空整体结构件加工变形校正技术研究[J]. 兵工学报, 2010, 31(8):1072-1077. ZHANG H W, ZHANG Y D, WU Q, et al. Research on deformation straightening for aeronautical monolithic components[J]. Acta Armamentarii, 2010, 31(8):1072-1077(in Chinese).[16] PERENDA J, TRAJKOVSKI J, ŽEROVNIK A, et al. Residual stresses after deep rolling of a torsion bar made from high strength steel[J]. Journal of Materials Processing Technology, 2015, 218:89-98.[17] LIU Y, ZHAO X, WANG D. Determination of the plastic properties of materials treated by ultrasonic surface rolling process through instrumented indentation[J]. Materials Science and Engineering:A, 2014, 600:21-31.[18] DING H, WANG Y, CAI L. Laser shock forming of aluminum sheet:Finite element analysis and experimental study[J]. Applied Surface Science, 2010, 256(6):1703-1707.[19] 王中秋. 航空整体结构件加工变形滚压校正理论及方法研究[D]. 济南:山东大学, 2009. WANG Z Q. Study on theory and approach for correcting aerospace monolithic component due to machining distortion using rolling method[D]. Jinan:Shandong University, 2009(in Chinese).[20] LU L, SUN J. Investigation on distortion mechanism and correcting load calculation method for aluminum beam structure by bilateral rolling process[J]. Procedia CIRP, 2016, 57:781-786.[21] LU L, SUN J, LI Y, et al. A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(9-12):4121-4131.[22] S.铁摩辛柯, J.盖尔. 材料力学[M]. 胡人礼, 译. 北京:科学出版社, 1978. TIMOSHENKO S, GERE J. Mechanics of materials[M]. HU R L, translated. Beijing:Science Press Ltd., 1978(in Chinese).[23] 刘鸿文. 材料力学Ⅰ[M].5版. 北京:高等教育出版社, 2010. LIU H W. Mechanics of materials Ⅰ[M]. 5th ed. Beijing:China Higher Education Press, 2010(in Chinese).[24] 张炜, 刘立彬, 夏明莉, 等. 机翼缘条喷丸强化变形模拟与参数优化[J]. 航空制造技术, 2016(17):28-32. ZHANG W, LIU L B, XIA M L, et al. Simulation and optimization of shot peening deformation for aircraft wing flange[J]. Aeronautical Manufacturing Technology, 2016(17):28-32(in Chinese). |