预循环应力对材料断裂力学性能“锻炼”效应的影响

doi:10.7527/S1000-6893.2015.0340

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

预循环应力对材料断裂力学性能“锻炼”效应的影响

张啸尘^1,2, 谢里阳^1,2, 张瑞金^1,2, 孟维迎^1,2, 李铭^1,2, 胡杰鑫^1,2

1. 东北大学机械工程与自动化学院现代设计与分析研究所, 沈阳 110819;
2. 东北大学航空动力学装备振动及控制教育部重点实验室, 沈阳 110819

收稿日期:2015-09-24 修回日期:2015-11-16 出版日期:2016-10-15 发布日期:2015-12-28
通讯作者: 谢里阳,Tel.:024-83673915 E-mail:lyxie@mail.neu.edu.cn E-mail:lyxie@mail.neu.edu.cn
作者简介:张啸尘男,博士。主要研究方向:机械疲劳强度与材料断裂力学性能。Tel.:024-83678622 E-mail:zxc_neu@163.com;谢里阳男,博士,教授,博士生导师。主要研究方向:机械疲劳强度与可靠性。Tel.:024-83673915 E-mail:lyxie@mail.neu.edu.cn
基金资助:
国家自然科学基金（51335003）；辽宁重大装备制造协同创新中心资助

‘Coaxing effect’of prior cycling stress on material fracture mechanics performance

ZHANG Xiaochen^1,2, XIE Liyang^1,2, ZHANG Ruijin^1,2, MENG Weiying^1,2, LI Ming^1,2, HU Jiexin^1,2

1. Institute of Modern Design and Analysis, School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110819, China;
2. Key Laboratory of Vibration and Control of Aero-propulsion Systems, Northeastern University, Shenyang 110819, China

Received:2015-09-24 Revised:2015-11-16 Online:2016-10-15 Published:2015-12-28
Supported by:
National Natural Science Foundation of China (51335003); Supported by the collaborative Innovation Center of Major Machine Manufacturing in Liaoning

摘要/Abstract

摘要：

对服役多年的高速列车用7N01铝合金材料进行疲劳裂纹扩展速率试验，其对数坐标系中的疲劳裂纹扩展速率da/dN与应力强度因子ΔK的关系呈折线形式。与未服役材料对比，在裂纹扩展初期阶段，裂纹扩展速率降低。选取两种原始铝合金材料进行10⁷次预循环应力作用后的疲劳裂纹扩展速率试验，研究低于疲劳极限的预循环应力对材料断裂力学性能的影响。结果表明：经预循环应力作用的材料，其da/dN与ΔK的关系曲线在裂纹扩展初期（对应于低应力强度因子阶段）均出现折转现象。对试验数据的回归分析表明：预循环应力的作用使得材料的断裂力学性能有所提高，预循环应力对材料产生“锻炼”效应。

关键词: 疲劳裂纹扩展速率, 预循环应力, 服役材料, 断裂力学性能, "锻炼"效应

Abstract:

The fatigue crack growth rate tests were carried out using aluminum alloy materials served in high-speed train for years, and the relationship of fatigue crack growth rate da/dN and the stress intensity factor ΔK was shown in a broken form in logarithmic coordinates. Compared with the non-service material, the crack growth rate decreases at the initial stage. Aiming at this phenomenon, the aluminum alloy materials were applied here to investigate the behavior of fatigue crack growth under 10⁷ prior cycling stress. The influence of prior cycling stress under fatigue limit on the material fracture mechanics performance was studied in details. The results show that the curves of da/dN vs ΔK of prior cycling stress materials present a broken form in the low ΔK period. The regression analyses of the test data illustrate that the prior cycling stress plays a positive role in the fracture performance, and the prior cycling stress has‘coaxing effect’on the fatigue crack of materials.

Key words: fatigue crack growth rate, prior cycling stress, service materials, fracture mechanical properties, ‘coaxing effect’

中图分类号:

V252

张啸尘, 谢里阳, 张瑞金, 孟维迎, 李铭, 胡杰鑫. 预循环应力对材料断裂力学性能“锻炼”效应的影响[J]. 航空学报, 2016, 37(10): 3074-3082.

ZHANG Xiaochen, XIE Liyang, ZHANG Ruijin, MENG Weiying, LI Ming, HU Jiexin. ‘Coaxing effect’of prior cycling stress on material fracture mechanics performance[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(10): 3074-3082.

参考文献

[1] 赵荣国, 罗希延, 任璐璐. 航空发动机涡轮盘用GH4133B合金疲劳裂纹扩展行为研究[J]. 机械工程学报, 2011, 47(18):55-65. ZHAO R G, LUO X Y, REN L L. Research on fatigue crack propagation behavior of GH4133B superalloy used in turbine disk of aero-engine[J]. Journal of Mechanical Engineering, 2011, 47(18):55-65(in Chinese).
[2] VASUDEVAN A K, SADANANDA K. Fatigue crack growth behavior of composites[J]. Metallurgical and Materials Transactions A, 1995, 26(12):3199-3210.
[3] SADANANDA K, VASUDEVAN A K. Short crack growth and internal stresses[J]. International Journal of Fatigue, 1997, 19(93):99-108.
[4] WELLS A A. Applications of fracture mechanics at and beyond general yielding[J]. British Welding Journal, 1963, 10:563-570.
[5] 赵少汴.损伤容限设计方法和设计数据[J].机械设计,2000,17(5):4-7. ZHAO S B. Design methods and design data for damage tolerance[J]. Mechanical Design, 2000, 17(5):4-7(in Chinese).
[6] IRWIN G R. Analysis of stress and strains near the end of a crack traversing a plate[J]. Journal of Applied Mechanics, 1957, 24:361-364.
[7] 穆志韬, 陈定海, 朱做涛, 等.腐蚀条件下LD2航空铝合金裂纹扩展规律研究[J]. 航空学报, 2013, 34(3):574-579. MU Z T, CHEN D H, ZHU Z T, et al. Fatigue crack growth behavior of aerospace aluminum alloy LD2 under corrosion[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(3):574-579(in Chinese).
[8] 李旭东, 穆志韬, 贾明明. 加载频率对航空铝合金腐蚀疲劳裂纹扩展速率的影响[J]. 机械工程材料, 2014, 38(7):50-52. LI X D, MU Z T, JIA M M. Effect of loading frequency on corrosion fatigue crack growth rate of aerospace aluminum alloy[J]. Materials for Mechanical Engineering, 2014, 38(7):50-52(in Chinese).
[9] MANN T. The influence of mean stress on fatigue crack propagation in aluminium alloys[J]. Internatinal Journal of Fatigue, 2007, 29(8):1393-1401.
[10] OKAYASU M, SAKAI K, TAKASU S. Material properties of long term naturally aged die cast Al-Si-Cu alloys[J]. International Journal of Cast Metals Research, 2011, 24(5):286-298.
[11] 储军, 郑松林, 冯金芝. 基于低幅锻炼载荷的累积强化效果模型[J]. 机械工程学报, 2011, 47(16):30-34. CHU J, ZHENG S L, FENG J Z. Cumulative strengthening effect model based on the low-amplitude training load[J]. Journal of Mechanical Engineering, 2011, 47(16):30-34(in Chinese).
[12] GOUGH H J. The fatigue of metals[M]. London:Scott, Greenwood and Son, 1924.
[13] NISITANI H, TOKAO K I. Significance of initiation, propagation and closure of microcracks in high cyclic fatigue of ductile metals[J]. Engineering Fracture Mechanics, 1981, 15(3-4):445-456.
[14] ISHIHARA S, MCEVILY A J. Coaxing effect in the small fatigue crack growth regime[J]. Scripta Materialia, 1999, 40(5):617-622.
[15] 吴志学, 吕文阁, 徐灏. 疲劳极限下损伤及"锻炼"效应[J]. 东北大学学报, 1996, 17(3):338-341. WU Z X, LV W G, XU H. Fatigue damage below the fatigue limit and the "coaxing effects"[J]. Journal of Northeastern University, 1996, 17(3):338-341(in Chinese).
[16] 郑松林. 低幅载荷对汽车前轴疲劳寿命影响的试验研究[J]. 机械强度, 2002, 24(4):547-549. ZHENG S L. Studying the effect of low amplitude loading on fatigue life of truck front axle[J]. Journal of Mechanical Strength, 2002, 24(4):547-549(in Chinese).
[17] ZHANG X C, XIE L Y, LIU J Z, et al. Statistical analysis methods of fatigue crack growth rate[J]. Transactions of Tianjin University, 2014, 20(5):322-327.
[18] 郑松林, 卢曦, 马晓婷. 汽车结构件低载强化后的疲劳断口特性[J]. 机械工程材料, 2006, 30(6):17-19. ZHENG S L, LU X, MA X T. Fracture characteristic of automobile structure strengthening under low amplitude load[J]. Materials for Mechanical Engineering, 2006, 30(6):17-19(in Chinese).
[19] 赵礼辉, 郑松林, 冯金芝. 基于低载强化特性的疲劳寿命估计方法[J]. 机械工程学报, 2013, 49(8):115-122. ZHAO L H, ZHENG S L, FENG J Z. Fatigue life prediction based on simplified low-amplitude-load strengthening model[J]. Journal of Mechanical Engineering, 2013, 49(8):115-122(in Chinese).
[20] KUNZ L, LUKAS P, KONECNA R. Initiation and propagation of fatigue cracks in cast in 713LC superalloy[J]. Engineering Fracture Mechanics, 2010, 77(11):2008-2015.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

预循环应力对材料断裂力学性能“锻炼”效应的影响

‘Coaxing effect’of prior cycling stress on material fracture mechanics performance

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	田秀云;孙智强. 2024-T42铝合金疲劳裂纹扩展曲线的拟合方法研究[J]. 航空学报, 2003, 24(2): 144-146.
[2]	王永廉. 利用疲劳裂纹扩展速率估算断裂韧性[J]. 航空学报, 1997, 18(6): 728-731.
[3]	谢济洲. 涡轮盘用IN718合金的高温低周疲劳及其裂纹扩展特性[J]. 航空学报, 1993, 14(2): 79-85.
[4]	王俊扬. 起落架结构损伤容限设计初步探讨[J]. 航空学报, 1979, 00(2): 46-59.