优化镍基高温合金X-750热处理工艺参数的非线性超声无损评估方法

doi:10.7527/S1000-6893.2015.0023

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

优化镍基高温合金X-750热处理工艺参数的非线性超声无损评估方法

李卫彬, 秦晓旭

厦门大学航空系, 厦门 361005

收稿日期:2014-10-30 修回日期:2015-01-15 出版日期:2015-11-15 发布日期:2015-01-29
通讯作者: 李卫彬,Tel.:0592-2180699,E-mail:liweibin@xmu.edu.cn E-mail:liweibin@xmu.edu.cn
作者简介:李卫彬,男,博士,助理教授,硕士生导师。主要研究方向:超声无损检测、结构健康监测。Tel:0592-2180699,E-mail:liweibin@xmu.edu.cn;秦晓旭,女,硕士研究生。主要研究方向:超声检测。E-mail:shinki2010@163.com
基金资助:
国家自然科学基金(51405405);中央高校基本科研业务费专项资金(20720140511)

Optimization of heat treatment process parameter for nickel-base superalloy X-750 by nonlinear ultrasonic nondestructive evaluation method

LI Weibin, QIN Xiaoxu

Department of Aeronautics, Xiamen University, Xiamen 361005, China

Received:2014-10-30 Revised:2015-01-15 Online:2015-11-15 Published:2015-01-29
Supported by:
National Natural Science Foundation of China (51405405);Fundamental Research Funds for the Central Universities (20720140511)

摘要/Abstract

摘要：

为了获得更好的材料性能,需要对热处理工艺参数进行精确地优化。非线性超声无损检测技术是一种可以有效表征材料微观结构状态变化的评估方法,可以用来评估、优化热处理工艺参数。利用非线性超声波对热处理后的X-750合金材料进行评估,根据超声传播的非线性响应不同,对材料的性能变化做出判断,并与线性超声检测技术的评估结果进行了对比研究。研究发现经过热处理之后,材料性能显著提高,在其中传播的超声非线性响应则明显下降。材料经过热处理后性能提升越大,其声学非线性响应就会变得越小。根据超声波传播的非线性响应定性评估了3种不同的热处理工艺,明确了最优的镍基高温合金X-750退火工艺参数。研究证实了非线性超声方法的敏感度优于传统的线性超声评估方法,可以对材料的热处理效果进行无损评估,从而对热处理工艺参数进行优化与完善。

关键词: X-750合金, 热处理, 参数优化, 非线性超声, 材料性能

Abstract:

It is necessary to optimize heat treatment process parameter to achieve better material properties of metallic materials.Nonlinear ultrasonic nondestructive evaluation technology is an effective approach to characterize the material's microstructural change, which can be used to evaluate and optimize heat treatment process by nonlinear ultrasonic waves. Nonlinear ultrasonic method is used to evaluate the heat treated X-750 alloy material.Material properties of specimens after heat treatments are evaluated and predicted by the acoustic nonlinear responses of ultrasonic wave propagation. Conventional linear ultrasonic approaches are also used to make comparisons. It is found that the material properties are significantly improved after heat treatment, and better material properties correspond to less nonlinear response of ultrasound propagation.The qualitative evaluation of three different heat treatment processes for X-750 alloy is provided by ultrasonic nonlinear response in the specimens and shows the optimal heat treatment process for this materials.It can be concluded that the nonlinear acoustic technique can be used to evaluate the heat treatment condition nondestructively and to optimize the process with the improved sensitivity compared with conventional linear ultrasonic approach.

Key words: X-750 alloy, heat treatment, parameter optimization, nonlinear ultrasonics, material properties

中图分类号:

V250.2

李卫彬, 秦晓旭. 优化镍基高温合金X-750热处理工艺参数的非线性超声无损评估方法[J]. 航空学报, 2015, 36(11): 3742-3750.

LI Weibin, QIN Xiaoxu. Optimization of heat treatment process parameter for nickel-base superalloy X-750 by nonlinear ultrasonic nondestructive evaluation method[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(11): 3742-3750.

参考文献

[1] Floreen S, Nelson J L. The effect of heat treatment and composition on the stress corrosion cracking resistance of Inconel alloy X-750[J]. Metallurgical Transaction, 1983, 14(1):133-139.
[2] Ferreno D, Gorrochategui I, Sanchez L. Optimization of heat treatment for improvement of IGSCC properties of an X-750 alloy[J]. Engineering Failure Analysis, 2004, 11(3):799-810.
[3] Wang Q, Yuan S F.Amplifying signal and imaging damage method for active Lamb wave structure health monitoring[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4):1062-1067(in Chinese).王强,袁慎芳.主动Lamb波结构健康监测中信号增强与损伤成像方法[J].航空学报, 2008, 29(4):1062-1067.
[4] Achenbach J D. Wave propagation in elastic solids[M].New York:Elsevier Press, 1975:119-124.
[5] Sun X S, Xiao Y C. Opportunities and challenges of aircraft structural health monitoring[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(12):3199-3212(in Chinese).孙侠生,肖迎春.飞机结构健康监测技术的机遇与挑战[J].航空学报, 2014, 35(12):3199-3212.
[6] Li W B, Cho Y H, Achenbach J D. Detection of thermal fatigue in composites by second harmonic Lamb waves[J]. Smart Materials and Structures, 2012, 21(8):085019.
[7] Jhang K Y.Application of nonlinear ultrasonic to NDT of material degradation[J]. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2000, 47(3):540-548.
[8] Li W B, Cho Y H. Thermal fatigue damage assessment in an isotropic pipe using nonlinear guided waves[J]. Experimental Mechanics, 2014, 54(8):1309-1318.
[9] Metya A, Ghosh G, Prida N, et al.Higher harmonic analysis of ultrasonic signal for ageing behavior study of C-250 grade maraging steel[J]. NDT & E International, 2008, 41(6):484-489.
[10] Hermann J, Kim J Y, Jacobs L, et al.Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves[J]. Journal of Applied Physics, 2006, 99(12):124913.
[11] Korobov A I, Ekonomov A N E. The effect of heat treatment and static deformations on the acoustic nonlinearity of copper wires[J].Acoustical Physics, 2002, 48(5):564-571.
[12] Nagy P B. Fatigue damage assessment by nonlinear ultrasonic material characterization[J].Ultrasonics, 1998, 36(1-5):375-381.
[13] Cantrell J H, Yost W T. Nonlinear ultrasonic characterization of fatigue microstructures[J]. International Journal of Fatigue, 2001, 23(1):487-490.
[14] Shui G S, Wang Y S, Qu J M.Advances in nondestructive test and evaluation of material degradation using nonlinear ultrasound[J]. Advances in Mechanics, 2005, 35(1):52-68(in Chinese).税国双,汪越胜,曲建民.材料力学性能退化的超声无损检测与评价[J].力学进展, 2005, 35(1):52-68.
[15] Li W B, Cho Y H, Hyun S. Characterization of ultrasonic nonlinearity by thermal fatigue[J]. International Journal of Precision Engineering and Manufacturing, 2012, 13(6):935-940.
[16] Zhou Z G, Liu S M. Nonlinear ultrasonic technique using in nondestructive testing:A review[J]. Journal of Mechanical Engineering, 2011, 47(8):1-11(in Chinese).周正干,刘斯明.非线性无损检测技术的研究、应用和发展[J].机械工程学报, 2011, 47(8):1-11.
[17] Jiao J P, Drinkwater B W, Neild S A, et al. Low-frequency vibration modulation of guided waves to image nonlinear scatters for structural health monitoring[J]. Smart Material and Structure, 2009, 18(6):1-8.
[18] Gao G L, Li D Y, Dong J W, et al. Nonlinear acoustic characteristics of fatigue cracks in aluminum alloy sheet[J]. Journal of Mechanical Engineering, 2010, 46(18):71-76(in Chinese).高桂丽,李大勇,董静薇,等.铝合金薄板疲劳裂纹的非线性声学特性[J].机械工程学报, 2010, 46(18):71-76.
[19] Hu H F, Hu N Q, Qin G J. Coupling analysis of nonlinear vibro-acoustic modulation signals[J]. Journal of Mechanical Engineering, 2010, 46(23):68-76(in Chinese).胡海峰,胡茑庆,秦国军.非线性振动声调制信号耦合特征分析[J].机械工程学报, 2010, 46(23):68-76.
[20] Müller M F, Kim J Y, Qu J, et al.Characteristics of second harmonic generation of Lamb waves in nonlinear elastic plates[J].The Journal of the Acoustical Society of American, 2010, 127(4):2141-2152.
[21] Ogi H, Hirao M, Aoki S. Noncontact monitoring of surface-wave nonlinearity for predicting the remaining life of fatigue steels[J]. Journal of Applied Physics, 2001, 90(1):438-442.
[22] Yan D, Drimkwater B W, Neild S A. Measurement of the ultrasonic nonlinearity of kissing bonds in adhensivejoints[J].NDT & E International, 2009, 42(5):459-466.
[23] Zinck A A, Krishnaswamy S. Ultrasonic nonlinearity measurements on rolled polycrystalline copper[J].AIP Conference Proceedings, 2010, 1211(1):1404-1409.
[24] Jiang W H, Cao W W.Nonlinear properties of lead zirconate-titanate piezoceramics[J]. Journal of Applied Physics, 2000, 88(11):6684-6689.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

优化镍基高温合金X-750热处理工艺参数的非线性超声无损评估方法

Optimization of heat treatment process parameter for nickel-base superalloy X-750 by nonlinear ultrasonic nondestructive evaluation method

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	曹毅, 孟刚, 居勇健, 徐伟胜. 考虑伴生转动的大行程柔性微定位平台[J]. 航空学报, 2022, 43(7): 425498-425498.
[2]	王斌, 王海涛, 王玉峰, 张文武. 热障涂层水助激光扫描加工试验[J]. 航空学报, 2022, 43(4): 525353-525353.
[3]	吴宝海, 张阳, 郑志阳, 张莹, 张思琪. 数控加工进给速度参数优化研究现状与展望[J]. 航空学报, 2022, 43(4): 525467-525467.
[4]	郭磊, 高远, 辛会. 热障涂层的激光表面改性参数优化和结构设计[J]. 航空学报, 2021, 42(7): 424114-424114.
[5]	徐勇, 尹阔, 夏亮亮, 门向南, 曾一畔, 张士宏. 面向航空铝合金薄壁深腔构件的冲击液压成形工艺优化[J]. 航空学报, 2021, 42(10): 524831-524831.
[6]	吴爱国, 巩志浩. 基于改进鸽群算法的气动捕获轨道优化[J]. 航空学报, 2020, 41(9): 324292-324292.
[7]	陈联国, 王文盛, 朱知寿, 赵勇, 黄建云, 张海, 彭富华. 大规格损伤容限钛合金TC4-DT的研制及应用[J]. 航空学报, 2020, 41(6): 523454-523454.
[8]	刘一鸣, 盛文, 胡冰, 张磊. 相控阵雷达长时跟踪波束调度与波形优化策略[J]. 航空学报, 2020, 41(3): 323519-323519.
[9]	楚中毅, 赖咪, 燕少博. 欠驱动指爪机构的被动弹性元件参数优化设计[J]. 航空学报, 2018, 39(1): 421370-421370.
[10]	刘凯, 曹毅, 周睿, 葛姝翌, 丁锐. 二自由度平板折展柔性铰链的分析及优化[J]. 航空学报, 2017, 38(2): 420317-420326.
[11]	张健, 张德虎. 高空长航时太阳能无人机总体设计要点分析[J]. 航空学报, 2016, 37(S1): 1-7.
[12]	沈裕峰, 李勇, 王鑫, 还大军. 湿热环境下K-cor夹层复合材料的力学性能[J]. 航空学报, 2016, 37(7): 2303-2311.
[13]	淮文博, 唐虹, 史耀耀, 蔺小军. 砂布轮柔性抛光力的建模与参数优化[J]. 航空学报, 2016, 37(11): 3535-3545.
[14]	夏峰, 刘战强, 宋清华. 约束阻尼型减振镗杆[J]. 航空学报, 2014, 35(9): 2652-2659.
[15]	陈慈航, 明开胜, 毕晓昉. 热处理对FeCo-2V-0.5Cr软磁合金力学与磁学性能的影响[J]. 航空学报, 2014, 35(10): 2813-2818.