多目标约束的精锻叶片几何重构优化算法

doi:10.7527/S1000-6893.2018.21844

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

多目标约束的精锻叶片几何重构优化算法

冯亚洲, 任军学, 梁永收, 刘明山

西北工业大学现代设计与集成制造技术教育部重点实验室, 西安 710072

收稿日期:2017-11-06 修回日期:2018-03-19 出版日期:2018-07-15 发布日期:2018-03-19
通讯作者: 任军学 E-mail:rjx1968@nwpu.edu.cn
基金资助:
国家科技重大专项（2013ZX04011031）

Multi-objective optimization algorithm for geometric reconstruction of precision forged blade

FENG Yazhou, REN Junxue, LIANG Yongshou, LIU Mingshan

Key Laboratory of Contemporary Design and Integrated Manufacturing Technology of Ministry of Education, Northwestern Polytechnical University, Xi'an 710072, China

Received:2017-11-06 Revised:2018-03-19 Online:2018-07-15 Published:2018-03-19
Supported by:
National Science and Technology Major Project (2013ZX04011031)

摘要/Abstract

摘要： 新型航空发动机已部分采用精密锻造工艺提高叶片的制造精度和效率。然而，精锻后的叶身型面与设计模型存在几何偏差，导致依据设计模型加工后的进/排气边与精锻的叶身型面不能很好地匹配。为了解决该问题，提出一种面向精锻叶片自适应加工的几何重构方法。首先，建立基于公差约束配准的目标函数，并采用粒子群优化（PSO）算法求解目标函数。其次，提出基于叶身变形趋势预测进/排气边轮廓的光顺重构算法。最后，通过精锻叶片自适应数控加工实验对提出的方案和算法进行验证。实验结果表明，该方案可以有效重构出合格的工艺模型，满足精锻叶片的精密数控加工要求。

关键词: 精锻叶片, 进/排气边, 自适应加工, 配准定位, 几何重构, 变形趋势, 光顺

Abstract: The precision forging technology is the favored means to improve the machining accuracy and efficiency of aero-engine blade manufacturing. However, there is still a certain geometric deviation between the forged blade surface and the design model, causing the edges of the blade machined based on the design model cannot match well with the blade body. To solve this issue, a geometric reconstruction method for adaptive machining of the precision forged blade is proposed. The objective function of match is established based on the tolerance constraint, and the Particle Swarm Optimization (PSO) algorithm for solving this objective function is presented. A smoothing reconstruction algorithm is proposed to predict the profile of the edge shape based on deformation trend of the blade surface. Experiments verify effectiveness of the approach and algorithm proposed in this paper. The results show that this method can reconstruct a qualified model for high-efficiency and precision requirements of adaptive machining of the precision forged blade. This approach is finally verified with a precision forged blade by the adaptive CNC machining.

Key words: precision forged blade, leading/trailing edge, adaptive machining, match, geometric reconstruction, deformation trend, smoothness

中图分类号:

V261

冯亚洲, 任军学, 梁永收, 刘明山. 多目标约束的精锻叶片几何重构优化算法[J]. 航空学报, 2018, 39(7): 421844-421844.

FENG Yazhou, REN Junxue, LIANG Yongshou, LIU Mingshan. Multi-objective optimization algorithm for geometric reconstruction of precision forged blade[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(7): 421844-421844.

参考文献

[1] LU B, OU H, ARMSTRONG C G, et al. 3D die shape optimisation for net-shape forging of aerofoil blades[J]. Materials & Design, 2009, 30(7):2490-2500.
[2] 任军学, 冯亚洲, 米翔畅, 等. 航空发动机精锻叶片自适应数控加工技术[J]. 航空制造技术, 2015, 492(22):52-55. REN J X, FENG Y Z, MI X C, et al. Adaptive techniques in CNC machining of aeroengine precision forging blades[J]. Aeronautical Manufacturing Technology, 2015, 492(22):52-55(in Chinese).
[3] MAKEM J E, OU H, ARMSTRONG C G. A virtual inspection framework for precision manufacturing of aerofoil components[J]. Computer-Aided Design, 2012, 44(9):858-874.
[4] ZHANG D H, ZHANG Y, WU B H. Research on the adaptive machining technology of Blisk[J]. Advanced Materials Research, 2009, 69-70:446-450.
[5] GAO J, CHEN X, YILMAZ O, et al. An integrated adaptive repair solution for complex aerospace components through geometry reconstruction[J]. International Journal of Advanced Manufacturing Technology, 2008, 36(11-12):1170-1179.
[6] JAVIDRAD F, RAHMATI R. An integrated re-engineering plan for the manufacturing of aerospace components[J]. Materials & Design, 2009, 30(5):1524-1532.
[7] MOHAGHEGH K, SADEGHI M H, ABDULLAH A. Reverse engineering of turbine blades based on design intent[J]. International Journal of Advanced Manufacturing Technology, 2007, 32(9-10):1009-1020.
[8] MOHAGHEGH K, SADEGHI M H, ABDULLAH A, et al. Improvement of reverse-engineered turbine blades using construction geometry[J]. International Journal of Advanced Manufacturing Technology, 2010, 49(5-8):675-687.
[9] DONG Y, ZHANG D, BU K, et al. Geometric parameter-based optimization of the die profile for the investment casting of aerofoil-shaped turbine blades[J]. International Journal of Advanced Manufacturing Technology, 2011, 57(9-12):1245-1258.
[10] ZHAO Z, FU Y, LIU X, et al. Measurement-based geometric reconstruction for milling turbine blade using free-form deformation[J]. Measurement, 2017, 101:19-27.
[11] LI Y, NI J. Constraints based nonrigid registration for 2D blade profile reconstruction in reverse engineering[J]. Journal of Computing & Information Science in Engineering, 2009, 9(3):296-297.
[12] RONG Y, XU J, SUN Y. A surface reconstruction strategy based on deformable template for repairing damaged turbine blades[J]. Proceedings of the Institution of Mechanical Engineers Part G:Journal of Aerospace Engineering, 2014, 228(12):2358-2370.
[13] LI L, LI C, TANG Y, et al. An integrated approach of reverse engineering aided remanufacturing process for worn components[J]. Robotics and Computer Integrated Manufacturing, 2017, 48:39-50.
[14] 蔺小军, 陈悦, 王志伟, 等. 面向自适应加工的精锻叶片前后缘模型重构[J]. 航空学报, 2015, 36(5):1695-1703. LIN X J, CHEN Y, WANG Z W, et al. Model restructuring about leading edge and tailing edge of precision forging blade for adaptive machining[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(5):1695-1703(in Chinese).
[15] 张艳, 汪文虎, 解晓娜, 等. 压气机辊轧叶片前后缘圆滑转接建模方法[J]. 计算机集成制造系统, 2015, 21(2):444-448. ZHANG Y, WANG W H, XIE X N, et al. Smooth connection modeling method between edge and body of compressor roll-forming blade[J]. Computer Integrated Manufacturing Systems, 2015, 21(2):444-448(in Chinese).
[16] 程云勇, 王嫔, 刘鹏军, 等. 基于误差控制的薄壁叶片椭圆弧形前后缘建模方法[J]. 计算机辅助设计与图形学学报, 2016, 28(1):155-161. CHENG Y Y, WANG P, LIU P J, et al. An error control based modeling method for ellipse leading edge and trailing edge reconstruction of thin-walled blade[J]. Journal of Computer-Aided Design & Computer Graphics, 2016, 28(1):155-161(in Chinese).
[17] 侯斐茹, 万能, 常智勇, 等. 轮廓度约束下近净成形叶片余量优化方法[J]. 航空学报, 2017, 38(7):299-308. HOU F R, WAN N, CHANG Z Y, et al. An allowance optimization method for near-net shape blade under profile tolerance constraints[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(7):299-308(in Chinese).
[18] ZHANG Y, CHEN Z T, NING T. Reverse modeling strategy of aero-engine blade based on design intent[J]. International Journal of Advanced Manufacturing Technology, 2015, 81(9-12):1781-1796.
[19] XU G, WANG G Z, CHEN W Y. Geometric construction of energy-minimizing Bézier curves[J]. Science China Information Sciences, 2011, 54(7):1395-1406.
[20] 施法中. 计算机辅助几何设计与非均匀有理B样条[M]. 北京:高等教育出版社, 2001. SHI F Z. Computer aided geometric design and non-uniform rational B-spline[M]. Beijing:Higher Education Press, 2001(in Chinese).
[21] PIEGL L, TILLER W. The NURBS book[M]. 2nd ed. New York:Springer-Verlag, 1997.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

多目标约束的精锻叶片几何重构优化算法

Multi-objective optimization algorithm for geometric reconstruction of precision forged blade

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	冯亚洲, 任军学, 刘战锋, 韩晓兰. 复杂薄壁构件自适应加工工艺几何模型重构[J]. 航空学报, 2021, 42(10): 524820-524820.
[2]	侯斐茹, 万能, 常智勇, 陈泽忠. 轮廓度约束下近净成形叶片余量优化方法[J]. 航空学报, 2017, 38(7): 421069-421069.
[3]	蔺小军, 陈悦, 王志伟, 郭研, 高源, 张新鸽. 面向自适应加工的精锻叶片前后缘模型重构[J]. 航空学报, 2015, 36(5): 1695-1703.
[4]	张勇;张仲寅. 气动外形光顺及其对气动力数值模拟效果的影响[J]. 航空学报, 1993, 14(4): 197-199.
[5]	孙家昶;黄无忌;李心灿. 截面为多段圆弧的机身外形的凸性分析[J]. 航空学报, 1978, 00(2): 56-64.