电压加载下己二酸铵对2024-T3铝合金阳极氧化膜的封闭研究

doi:CNKI:11-1929/V.20101228.1335.004

Abstract

Abstract: In order to put forward a new sealing method,the sealing effect of ammonium adipate on anodic oxide films of aluminium alloy 2024-T3 under voltage loading is studied. The surface morphology and element contents of the anodic oxide films before and after the sealing are studied by using the field emission scanning electron microscopy (FE-SEM) and energy dispersive spectroscopy (EDS). Potentiodynamic polarization,electrochemical impedance spectroscopy (EIS) and salt spray tests are used to study the corrosion resistance of the anodic oxide films sealed by different methods. It is shown that, after the ammonium adipate sealing under voltage loading, the pores of the anodic oxide films are closed, the cavities of the anodic oxide films are filled, the defects of the barrier layer are repaired, and the thickness of the barrier layer is enhanced. The corrosion resistance of the films sealed by ammonium adipate under voltage loading is comparable to those sealed by potassium dichromate, and superior to the films sealed by boiling water.

Key words: aluminium alloy, anodic oxide film, loading voltage, ammonium adipate, sealing

CLC Number:

LI Yongxing, YU Mei, LIU Jianhua, LI Songmei, CHEN Gaohong. Sealing of Ammonium Adipate on Anodic Oxide Film of Aluminium Alloy 2024-T3 Under Voltage Loading[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2011, 32(7): 1326-1335.

References

[1] Keller F, Hunter M S, Robinson D L. Structural features of oxide coatings on aluminum[J]. Journal of the Electrochemical Society, 1953, 100(9): 411-419.

[2] Hao L, Cheng B R. Sealing processes of anodic coatings—past, present, and future[J]. Aluminum Finishing, 2000, 98(12): 8-18.

[3] 于兴文, 严川伟, 曹楚南. LY12铝合金阳极氧化稀土封孔方法及性能的研究[J]. 电镀与涂饰, 2001, 20(5): 1-4. Yu Xingwen, Yan Chuanwei, Cao Chunan. Studies on the process and property of rare earth sealing for anodized LY12 aluminum alloy[J]. Electroplating and Finishing, 2001, 20(5): 1-4. (in Chinese)

[4] Yu X W, Yan C W, Cao C N. Study on the rare earth sealing procedure of the porous film of anodized Al6061/SiCp[J]. Materials Chemistry and Physics, 2002, 76(3): 228-235.

[5] 李凌杰, 雷惊雷, 李荻, 等. 铈、锂盐对铝阳极氧化膜的协同封闭作用[J]. 物理化学学报, 2003, 19(10): 922-926. Li Lingjie, Lei Jinglei, Li Di, et al. Investigations of the synergism between cerium salt and lithium salt in the sealing of anodized film of aluminum[J]. Acta Physico-Chimica Sinica, 2003, 19(10): 922-926. (in Chinese)

[6] Bautista A, Gonzalez J A, Lopez V. Influence of triethanolamine additions on the sealing mechanism of anodised aluminium[J]. Surface and Coatings Technology, 2002, 154(1): 49-54.

[7] Shulman G P, Bauman A J. Organic acid sealants for anodized aluminum—a new method for corrosion protection[J]. Metal Fishing, 1995, 93(7): 16-19.

[8] 赵景茂, 陈胜利, 赵旭辉, 等. 铈盐在电场作用下对LY12 铝合金硫酸阳极氧化膜的封闭作用[J]. 中国表面工程, 2008, 21(1): 28-32. Zhao Jingmao, Chen Shengli, Zhao Xuhui, et al. The sealing effect of cerium salt on anodic film of LY12 aluminum alloy under electric filed[J]. China Surface Engineering, 2008, 21(1): 28-32. (in Chinese)

[9] 王祝堂. 阳极氧化膜新封孔法—微波水合封孔[J]. 轻金属, 2000(6): 52-55. Wang Zhutang. Advance in hyaration sealing of anodic oxide coatings: hydration sealing with microwaves[J]. Light Metals, 2000(6): 52-55. (in Chinese)

[10] 杨维春, 王宁, 尹春玲, 等. 磁场影响铝的阳极氧化膜的形成与封闭的研究[J]. 化工时刊, 2007, 21(5): 11-13. Yang Weichun, Wang Ning, Yin Chunling, et al. A study of the effect magnetic field on the formation and sealing of the anodizing film of aluminum[J]. Chemical Industry Times, 2007, 21(5): 11-13. (in Chinese)

[11] 刘建华, 李明, 李松梅, 等. 挤压成型对LC4CS铝合金棒材阳极氧化膜结构的影响[J]. 航空学报, 2009, 30(2): 368-373. Liu Jianhua, Li Ming, Li Songmei, et al. Effect of extrusion on microstructure of anodic oxide films formed on LC4CS aluminium alloy bars[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(2): 368-373. (in Chinese)

[12] Garcia-Vergara S J, El Khazmi K, Skeldon P, et al. Influence of copper on the morphology of porous anodic alumina[J]. Corrosion Science, 2006, 48(4-5): 2937-2946.

[13] Habazaki H, Zhou X, Shimizu K, et al. Mobility of copper ions in anodic alumina films[J]. Electrochimica Acta, 1997, 42(17): 2627-2635.

[14] Liu J H, Li M, Li S M, et al. Effect of microstructure of anodic oxide formation in sulfuric acid[J]. International Journal of Mineals, Metallurgy and Materials, 2009, 16(4): 432-438.

[15] Lopez V, Bartolome M J, Escudero E, et al. Comparison by SEM, and EIS of hydrothermally sealed and cold sealed aluminum anodic oxides[J]. Journal of the Electrochemical Society, 2006, 153(3): B75-B82.

[16] Landry C C, Pappé N, Mason M R, et al. From minerals to materials: synthesis of alumoxanes from the reaction of boehmite with carboxylic acids[J]. Journal of Materials Chemistry, 1995, 5(2): 331-338.

[17] Kendig M, Jeanjaquet S, Addison R, et al. Role of hexavalent chromium in the inhibition of corrosion of aluminum alloys[J]. Surface and Coatings Technology, 2001, 140(1): 58-66.

[18] 郭鹤桐, 王为. 铝阳极氧化的回顾与展望[J]. 材料保护, 2001, 33(1): 43-45. Guo Hetong, Wang Wei. Restrospect and prospect of aluminium anodizing[J]. Journal of Material Protection, 2001, 33(1): 43-45. (in Chinese)

[19] Ono S, Wada C, Asoh H. Structure and property of anodic barrier films formed on aluminum in low voltage range[J]. Electrochimica Acta, 2005, 50(25-26): 5103-5110.

[20] Suay J J, Gimenez E, Rodriguez T, et al. Characterization of anodized and sealed aluminium by EIS[J]. Corro- sion Science, 2003, 45(3): 611-624.

[21] Hitzig J, Junttner K, Lorentz W J, et al. AC-impedance measurements on porous aluminium oxide films[J]. Corrosion Science, 1984, 24(11-12): 945-952.

[22] Hitzig J, Junttner K, Lorentz W J. AC-impedance measurements on corroded porous aluminum oxide films[J]. Journal of the Electrochemical Society, 1986, 133(5): 887-892.

[23] Feliu S, Gonzlez J A, López V, et al. Characterisation of porous and barrier layers of anodic oxides on different aluminium alloys[J]. Journal of Applied Electrochemistry, 2007, 37(9): 1027-1037.

[24] Potucek R K, Rateick R G, Birss V I. Impedance characterization of anodic barrier Al oxide film beneath porous oxide layer[J]. Journal of the Electrochemical Society, 2006, 153(8): B304-B310.

[25] Moutarlier V, Gigandet M P, Normand B, et al. EIS characterisation of anodic films formed on 2024 aluminium alloy, in sulphuric acid containing molybdate or permanganate species[J]. Corrosion Science, 2005, 47(4): 937-951.

[26] Akeret R, Bichsel H, Schwall E, et al. The influence of chemical composition and fabrication procedures on the properties of anodised aluminium surfaces[J]. Transactions of the Institute of Metal Finishing, 1990, 68(1): 20-28.

[27] Garcia-Rubio M, Ocon P, Curioni M, et al. Degradation of the corrosion resistance of anodic oxide films through immersion in the anodising electrolyte[J]. Corrosion Science, 2010, 52(7): 2219-2227.

Sealing of Ammonium Adipate on Anodic Oxide Film of Aluminium Alloy 2024-T3 Under Voltage Loading

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Qingcai ZHANG, Song LIU, Qinqin WANG, Xiaoming TAN, Jingzhou ZHANG, Wen GUO. Experiment on composite rim seal with deep cavity in static disc and modified platform [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(5): 126719-126719.
[2]	LIU Xin, YANG Jingchao, LI Heng, ZHANG Yanhong, YANG Zhiwei, GU Jingfei, LI Guangjun, HUANG Dan. Critical review on tube joining by plastic deformation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525258-525258.
[3]	PAN Lixin, YANG Jiayong, WANG Man, KONG Bin. Cabin environment design and application for hypersonic vehicle [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(S1): 46-52.
[4]	ZHU Yu, WAN Min. External pressure forming of thin walled W-shaped sealing rings in aircraft engines using movable dies [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(7): 2457-2467.
[5]	LIU Jianhua, YANG Kang, YU Mei, LI Songmei, WU Liang, YU Xiumei. Preparation, Characterization and Fatigue Performance of Anodic Oxide Film on Titanium Alloy TC18 in Sodium Tartrate Electrolyte [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(3): 902-910.
[6]	JIN Quanlin, LIU Xiaofei. Numerical Simulation and Experimental Validation of Grain Size Evolution During Double-sided Isothermal Roll Forming for Aluminum Alloy Discal Parts [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(2): 335-346.
[7]	Liu Jianhua;Wu Liang;Li Songmei;Yu Mei;Yi Junlan. Preparation and Characterization of Anodic Oxide Film on Titanium AlloyTi-10V-2Fe-3Al in Sodium Oxalate Electrolyte [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2010, 31(4): 852-856.
[8]	Bi Zhongnan;Dong Jianxin;Zhang Maicang;Zheng Lei;Zhang Qingquan. Experimental Study and Theoretical Calculation on Structure Stability of a Nickel-based Superalloy for Seals in Aero-engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2010, 31(3): 643-649.
[9]	Bian Guixue;Chen Yueliang;Zhang Danfeng;Yu Pinshi. Study on Fatigue Life of Pre-corroded Aluminium Alloy Based on IDS [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2008, 30(6): 1526-1530.
[10]	Zhang Hong;Yu Chengye. EFFECTS OF LASER SHOCK PROCESSING ON THE FATIGUE CRACK GROWTH RATES OF ALUMINIUM ALLOY [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1999, 20(1): 62-64.
[11]	Li Di;Zhang Qi;Wang Dizhen;Guo Baolan;Zhang Yumei. THE ELECTROCHEMICAL CORROSION BEHAVIOUR OF THE INTERMETALLIC COMPOUNDS OF LY12CZ ALUMINIUM ALLOY [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1997, 18(3): 299-303.
[12]	Shen Yingjun Ji Daoxin;Xu Yongli;Chen Changqi. THE DEVELOPMENT OF RAPID RESOLIDIFIED Al-Fe-MRE HIGH TEMPERATURE ALUMINUM ALLOY [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1995, 16(5): 539-544.
[13]	Li Di;Guo Baolan;Zhang Yumei. THE MEASUREMENT OF THE EXFOLIATION RATE OF ALUMINIUM ALLOYS [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1995, 16(3): 49-53.
[14]	Liu Shaolun;Wang Shuzhi;Ouyang Hui;Yue Junwen. INFLUENCEOFSEAWATER, STRESS RATIO AND FREQUENCY ONFATIGUE CRACK GROWTH BEHAVIOR IN ALLOY 2124T851 [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1994, 15(11): 1362-1369.
[15]	Liu Run-guang;Wang Zhong-ren Zhang Xi-ning;Deng Shao-ping. DEFECTS ANALYSIS OF LY12 ALLOY WING IN ISOTHERMAL FORGING [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1993, 14(6): 313-316.