[1] 许和勇,叶正寅.涵道螺旋桨与孤立螺旋桨气动特性的数值模拟对比[J].航空动力学报, 2011, 26(12):2820-2825. XU H Y, YE Z Y. Numerical simulation and comparison of aerodynamic characteristics between ducted and isolated propellers[J]. Journal of Aerospace Power, 2011, 26(12):2820-2825(in Chinese). [2] CONEY W B. A method for the design of a class of optimum marine propulsors[D]. Cambridge:Massachusetts Institute of Technology, 1989:68-80. [3] STUBBLEFIELD J M. Numerically-based ducted propeller design using vortex lattice lifting line theorys[D]. Cambridge:Massachusetts Institute of Technology, 2008:8-48. [4] KERWIN J E, CONEY W B, Hsin C. Optimum circulation distributions for single and multi-component propulsors[C]//Twenty-First American Towing Tank Conference, 1986. [5] EPPS B P, KIMBALL R W. Unified rotor lifting line theory[J]. Journal of Ship Research, 2013, 57(4):181-201. [6] EPPS B. On the rotor lifting line wake model[J]. Journal of Ship Production and Design, 2017, 33(1):31-45. [7] EPPS B, CHALFANT J, KIMBALL R, et al. OpenProp:an open-source parametric design and analysis tool for propellers[C]//GCMS'09:Proceedings of the 2009 Grand Challenges in Modeling&Simulation Conference. Vista:Society for Modeling&Simulation International, 2009:104-111. [8] 刘沛清.空气螺旋桨理论及其应用[M].北京:北京航空航天大学出版社, 2006:90-92. LIU P Q. Theory and application of airscrew[M]. Beijing:Beihang University Press, 2006:90-92(in Chinese). [9] 高永卫,黄灿金,魏闯.一种涵道螺旋桨的简便设计方法[J].航空工程进展, 2013, 4(3):352-357. GAO Y W, HUANG C J, WEI C. A simple approach to the design of ducted propeller[J]. Advances in Aeronautical Science and Engineering, 2013, 4(3):352-357(in Chinese). [10] 昌泽舟.轴流式通风机实用技术[M].北京:机械工业出版社, 2005:20-31. CHANG Z Z. Practical techniques of axial fan[M]. Beijing:China Machine Press, 2005:20-31(in Chinese). [11] 宋长红,林永峰,陈文轩,等.基于动量源方法的涵道尾桨CFD分析[J].直升机技术, 2009(1):6-11. SONG C H, LIN Y F, CHEN W X, et al. CFD analysis for the ducted tail rotor based on momentum-source method[J]. Helicopter Technique, 2009(1):6-11(in Chinese). [12] 叶坤,叶正寅,屈展.涵道气动优化设计方法[J].航空动力学报, 2013, 28(8):1828-1835. YE K, YE Z Y, QU Z. Aerodynamic optimization method for duct design[J]. Journal of Aerospace Power, 2013, 28(8):1828-1835(in Chinese). [13] 姬乐强,李建波,方毅.涵道风扇气动特性及其参数优化设计[J].科学技术与工程, 2019, 19(9):245-251. JI L Q, LI J B, FANG Y. The aerodynamic characteristics and parameter optimization design of ducted fan[J]. Science Technology and Engineering, 2019, 19(9):245-251(in Chinese). [14] 杜思亮,芦志明,唐正飞.轴流状态下涵道螺旋桨增升方法的数值模拟[J].南京航空航天大学学报, 2016, 48(2):173-179. DU S L, LU Z M, TANG Z F. Numerical simulation of lift enhancement method of ducted propeller under axial flow[J]. Journal of Nanjing University of Aeronautics&Astronautics, 2016, 48(2):173-179(in Chinese). [15] 杜思亮,芦志明,唐正飞.开口壁式涵道螺旋桨气动特性数值模拟[J].南京航空航天大学学报, 2017, 49(2):173-182. DU S L, LU Z M, TANG Z F. Numerical simulation on aerodynamic characteristics of air leakage ducted propeller[J]. Journal of Nanjing University of Aeronautics&Astronautics, 2017, 49(2):173-182(in Chinese). [16] 李晓华,郭正,陈清阳.涵道螺旋桨气动特性数值模拟[J].国防科技大学学报, 2015, 37(4):31-35. LI X H, GUO Z, CHEN Q Y. Numerical simulation of ducted rotor's aerodynamic characteristics[J]. Journal of National University of Defense Technology, 2015, 37(4):31-35(in Chinese). [17] 许和勇,叶正寅.基于非结构嵌套网格的涵道螺旋桨数值模拟[J].空气动力学学报, 2013, 31(3):306-309. XU H Y, YE Z Y. Numerical simulation of ducted-propeller system using unstructured overset grids[J]. Acta Aerodynamica Sinica, 2013, 31(3):306-309(in Chinese). [18] 史文博,李杰.对转螺旋桨流场气动干扰数值模拟[J].航空动力学报, 2019, 34(4):829-837. SHI W B, LI J. Numerical simulation of contra-rotating propeller flowfield aerodynamic interactions[J]. Journal of Aerospace Power, 2019, 34(4):829-837(in Chinese). [19] 郭佳豪,周洲,范中允.一种耦合CFD修正的螺旋桨快速设计方法[J].航空学报, 2020, 41(2):123216. GUO J H, ZHOU Z, FAN Z Y. A quick design method of propeller coupled with CFD correction[J]. Acta Aeronautica et Astronautica Sinica, 2020, 41(2):123216(in Chinese). [20] GRUNWALD K J, GOODSON K W. Aerodynamic loads on an isolated shrouded-propeller configuration for angles of attack from-10° to 110°:NASA-TN-D-995[R]. Washington, D.C.:NASA, 1962. |