基于电解扫掠成形原理的整体叶盘叶根加工方法

doi:10.7527/S1000-6893.2015.0191

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于电解扫掠成形原理的整体叶盘叶根加工方法

王福元¹, 赵建社²

1. 盐城工学院机械工程学院, 盐城 224051;
2. 南京航空航天大学机电学院, 南京 210016

收稿日期:2015-05-26 修回日期:2015-06-25 出版日期:2015-10-15 发布日期:2015-07-07
通讯作者: 王福元, Tel.: 0515-88298571 E-mail: wfyycit@163.com E-mail:wfyycit@163.com
作者简介:王福元男, 博士, 教授。主要研究方向: CAD/CAM、特种加工技术。 Tel: 0515-88298571 E-mail: wfyycit@163.com;赵建社男, 博士, 副教授。主要研究方向: 特种加工新技术、整体构件组合电加工技术。 Tel: 025-84891526 E-mail: zhaojs@nuaa.edu.cn
基金资助:
国家自然科学基金 (51405418); 陕西省特种加工重点实验室开放基金 (ZSKJ201410); 航空科学基金 (2011ZE52055)

Processing method of blade root of blisk based on principle of electrochemical sweep shaping

WANG Fuyuan¹, ZHAO Jianshe²

1. School of Mechanical Engineering, Yancheng Institute of Technology, Yancheng 224051, China;
2. College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2015-05-26 Revised:2015-06-25 Online:2015-10-15 Published:2015-07-07
Supported by:
National Natural Science Foundation of China (51405418); Open Foundation of Non-traditional Machining Key Laboratory of Shaanxi Province; Aeronautical Science Foundation of China (2011ZE52055)

摘要/Abstract

摘要：

采用片状或管状阴极电解加工(ECM)后的整体叶盘由于加工运动、阴极形状等原因在叶根处会形成一定的加工残留,影响整体叶盘的加工精度。针对叶片电解加工后形成的叶根残留,开展去除叶根残留电解加工方法的研究,解决叶根电解加工的阴极结构、加工路径设计等难题。首先,分析了叶根的残留分布情况以及叶间通道的结构,采用了电解扫掠成形加工方案。其次,设计了阴极结构与加工路径,在阴极结构上采用了扇形流道并分析了电解液流速分布,通过增加引流槽、改变倾角等措施改善了流场;对阴极的运动路径进行了规划,利用专用仿真软件对阴极运动干涉与加工程序进行了检验;通过附加叶盘转动补偿了由于不同截面内叶间通道宽度与阴极刃口尺寸不一致给加工带来的不足。最后,制作了电解加工装置并通过试验对叶根电解加工方法进行了验证。试验结果表明,该加工方法有效去除了叶根残留,加工表面质量好,加工精度达到了要求。

关键词: 整体叶盘, 电解加工, 扫掠成形, 路径优化, 阴极设计, 流场分析

Abstract:

The machining residual will be formed at the blade root after the blisk is processed by the electrochemical machining (ECM) method by the sheet or tubular cathode because of the influences of the movement and shape of the cathode, and it will reduce the machining precision of the blisk. In order to remove the residual at the root of the blade after electrochemical machining, the electrochemical machining scheme on blade root is carried out. Firstly, the machining scheme is determined according to the residual distribution and the structure of the channel. Secondly, the cathode structure is developed and the processing paths are calculated. The sector structure is adopted in the flow path and the flow velocity distribution is analyzed; therefore, the flow field of the cathode is improved by adding the drainage, changing the angle and other measures. The processing paths are optimized and the motion interference and the NC program are verified by the special-purpose simulation software. The lack resulting from the difference between the width of the channel and the width of the front edge of the cathode is compensated by the increase of additional rotation of the blisk. Finally, the ECM unit is made and the electrochemical machining tests about the root are carried out and verify the method. The result proves that the residual is effectively removed at the blade root and the surface quality and the processing accuracy meets the requirements.

Key words: integral impeller, electrochemical machining, sweep shaping, path optimization, cathode design, flow field analysis

中图分类号:

V261.5
TG662

王福元, 赵建社. 基于电解扫掠成形原理的整体叶盘叶根加工方法[J]. 航空学报, 2015, 36(10): 3457-3464.

WANG Fuyuan, ZHAO Jianshe. Processing method of blade root of blisk based on principle of electrochemical sweep shaping[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(10): 3457-3464.

参考文献

[1] Ren J X, Zhang D H, Wang Z Q, et al. Research on the NC machining technique of blisk[J]. Acta Aeronautica et Astronautica Sinica, 2004, 25(2): 205-208 (in Chinese). 任军学, 张定华, 王增强, 等. 整体叶盘数控加工技术研究[J]. 航空学报, 2004, 25(2): 205-208.
[2] Luo M, Wu B H, Li S, et al. Five-axis tool orientation optimization based on kinematical method[J]. Journal of Mechanical Engineering, 2009, 45(9): 159-163 (in Chinese). 罗明, 吴宝海, 李山, 等. 自由曲面五轴加工刀轴矢量的运动学优化方法[J]. 机械工程学报, 2009, 45(9): 159-163.
[3] Li X Y, Ren J X, Liang Y S, et al. Tool axis planning for five-axis machining of complex channel parts[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(9): 2641-2651 (in Chinese). 李祥宇, 任军学, 梁永收, 等. 复杂通道类零件五轴加工刀轴规划[J]. 航空学报, 2014, 35(9): 2641-2651.
[4] Dong L, Cao L X. Approximation method of tunnel surfaces with general cylindrical surfaces and its application in plunge milling of impellers[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(8): 2331-2340 (in Chinese). 董雷, 曹利新. 通道曲面的柱面逼近方法及其在叶轮插铣中的应用[J]. 航空学报, 2014, 35(8): 2331-2340.
[5] Shi W, Ning T, Chen Z T. Tool position feasible area of torus tool in machining blade root transitional surfaces[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(12): 3470-3479 (in Chinese). 石巍, 宁涛, 陈志同. 环面工具加工叶根过渡曲面的刀位可行域[J]. 航空学报, 2014, 35(12): 3470-3479.
[6] Song M X, Zhao X H, Guo W, et al. Developments and present situation of diffusion bonding of titanium alloy to other metals[J]. Welding & Joining, 2005(1): 5-7 (in Chinese). 宋敏霞, 赵熹华, 郭伟, 等. 钛合金与其它金属材料扩散连接研究现状与发展[J]. 焊接, 2005(1): 5-7.
[7] Zhong Y, Hu C. Welding line structure design and test of linear friction welding blisk[J]. Gas Turbine Experiment and Research, 2012, 25(S0): 44-47 (in Chinese). 钟燕, 胡超. 线性摩擦焊整体叶盘焊缝结构设计及试验[J]. 燃气涡轮试验与研究, 2012, 25(增刊): 44-47.
[8] Zhang M Q, Fu J Y. Application analysis of precise vibrating electrochemical machining in high-temperature alloy disk[J]. Aeronautical Manufacturing Technology, 2009(22): 27-29 (in Chinese). 张明岐, 傅军英. 高温合金整体叶盘精密振动电解加工方法的应用分析[J]. 航空制造技术, 2009(22): 27-29.
[9] Liu J, Xu Z Y, Wan L K, et al. Design and experiment of electrolyte flow mode in electrochemical machining of blisk[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(1): 259-267 (in Chinese). 刘嘉, 徐正扬, 万龙凯, 等. 整体叶盘叶型电解加工流场设计及实验[J]. 航空学报, 2014, 35(1): 259-267.
[10] Shan D B, Liu F, Xu W C, et al. Experimental study on process of precision forging of an aluminum-alloy rotor[J]. Journal of Materials Processing Technology, 2005, 170(1-2): 412-415.
[11] Wilk W, Tota J. Modern technology of the turbine blades removal machining[C]//8th International Conference on Advanced Manufacturing Operations, 2007: 347-355.
[12] Bußmann M,Bayer E. Blisk production of the future technological and logistical aspects of future-oriented construction and manufacturing processes of integrally bladed rotors[C]//19th International Symposium on Air Breathing Engines. Reston: American Institute of Aeronautics and Astronautics, 2009: 1169-1177.
[13] Jiang H F. Development and manufacturing technology of combustion turbine engine[J]. Aeronautical Manufacturing Technology, 2007(5): 36-39 (in Chinese). 江和甫. 燃气涡轮发动机的发展与制造技术[J]. 航空制造技术, 2007(5): 36-39.
[14] Huang W, Huang C F, Wang Y M. Key manufacturing technology research of advanced aero-engine[J]. Aeronautical Manufacturing Technology, 2009(3): 42-48 (in Chinese). 黄维, 黄春峰, 王永明. 先进航空发动机关键制造技术研究[J]. 航空制造技术, 2009(3): 42-48.
[15] Xu J W, Yun N Z, Tang Y X, et al. The modeling of NC-electrochemical contour evolution machining using a rotary tool-cathode[J]. Journal of Materials Processing Technology, 2005, 159(2): 272-277.
[16] Zhu Y W, Xu J W. Shaping law and process study on combined wobbling feeds for electrochemical contour evolution machining integral component parts[J]. Journal of Mechanical Engineering, 2008, 44(12): 280-286 (in Chinese). 朱永伟, 徐家文. 复合平面摆动展成电解加工整体构件异形面的成形分析及应用[J]. 机械工程学报, 2008, 44(12): 280-286.
[17] Wu J M. Research on the large diameter integral impeller with numerical control electrochemical machining[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008 (in Chinese). 吴建民. 大直径整体叶轮数控电解加工技术研究[D]. 南京: 南京航空航天大学, 2008.
[18] Wang F Y, Xu J W, Zhao J S. Process and test of electrochemical machining of large diameter integral impeller by fractional step machining method[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(12): 2450-2456 (in Chinese). 王福元, 徐家文, 赵建社. 大直径整体叶轮分步法电解加工工艺与试验[J]. 航空学报, 2010, 31(12): 2450-2456.
[19] Xu Q, Zhu D, Xu Z Y, et al. Optimization of cathode multidimensional movement path in electrochemical machining of blisk channels[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(5): 1548-1554 (in Chinese). 徐庆, 朱荻, 徐正杨, 等. 整体叶盘通道电解加工电极多维运动轨迹优化[J]. 航空学报, 2011, 32(5): 1548-1554.
[20] Zhao J S, Wang F Y, Xu J W, et al. Research on electrochemical machining process for fine finishing of integral impeller with free-form surface[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(12): 2841-2848 (in Chinese). 赵建社, 王福元, 徐家文, 等. 整体叶轮自由曲面叶片精密电解加工工艺研究[J]. 航空学报, 2013, 34(12): 2841-2848.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于电解扫掠成形原理的整体叶盘叶根加工方法

Processing method of blade root of blisk based on principle of electrochemical sweep shaping

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	齐龙舟, 赵鲲, 冯和英, 张俊龙, 覃晨. 不同冲击距离下斜板开槽对超声速射流冲击噪声的影响[J]. 航空学报, 2022, 43(8): 125712-125712.
[2]	王国乾, 李寒松, 韩国峰, 李若琪, 张彦. 基于周期性换向冲液的掩膜电解加工技术[J]. 航空学报, 2022, 43(4): 525575-525575.
[3]	赵静波, 徐正扬, 刘强. 扩压器扭曲型面电解加工阴极进给方向优化及试验[J]. 航空学报, 2022, 43(4): 525570-525570.
[4]	马世赫, 李志超, 刘桂贤, 张永俊, 王瑞祥. 脉冲气体辅助掩模电解加工技术[J]. 航空学报, 2022, 43(4): 525646-525646.
[5]	朱荻, 刘嘉, 王登勇, 房晓龙, 刘言. 脉动态电解加工[J]. 航空学报, 2022, 43(4): 525959-525959.
[6]	张聚臣, 李世成, 刘洋, 李兴林. 基于Realizable k-ε模型的叶盘通道电解加工多场耦合分析[J]. 航空学报, 2022, 43(4): 525670-525670.
[7]	杜楠楠, 陈建, 马奔, 王术波, 张自超. 多太阳能无人机覆盖路径优化方法[J]. 航空学报, 2021, 42(6): 324476-324476.
[8]	徐超, 胡皓, 彭小强, 李信磊, 林之凡. 复杂曲面铝反射镜磁流变抛光工艺优化[J]. 航空学报, 2021, 42(10): 524914-524914.
[9]	王志伟, 蔺小军, 史耀耀, 高源, 张允. 基于压缩量偏差约束的整体叶盘砂布轮数控抛光路径规划[J]. 航空学报, 2020, 41(2): 623330-623330.
[10]	高航, 袁业民, 陈建锋, 王宣平. 航空发动机整体叶盘磨料水射流开坯加工技术研究进展[J]. 航空学报, 2020, 41(2): 623319-623319.
[11]	付军泉, 史志伟, 周梦贝, 吴大卫, 潘立军. 一种翼身融合飞行器的失速特性研究[J]. 航空学报, 2020, 41(1): 123176-123176.
[12]	陈密, 房晓龙, 朱荻. 脉冲电流大厚度电解线切割加工试验[J]. 航空学报, 2019, 40(8): 422781-422781.
[13]	黄云, 肖贵坚, 邹莱. 整体叶盘抛光技术的研究现状及发展趋势[J]. 航空学报, 2016, 37(7): 2045-2064.
[14]	肖贵坚, 黄云, 伊浩. 面向型面精度一致性的整体叶盘砂带磨削新方法及实验研究[J]. 航空学报, 2016, 37(5): 1666-1676.
[15]	明平美, 包晓慧, 郝巧玲, 王俊涛. 电铸-电解组合法加工双向喇叭孔阵列[J]. 航空学报, 2014, 35(7): 2049-2062.