系统工程在大型客机运行支持系统研制中的应用综述

doi:10.7527/S1000-6893.2018.22376

Abstract

Abstract: Applying up-to-date system engineering approach to the development of commercial aircraft operation support system, this paper analyzes the complete process of operation support system development from stakeholder needs definition, function analysis, requirement definition and airworthiness constraints, system architecture definition, interface definition, design integration, verification & validation, and airworthiness operation review. A commercial aircraft operation support lifecycle process model is defined and illustrated. This approach effectively divides the top level aircraft operation requirements into the aircraft requirements and operation support system requirements. By combining the aircraft development process with the operation support system development process through process integration and technical integration, this approach ensures the commercial aircraft meets not only the requirements of Type Certificate (TC) and Aircraft Evaluation Group (AEG), but also the airlines' requirements of safety and economical operation.

Key words: system engineering, operation support system, function analysis, performance requirements & constraints, design integration, verification & validation

CLC Number:

MA Xiaojun, PENG Huanchun. Review on development of commercial aircraft operation support system based on system engineering approach[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(1): 522376-522376.

References

[1] SAE Aerospace. Guidelines for development of civil aircraft and systems:SAE ARP 4754A[S]. Warrendale, PA:SAE International, 2010.
[2] ISO/IEC/IEEE. Systems and software engineering-System life cycle processes:ISO 15288[S]. Geneva:International Organization for Standardization, 2008.
[3] Federal Aviation Administration. FAA system engineering handbook[M]. Washington, D.C.:Federal Aviation Administration, 2006.
[4] JACKSON S. Systems engineering for commercial aircraft:A domain-specification adaptation[M]. 2nd ed. London:Routledge Taylor & Francis Group, 2015:9-14.
[5] 汉斯-亨利奇·阿尔特菲尔德. 商用飞机项目——复杂高端产品的研发管理[M]. 唐长红, 等, 译, 北京:航空工业出版社, 2013:1-20. ALTFELD H H. Commercial aircraft projects-Managing the development of highly complex products[M]. TANG C H, et al., translated. Beijing:Aviation Industry Press, 2013:1-20(in Chinese).
[6] 贺东风, 赵越让, 钱仲焱, 等. 中国商用飞机有限责任公司系统工程手册[M]. 上海:上海交通大学出版社, 2017:1-16. HE D F, ZHAO Y R, QIAN Z Y, et al. COMAC systems engineering manual[M]. Shanghai:Shanghai Jiao Tong University Press, 2017:1-16(in Chinese).
[7] SANDERS A, KLEIN J. Systems engineering framework for integrated product and industrial design including trade study optimization[J]. Procedia Computer Science, 2012, (2):413-419.
[8] INCOSE. System engineering handbook-A guide for system life cycle processes and activities[M]. 3rd ed. New York:John Wiley & Sons, Inc., 2006:1-60.
[9] ATA. Operator/manufacturer scheduled maintenance development:ATA MSG-3[S]. Washington, D.C.:Air Transport Association of America Inc., 2011.
[10] ATA. Aviation industry standards for digital information security:ATA Specification 42(Spec 42)[S]. Washington, D.C.:Air Transport Association of America Inc., 2010.
[11] ATA. Ground equipment technical data:ATA Specification 101(Spec 101)[S]. Washington, D.C.:Air Transport Association of America Inc., 1986.
[12] ATA. E-business specification materiel's management:ATA Specification 2000(Spec 2000)[S]. Washington, D.C.:Air Transport Association of America Inc., 2009.
[13] ATA. Information standards for aviation maintenance:ATA Specification 2200(Spec 2200)[S]. Washington, D.C.:Air Transport Association of America Inc., 2000.
[14] ATA. Data exchange standard for flight operations:ATA Specification 2300(Spec 2300)[S]. Washington, D.C.:Air Transport Association of America Inc., 1999.
[15] ATA. World airlines and suppliers guide[S]. Washington, D.C.:Air Transport Association of America Inc., 2015.
[16] ASD, AIA, ATA. International specification for technical publications utilizing a common source database (Issue 4.2):S1000D[S]. Brussel:Aerospace and Defense Industries Association of Europe; Arlington:Aerospace Industries Association; Washington, D.C.:Air Transport Association of America Inc., 2016.
[17] ASD. International specification for material management (Issue 6.0):S2000M[S]. Brussel:Aerospace and Defense Industries Association of Europe, 2015.
[18] ASD, AIA. International procedure specification for logistic support analysis (Issue 1.1):S3000L[S]. Brussel:Aerospace and Defense Industries Association of Europe; Arlington:Aerospace Industries Association, 2014.
[19] ASD, AIA. International specification for developing and continuously improving preventive maintenance (Issue 1.0):S4000P[S]. Brussel:Aerospace and Defense Industries Association of Europe; Arlington:Aerospace Industries Association, 2014.
[20] ASD, AIA. International specification for in-service data feedback (Issue 1.0):S5000F[S]. Brussel:Aerospace and Defense Industries Association of Europe; Arlington:Aerospace Industries Association, 2016.
[21] IATA. Flight simulation training device design & performance data requirements[S]. 7th ed. Montreal:The International Air Transport Association, 2009.
[22] ARINC. Guidance for design of aircraft equipment and software for use in training device:ARINIC 610C[S]. Annapolis:Aeronautical Radio Inc., 2009.

Review on development of commercial aircraft operation support system based on system engineering approach

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 10

Recommended Articles

Metrics

Comments

[1]	PEI Zhaoyu, KANG Yan, MA Jinan, ZHAO Chen, MA Xiaoshan. Model-based collaborative demonstration method for International Lunar Research Station [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 226066-226066.
[2]	ZHANG Bainan, QI Faren, XING Tao, LIU Yang, WANG Wei. Model based development method of manned spacecraft: Research and practice [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 23967-023967.
[3]	BAO Xiaoning, ZHAO Peilin, ZHANG Baozhong, HU Zhiwen, LAN Yuqing, XUE Fei. Life support system in advanced fighter [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(6): 523464-523464.
[4]	HU Xiaoyi, WANG Ruping, WANG Xin, FU Yongtao. Recent development of safety and reliability analysis technology for model-based complex system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(6): 523436-523436.
[5]	ZHU Hequan, XU Haojun, ZHANG Peng, ZHANG Dengcheng, SUN Xi. Model-driven validation method for software component development assurance level [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(3): 907-920.
[6]	ZHOU Tianran, XIONG Huagang. Two-level Hierarchical Scheduling for Hybrid Real-time Tasks in Avionic Systems [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2011, 32(6): 1067-1074.
[7]	XIONG Hua-gang;ZHOU Gui-rong;LI Qiao. A Survey on Avionics Bus and Network Interconnections and Their Progress [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2006, 27(6): 1135-1144.
[8]	SUN Yao;ZHU Lin;XU Xing-jie;ZHANG Xiao-nan. Design of C³I Information Fusion System Architecture Basing on Data Fusion Tree [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2006, 27(2): 305-309.
[9]	Yang Weimin;Ruan Lian;Tu Qingci. RELIABILITY SYSTEM ENGINEERING——THEORY AND PRACTICE [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1995, 16(S1): 1-8.
[10]	Wang Xiantong;Yang Qingxiong. NEURAL NETWORK METHOD FOR FITTING FATIGUE EXPERIMENTAL CURVES [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1994, 15(3): 359-361.