航空学报 > 2013, Vol. 34 Issue (10): 2341-2348   doi: 10.7527/S1000-6893.2013.0162

无限大板圆孔边双裂纹的裂纹面位移权函数解

童第华, 吴学仁   

  1. 中国航空工业集团公司 北京航空材料研究院, 北京 100095
  • 收稿日期:2012-12-27 修回日期:2013-03-05 出版日期:2013-10-25 发布日期:2013-03-19
  • 通讯作者: 吴学仁,Tel.: 010-62458033 E-mail: xueren.wu@gmail.com E-mail:xueren.wu@gmail.com
  • 作者简介:童第华 男, 博士研究生。主要研究方向: 疲劳与断裂力学。 Tel: 010-62496725 E-mail: tongdi133@163.com;吴学仁 男, 博士, 研究员, 博士生导师, 中国航空工业集团公司资深首席技术专家。主要研究方向: 断裂力学与疲劳、 损伤容限技术、 材料的力学行为等。 Tel: 010-62458033 E-mail: xueren.wu@gmail.com

Weight Function Solutions of Crack Surface Displacements for Double Cracks Emanating from a Circular Hole in an Infinite Plate

TONG Dihua, WU Xueren   

  1. Beijing Institute of Aeronautical Materials, AVIC, Beijing 100095, China
  • Received:2012-12-27 Revised:2013-03-05 Online:2013-10-25 Published:2013-03-19

摘要:

针对飞机结构中常见的孔边裂纹问题,结合塑性诱发的疲劳裂纹闭合分析需求,利用权函数封闭解法计算了无限大板圆孔边双裂纹在远方拉伸和部分裂纹面均布应力两种载荷条件下的裂纹面位移。研究表明,权函数法是一种强有力的计算任意载荷条件下裂纹面位移的高效、高精度方法。通过对权函数法计算结果的合理拟合,得到了两种载荷条件下裂纹面位移的高精度解析表达式,从而为无限大板圆孔边双裂纹的裂纹闭合分析和张开应力求解提供了高效、高精度的手段。

关键词: 孔边裂纹, 裂纹面位移, 条带屈服模型, 权函数法, 裂纹面位移方程

Abstract:

This paper is aimed at crack surface displacement solutions for cracks at a circular hole, which is a common crack configuration in aircraft structures. The weight function method is used for calculating crack surface displacements for double cracks under both remote uniform tension and partial crack surface uniform segment loading. It is found that the weight function method is a very efficient and highly accurate method for calculating crack surface displacements under arbitrary load conditions. By rational curve fitting to the results obtained from the weight function method, accurate analytical expressions for crack surface displacements for the two load cases are developed. The present study provides an efficient and accurate means for crack closure and crack opening stress analysis for double cracks emanating from a circular hole in an infinite plate.

Key words: crack at a circular hole, crack surface displacement, strip-yield model, weight function method, crack surface displacement equation

中图分类号: