航空学报 > 2014, Vol. 35 Issue (6): 1633-1642   doi: 10.7527/S1000-6893.2013.0462

基于二维线阵和空间滤波器的结构冲击无波速定位方法

刘彬1,2, 邱雷1, 袁慎芳1   

  1. 1. 南京航空航天大学 机械结构力学及控制国家重点实验室, 江苏 南京 210016;
    2. 空军勤务学院 航空军交运输指挥系, 江苏 徐州 221006
  • 收稿日期:2013-07-29 修回日期:2013-11-08 出版日期:2014-06-25 发布日期:2013-11-20
  • 通讯作者: 袁慎芳,Tel.:025-84893460 E-mail:ysf@nuaa.edu.cn E-mail:ysf@nuaa.edu.cn
  • 作者简介:刘彬男,博士研究生。主要研究方向:阵列信号处理。Tel:025-84893484 E-mail:khqliubin@nuaa.edu.cn;邱雷男,博士,讲师。主要研究方向:结构健康监测、信号处理、系统集成。Tel:025-84893484 E-mail:ql19830925@nuaa.edu.cn;袁慎芳女,博士,教授,博士生导师。主要研究方向:智能材料与结构、结构健康监测、信号处理。Tel:025-84893460 E-mail:ysf@nuaa.edu.cn
  • 基金资助:

    国家杰出青年基金(51225502);国家自然科学基金(51205189);中国博士后科学基金(2012M510183);中央高校基本科研业务费专项资金(NN2012051);高等学校博士学科点专项科研基金(20123218120007);江苏高校优势学科建设工程资助项目

Structure Impact Localization Method Based on 2D Linear Array and Spatial Filter Without Wave Velocity

LIU Bin1,2, QIU Lei1, YUAN Shenfang1   

  1. 1. State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
    2. Department of Air Force Military Transportation, Air Force Logistics College, Xuzhou 221006, China
  • Received:2013-07-29 Revised:2013-11-08 Online:2014-06-25 Published:2013-11-20
  • Supported by:

    National Science Fund for Distinguished Young Scholars (51225502); National Natural Science Foundation of China (51205189); China Postdoctoral Science Foundation (2012M510183); The Fundamental Research Funds for the Central Universities (NN2012051); Research Fund for the Doctoral Program of Higher Education of China (20123218120007); A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions

摘要:

复合材料在航空结构中的应用越来越广,但其遭受外界物体冲击后很容易在内部产生表面不可见损伤,所以对复合材料结构的冲击事件进行在线监测十分必要。基于压电传感器(PTZ)和Lamb波的冲击定位方法是目前的研究热点,但是Lamb波信号在复合材料结构中传播的各向异性给冲击定位带来了困难。本文将空间滤波器算法推广到复合材料结构的冲击监测应用中,研究了与波速无关的空间滤波器冲击定位原理,提出了基于二维线性压电传感器阵列和空间滤波器的结构冲击无波速定位方法。该方法首先采用Shannon连续复数小波变换提取并构建宽带冲击响应信号中的窄带Lamb波解析信号;然后利用波速无关的空间滤波器算法计算出结构冲击相对于各条线性压电传感器阵列的角度;最后使用冲击无波速定位公式计算出结构冲击的位置坐标。在碳纤维层合板上对该方法进行了实验验证。验证结果表明:该方法可以实现对复合材料结构的冲击进行不依赖信号传播速度的定位,定位误差小于1 cm。

关键词: 复合材料结构, 结构健康监测, 空间滤波器, Lamb波, 波速

Abstract:

Composite materials are widely used in aerospace structures. But invisible damages will occur on them after suffering impact from external objects. Therefore, online structural health monitoring of impact events for composite structures is essential. One of the focuses of current research on impact location is based on piezoelectric sensors (PZTs) and Lamb wave. But the anisotropy of the Lamb wave in a composite structure makes it difficult to use it to locate the position of impact. In this paper, the algorithm of spatial filter for impact location is extended to composite structures and the theory of impact location by the spatial filter without the information of wave velocity is studied. The method of 2D linear PZTs array and spatial filter is proposed for impact location without wave velocity. Firstly, a narrowband Lamb analytic signal is extracted from the broadband impact response signal by a complex Shannon wavelet transform. Then, the angle of impact position relative to the array is calculated by the spatial filter without using the Lamb velocity. Finally, the impact position is calculated by the impact localization formula without velocity. This method is verified on a carbon fiber reinforced polymer. The verification results show that the method proposed can locate the structure impact without using the Lamb velocity in composite structures, and the error of localization is less than 1 cm.

Key words: composite structure, structural health monitoring, spatial filter, Lamb wave, wave velocity

中图分类号: