[1] Jiao Z X, Gao J X, Hua Q, et al. The velocity synchronizing control on the electro-hydraulic load simulator. Chinese Journal of Aeronautics, 2004, 17(2): 39-46. [2] Hua Q. Studies on the key technology of electro-hydraulic load simulator. School of Automation Science and Electric Engineering, Beihang University, 2001. (in Chinese) 华清. 电液负载模拟器关键技术研究. 北京:北京航空航天大学自动化与电气工程学院, 2001. [3] Li Y H, Development of hybrid control of electro-hydraulic torque load simulator. Journal of Dynamic Systems, Measurement and Control, 2002, 124(3): 415-419. [4] Yao B, Bu F P, Reedy J, et al. Adaptive robust motion control of signal-rod hydraulic actuators: theory and experiments. IEEE/ASME Transactions on Mechatronics, 2000, 5(1):79-92. [5] Liu C N. Optimized design theory of hydraulic servo system. Beijing: China Metallurgical Industrial Press, 1989:131-143. (in Chinese) 刘长年. 液压伺服系统优化设计理论. 北京:冶金工业出版社, 1989: 131-143. [6] Wang J F, Ye Z M, Li H R. Study on eliminating the superfluous force of marine electrohydraulic load simulator applied with dual-valve parallel connected control. Chinese Journal of Mechanical Engineering, 2005, 41(4):229-234. (in Chinese) 王经甫, 叶正茂, 李洪人. 双阀并联控制在船舶舵机电液负载模拟器多余力抑制中的研究. 机械工程学报, 2005,41(4):229-234. [7] Hao J J, Zhao K D, Xu H G. Application of dual valve in electro hydraulic simulator. China Mechanical Engineering, 2002,13(10):814-816. (in Chinese) 郝经佳, 赵克定, 许宏光. 双阀控制在电液负载仿真台中的应用. 中国机械工程,2002,13(10): 814-816. [8] Li J Y, Shao J P, Wang Z W, et al. Study of the electro-hydraulic load simulator based on double servo valve concurrent control. Proceedings of 9th International Conference on Electronic Measurement & Instruments, 2009:699-705. [9] Plummer A R. Robust electro-hydraulic force control. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2007, 221(4):717-733. [10] Yan J, Sun L, Yang J, et al. Key technology in the development of high performance dynamic airload simulation system. Acta Aeronautica et Astronautica Sincia, 1997, 18(1):22-25. (in Chinese) 阎杰, 孙立, 杨军, 等. 动态负载仿真系统研制中的关键技术问题. 航空学报, 1997, 18(1):22-25. [11] Yu C Y, Yu X Z, Liu Q H, et al. Effects of shafting stiffness on new air dynamical load simulator. Acta Aeronautica et Astronautica Sincia, 2001, 22(2):148-151. (in Chinese) 于慈远, 于湘珍, 刘庆和, 等. 轴系刚度对新型空气动力负载模拟器的影响. 航空学报, 2001,22(2):148-151. [12] Wang M Y, Guo B, Wang J L. Analysis of the frequency width affected by inertia and stiffness. Electric Machines and Control, 2004,8(1):71-73.(in Chinese) 王明彦,郭犇,王金梁. 惯量和刚度对电动负载模拟器频宽影响分析. 电机与控制学报,2004,8(1):71-73. [13] Hao J J, Zhao K D, Xu H G. Study on the inference on the performance of the electro-hydraulic simulator by stiffness and inertia load. China Mechanical Engineering, 2002,13(6):458-461. (in Chinese) 郝经佳, 赵克定, 许宏光. 刚度、惯量负载对电液负载仿真台性能影响的研究. 中国机械工程, 2002, 13(6):458-461. [14] Zhang L X, Wang A M, Zhou J C. et al. Position synchronization compensation method for widening the bandwidth of aero-load simulator. Journal of Harbin Institute of Technology, 1995, 27(3):123-126. (in Chinese) 张立勋, 王安敏, 周继成, 等. 位置同步补偿提高飞行器负载模拟器频宽的研究. 哈尔滨工业大学学报, 1995, 27(3):123-126. [15] Wang A M, Zhang L X, Liu Q H, et al. Study on load simulator with new structure. Mechanical Engineer, 1994(6):4-5. (in Chinese) 王安敏, 张立勋, 刘庆和, 等. 新型结构负载模拟器研究. 机械工程师,1994 (6):4-5. [16] Zhang L X, Meng Q X, Liu Q H, et al. Experimental and theoretic study on eliminating the disturbance torque and widening the frequency band width of the load simulator using position synchro compensation. Journal of Harbin Institute of Technology, 1997,18(1):120-123. (in Chinese) 张立勋, 孟庆鑫, 刘庆和,等. 位置同步补偿克服负载模拟器干扰力矩及提高系统频宽的理论与实验研究. 哈尔滨工业大学学报, 1997,18(1):120-123. [17] Su D H, Wu S L, Fu X W, et al. Eliminating disturbance torque by angular velocity difference based on synchro-compensation. Journal of Harbin Institute of Technology, 2000,32(1):78-85. (in Chinese) 苏东海, 吴盛林,付兴武, 等. 利用基于同步补偿的角速度差值克服多余力矩. 哈尔滨工业大学学报, 2000,32(1):78-85. [18] Nam Y, Hong S K. Force control system design for aerodynamic load simulator. Control Engineering Practice, 2002, 10(5):549-558. [19] Niksefat N. Sepehri N. Design and experimental evaluation of a robust force controller for an electro-hydraulic actuator via quantitative feedback theory. Control Engineering Practice, 2000, 8(12):1335-1345. [20] Truong D Q, Ahn K K. Force control for hydraulic load simulator using self-tuning grey predictor-fuzzy PID. Mechatronics, 2009, 19(2): 233-246. [21] Truong D Q, Ahn K K, Soo K J, et al. Application of fuzzy-PID controller in hydraulic load simulator. Mechatronics and Automation, 2007, 24(8): 3338-3343. [22] Jiao Z X, Gao J X, Hua Q, et al. The velocity synchronizing control on the electro-hydraulic load simulator. Chinese Journal of Aeronautics, 2004, 17(1): 39-45. [23] Shang Y X, Wu S, Jiao Z X, et al, Study on ultimate performance of light-duty electro-hydraulic torque load simulator. Proceedings of 2008 IEEE Conference on Robotics, Automation and Mechatronics, 2008:387-392. [24] Jiao Z X, Hua Q, Wang X D, et al. Hydraulic control on the electro-hydraulic load simulator. Chinese Journal of Mechanical Engineering, 2002, 38(12):34-38.(in Chinese) 焦宗夏,华清,王晓东,等. 电液负载模拟器的复合控制. 机械工程学报,2002, 38(12): 34-38. |