[1] KIM S J, MUN B M, BAE S J.A cost-driven reliability demonstration plan based on accelerated degradation tests[J].Reliability Engineering & System Safety, 2019, 183:226-239. [2] SUNG S.Optimal design of ramp-stress accelerated degradation tests based on the Wiener process[J].Microelectronics Reliability, 2019, 100-101:113393. [3] 周源泉, 翁朝曦, 叶喜涛.论加速系数与失效机理不变的条件(Ⅰ):寿命型随机变量的情况[J].系统工程与电子技术, 1996(1):55-67. ZHOU Y Q, WENG Z X, YE X T.Study on accelerated factor and conditionfor constant failure mechanism(Ⅰ)-The case for lifetime is a random variable[J].Systems Engineering and Electronics, 1996(1):55-67(in Chinese). [4] 郑志腾, 董澍, 徐丹君, 等.基于POF的温度应力加速试验失效机理一致性研究[J].装备环境工程, 2016, 13(6):104-109. ZHENG Z T, DONG S, XU D J, et al.Failure mechanism consistency of accelerated test for POF based temperature stress[J].Equipment Environmental Engineering, 2016, 13(6):104-109(in Chinese). [5] 庄琼云, 潘书万, 陈松岩, 等.GaN基绿光LED芯片电流加速失效机理研究[J].光电子·激光, 2019, 30(6):588-592. ZHUANG Q Y, PAN S W, CHEN S Y, et al.Degradation mechanisms of GaN-based green LED after accelerated DC current aging[J].Journal of Optoelectronics·Laser, 2019, 30(6):588-592(in Chinese). [6] 林逢春, 王前程, 陈云霞, 等.基于伪寿命的加速退化机理一致性边界检验[J].北京航空航天大学学报, 2012, 38(2):233-238. LIN F C, WANG Q C, CHEN Y X, et al.Pseudo-life-based test method of mechanism consistency boundary for accelerated degradation testing[J].Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(2):233-238(in Chinese). [7] 郭春生, 万宁, 马卫东, 等.恒定温度应力加速实验失效机理一致性快速判别方法[J].物理学报, 2013, 62(6):478-482. GUO C S, WAN N, MA W D, et al.Rapid identification of the consistency of failure mechanism for constant temperature stress accelerated testing[J].Acta Physica Sinica, 2013, 62(6):478-482(in Chinese). [8] 李晓钢, 王亚辉.利用非等距灰色理论方法判定失效机理一致性[J].北京航空航天大学学报, 2014, 40(7):899-904. LI X G, WANG Y H.Identification method of failure mechanism consistency by non-equidistance grey theory model[J].Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(7):899-904(in Chinese). [9] 鲁相, 汪亚顺, 陈循, 等.基于似然比检验的橡胶密封件加速试验机理一致性判别方法[J].国防科技大学学报, 2019, 41(2):144-149. LU X, WANG Y S, CHEN X, et al.Identification method of mechanism consistency for rubber seals accelerated testing based on likelihood ratio test[J].Journal of National University of Defense Technology, 2019, 41(2):144-149(in Chinese). [10] 奚文骏, 王浩伟, 王瑞奇.基于加速系数不变原则的失效机理一致性判别[J].北京航空航天大学学报, 2015, 41(12):2198-2204. XI W J, WANG H W, WANG R Q.Failure mechanism consistency identification based on acceleration coefficient constant principle[J].Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(12):2198-2204(in Chinese). [11] 王浩伟, 徐廷学, 王伟亚.基于退化模型的失效机理一致性检验方法[J].航空学报, 2015, 36(3):889-897. WANG H W, XU T X, WANG W Y.Test method of failure mechanism consistency based on degradation model[J].Acta Aeronautica et Astronautica Sinica, 2015, 36(3):889-897(in Chinese). [12] 王浩伟, 徐廷学, 赵建忠.融合加速退化和现场实测退化数据的剩余寿命预测方法[J].航空学报, 2014, 35(12):3350-3357. WANG H W, XU T X, ZHAO J Z.Residual life prediction method fusing accelerated degradation and field degradation data[J].Acta Aeronautica et Astronautica Sinica, 2014, 35(12):3350-3357(in Chinese). [13] WANG L Z, PAN R, LI X Y, et al.A Bayesian reliability evaluation method with integrated accelerated degradation testing and field information[J].Reliability Engineering & System Safety, 2013, 112:38-47. [14] STIASNY T, QUITTARD O, WALTISBERG C, et al.Reliability evaluation of IGCT from accelerated testing, quality monitoring and field return analysis[J].Microelectronics Reliability, 2018, 88-90:510-513. [15] 陈震, 潘浩, 潘尔顺.恒定应力加速退化试验差异化设计[J].系统工程与电子技术, 2019, 41(4):931-938. CHEN Z, PAN H, PAN E S.Differentiated design of constant stress accelerated degradation test[J].Systems Engineering and Electronics, 2019, 41(4):931-938(in Chinese). [16] 李晓阳, 姜同敏.基于加速退化模型的卫星组件寿命与可靠性评估方法[J].航空学报, 2007, 28(增刊1):100-103. LI X Y, JIANG T M.Constant-stress accelerated degradation testing of satellite assemblies[J].Acta Aeronautica et Astronautica Sinica, 2007, 28(S1):100-103(in Chinese). [17] 谭源源, 张春华, 陈循.竞争失效场合步进应力加速试验统计分析[J].航空学报, 2011, 32(3):429-437. TAN Y Y, ZHANG C H, CHEN X.Analysis of step stress accelerated testing with competing failure modes[J].Acta Aeronautica et Astronautica Sinica, 2011, 32(3):429-437(in Chinese). [18] HAN D.Expected termination times of progressively Type-I censored step-stress accelerated life tests under continuous and interval inspections[J].Statistica Neerlandica, 2020, 74(2):112-124. [19] 郭春生, 李志国, 马卫东, 等.基于序进应力加速试验评价器件寿命的方法[J].北京工业大学学报, 2007(1):15-19. GUO C S, LI Z G, MA W D, et al.A method to determine the lifetime of semiconductor devices using process-stress accelerated test[J].Journal of Beijing University of Technology, 2007(1):15-19(in Chinese). [20] ABDEL-HAMID A H, AL-HUSSAINI E K.Inference for a progressive stress model from Weibull distribution under progressive type-II censoring[J].Journal of Computational and Applied Mathematics, 2011, 235(17):5259-5271. [21] ZHAI Q Q, CHEN P, HONG L Q, et al.A random-effects Wiener degradation model based on accelerated failure time[J].Reliability Engineering & System Safety, 2018, 180:94-103. [22] WANG H W, KANG R.Modeling of degradation data via Wiener stochastic process based on acceleration factor constant principle[J].Applied Mathematical Modelling, 2020, 84:19-35. [23] RODRÍGUEZ-PICÓN L A, RODRÍGUEZ-PICÓN A P, ALVARADO-INIESTA A.Degradation modeling of 2 fatigue-crack growth characteristics based on inverse Gaussian processes:a case study[J].Applied Stochastic Models in Business and Industry, 2019, 35(3):504-521. [24] MA Z H, WANG S P, LIAO H T, et al.Engineering-driven performance degradation analysis of hydraulic piston pump based on the inverse Gaussian process[J].Quality and Reliability Engineering International, 2019, 35(7):2278-2296. [25] WANG H W, XU T X, MI Q L.Lifetime prediction based on Gamma processes from accelerated degradation data[J].Chinese Journal of Aeronautics, 2015, 28(1):172-179. [26] OUMOUNI M, SCHOEFS F, CASTANIER B.Modeling time and spatial variability of degradation through gamma processes for structural reliability assessment[J].Structural Safety, 2019, 76:162-173. [27] FERSON S, OBERKAMPF W L, GINZBURG L.Model validation and predictive capability for the thermal challenge problem[J].Computer Methods in Applied Mechanics and Engineering, 2008, 197(29-32):2408-2430. [28] FERSON S, OBERKAMPF W L.Validation of imprecise probability models[J].International Journal of Reliability and Safety, 2009, 3(1/2/3):3. [29] LI W, CHEN W, JIANG Z, et al.New validation metrics for models with multiple correlated responses[J].Reliability Engineering & System Safety, 2014, 127:1-11. [30] 张保强, 苏国强, 展铭, 等.概率盒框架下多响应模型确认度量方法[J].控制与决策, 2019, 34(12):2642-2648. ZHANG B Q, SU G Q, ZHAN M, et al.Model validation metrics with multiple correlated responses under the frame of probability box[J].Control and Decision, 2019, 34(12):2642-2648(in Chinese). [31] 锁斌, 张红平.SnPb焊点贮存失效机理分析与寿命评估[C]//2017年全国失效分析学术会议.北京:中国机械工程学会, 2017:55-61. SUO B, ZHANG H P.Failure mechanism analysis and life evaluation of SnPb solder joints[C]//2017 National Conference on Failure Analysis.Beijing:Chinese Mechanical Engineering Society, 2017:55-61. |