挤压孔边残余应力的测定与计算

Abstract

Abstract: An engineering method, a semi-experimental and semi-theoretical method are presented for determining the residual stresses at the edges of cold-worked open holes. A nondestructive method, i. e. the common Moire method, to measure the strains at the edges of holes is used. When the mandrel is pushed in and pulled out, respectively, based on these measured strains the residual stresses at the edges of cold-worked open holes are calculated by following loading path. The procedures of determining the residual stresses are explained in details.

Key words: residual stress, residual strain, Moire method

Xing Wenzhen;Wu Fumin. MEASUREMENTS AND CALCULATIONS OF RESIDUAL STRESSES AT THE EDGES OF COLD-WORKED HOLES[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1991, 12(2): 56-60.

[1]	Laixiao LU, Changguan XU, Jianhua LIU, Meizhen QIN, Yingbo LYU, Yuqin YAN. Influence of initial stress state on bilateral rolling process of thin⁃walled part [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(10): 427415-427415.
[2]	LIU Zhendong, ZHENG Xitao, FAN Wenjing, ZHANG Dongjian. Effect of process-induced residual stress on strength of UAV composite wing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526117-526117.
[3]	LI Hui, LI Guangxian, GAO Ruilin, JIN Xin, LIU Lu, LI Chaojiang, Songlin DING. Research progress of post-processing of stainless steel additive manufacturing parts [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525847-525847.
[4]	SHANG Yong, FENG Yang, LIU Qiaomu, WANG Junwu, YANG Huijun, RU Yi, ZHANG Heng, ZHAO Wenyue, PEI Yanling, LI Shusuo, GONG Shengkai. Research and application of large scientific facility on high-temperature structural materials and coatings of aero-engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527481-527481.
[5]	WANG Lianqing, HU Ya'nan, CHE Zhigang, WU Shengchuan. Fatigue performance of laser shock processed fusion welded 7075 Al alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524320-524320.
[6]	HAN Kunpeng, ZHANG Dinghua, YAO Changfeng, TAN Liang, ZHOU Zheng. Fatigue evolution and anti-fatigue mechanism of surface characteristics induced by deep rolling: A review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524302-524302.
[7]	ZHAO Bo, JIANG Yan, BIE Wenbo. Ultrasonic rolling technology in surface strengthening: Progress in research and applications [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(10): 23685-023685.
[8]	DU Xu, ZHANG Teng, HE Yuting, ZHANG Tianyu, ZHANG Sheng, FENG Yu. Determining position of reaming interface in cold expansion FEM simulation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(4): 422674-422674.
[9]	GOU Lei, MA Yu'e, DU Yong, LIU Lei, GUO Chao, LI Gang. Residual stress profile and fatigue life of 7050 aluminum plate with groove under laser shot peening [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(12): 423096-423096.
[10]	WANG Yanli, ZHU Youli, CAO Qiang, ZHANG Xiaohui. Progress and prospect of research on hole cold expansion technique [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(2): 21336-021336.
[11]	WANG Xiaoming, ZHU Sheng, YANG Baijun, ZHANG Yao, XU Anyang. Aluminum-based metallic glass coatings prepared with magnetic field assisted laser cladding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(11): 422134-422142.
[12]	ZHAN Zhixin, TONG Yang, LI Binkai, HU Weiping, MENG Qingchun. Fatigue life prediction for titanium plate considering impact defect [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(7): 2200-2207.
[13]	YANG Sheng, DONG Qiong, PENG Fangyu, LIN Sen, YAN Rong. Workpiece temperature analysis and its impact on machined surface quality of ultra-high strength steel in end milling [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(5): 1722-1732.
[14]	KANG Chao, SHI Yaoyao, HE Xiaodong, ZHANG Jun, ZHANG Xiaoyang. Variable tension dynamic control for filament winding of cylinder using neural network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(4): 1339-1347.
[15]	JING Zhi, WU Xueren, TONG Dihua, CHEN Bo. Determination of welding residual stress intensity factors by weight function methods [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(11): 3586-3594.

MEASUREMENTS AND CALCULATIONS OF RESIDUAL STRESSES AT THE EDGES OF COLD-WORKED HOLES

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments