基于研制信息的测试性验证试验方案研究

电子与自动控制

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于研制信息的测试性验证试验方案研究

常春贺^1,2, 杨江平¹, 曹鹏举¹

1. 空军预警学院, 湖北武汉 430019;
2. 95980部队, 湖北襄阳 441021

收稿日期:2011-11-16 修回日期:2011-12-12 出版日期:2012-11-25 发布日期:2012-11-22
通讯作者: 杨江平 E-mail:yjp_wh@163.com
基金资助:
"十二五"军内科研重点项目(KJ2011196)

Study on the Scheme of Testability Demonstration Test Based on Development Information

CHANG Chunhe^1,2, YANG Jiangping¹, CAO Pengju¹

1. Air Force Early Warning Academy, Wuhan 430019, China;
2. 95980 Unit of the PLA, Xiangyang 441021, China

Received:2011-11-16 Revised:2011-12-12 Online:2012-11-25 Published:2012-11-22
Supported by:
The Key Project of Military Scientific Research during the 12th Five-Year Plan Period (KJ2011196)

摘要/Abstract

摘要： 针对现有测试性验证试验方案需要较大故障样本量的问题,提出了一种利用研制信息制定测试性验证试验方案的新方法。首先,在二项分布经典抽样模型的基础上,运用证据理论方法,研究了基于测试性试验数据、测试性预计结果和专家经验等研制信息的基本信任分配函数的构造方法,建立了基于融合不同种类研制信息的测试性验证试验方案,并确定了该方案的存在性,给出了方案的确定方法,最后开展了案例应用研究。由于充分考虑了研制信息,因此在确保有较好的验证效果的条件下,与传统的试验方案相比,该方法可以明显减少故障样本量,或在样本量保持不变的情况下有效降低双方风险。

关键词: 测试性验证试验, 方案, 分配函数, 证据理论, 故障样本量

Abstract: In view of the fact that the existing testability demonstration tests usually require a large fault sample size, a new method for determining the test scheme based on development information is proposed in this paper. Firstly, after analyzing the classical test model based on binomial distribution, a basic probability assignment is established by using a variety of development information, which includes testability test data, testability prediction result and expert experience. The proposed method is studied for determining a demonstration test scheme by applying the evidence theory, and the existence of the optimal test scheme is conformed. At the same time, a method is given to determine the test scheme. Finally, an example is provided to validate the new method. The result shows that this method can make full use of the testability development information and ensure good validation effect. Compared to traditional test scheme, this method can reduce the size of test fault samples and risk level with the sample size unchanged.

Key words: testability demonstration test, scheme, distribution functions, evidence theory, fault sample size

中图分类号:

TP302.8
TJ06

常春贺, 杨江平, 曹鹏举. 基于研制信息的测试性验证试验方案研究[J]. 航空学报, 2012, 33(11): 2057-2064.

CHANG Chunhe, YANG Jiangping, CAO Pengju. Study on the Scheme of Testability Demonstration Test Based on Development Information[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(11): 2057-2064.

参考文献

[1] Shi J Y. Design, analysis and demonstration of testability. Beijing: National Defense Industry Press, 2011: 1-15. (in Chinese) 石君友. 测试性设计分析与验证. 北京: 国防工业出版社, 2011: 1-15.
[2] Department of Defense Washington D C. Maintainability verification/demonstration/evaluation. MIL-STD-471A, 1973.
[3] Pliska T F, Jew F L, Angus J E. BIT/External test figures of merit and demonstration techniques. ADA081128, 1979.
[4] National Science and Technology Industrial Committee. GJB 2072-94 Maintainability test and evaluation. Beijing: Standards Press of China, 1994. (in Chinese) 国防科学技术工业委员会. GJB 2072-94 维修性试验与评定.北京: 中国标准出版社, 1994.
[5] National Science and Technology Industrial Committee. GJBZ 20045-91 The measuring and testing of performance characteristics of radar monitoring and control subsystem fault detection rate, fault isolation rate and false alarm rate of the bit. Beijing: Standards Press of China, 1994. (in Chinese) 国防科学技术工业委员会. GJBZ 20045-91雷达监控分系统性能测试性方法: BIT故障发现率、故障隔离率、虚警率. 北京: 中国标准出版社, 1991.
[6] Zhou Y F, Xu S T, Gao X J. The theory and method in testability demonstration test. Electronic Product Reliability and Environmental Testing, 1998 (2):10-15. 周玉芬,徐松涛,高锡俊.测试性验证的理论和方法研究.电子产品可靠性与环境试验,1998(2): 10-15.
[7] Tian Z, Shi J Y. The analysis and suggestion of testability demonstration methods. Quality and Reliability, 2006 (2): 47-51. (in Chinese) 田仲,石君友. 现有测试性验证方法分析与建议. 质量与可靠性, 2006 (2): 47-51.
[8] Shi J Y, Kang R. Study on the plan of testability demonstration based on the general adequacy criterion. Acta Aeronautica et Astronautica Sinica, 2005, 26(6): 691-695. (in Chinese) 石君友, 康锐.基于通用充分性准则的测试性试验方案研究. 航空学报, 2005, 26(6): 691-695.
[9] Li T M, Qiu J, Liu G J. Research on testability field statistic verification based on Bayes inference theory of dynamic population. Acta Aeronautica et Astronautica Sinica, 2010, 31(2): 335-341. (in Chinese) 李天梅, 邱静, 刘冠军. 基于Bayes变动统计理论的测试性外场统计验证方法. 航空学报, 2010, 31(2): 335-341.
[10] Shi J Y, Tian Z. Testability verification method based on data evaluation in development phase. Acta Aeronautica et Astronautica Sinica, 2009, 30(5): 901-905. (in Chinese) 石君友, 田仲. 测试性研制阶段数据评估验证方法. 航空学报, 2009, 30(5): 901-905.
[11] Tian Y M, Zhang Z H, Guo S F. A Bayesian scheme of reliability acceptance test in binomial case. Operations Research and Management Science, 2004, 13(4): 65-68. (in Chinese) 田艳梅, 张志华, 郭尚峰. 二项分布下的一种贝叶斯可靠性验收试验方案. 运筹与管理, 2004, 13(4): 65-68.
[12] Zhang Z H, Jiang L P. A Bayesian plan of qualification test for product in binomial case. Journal of Naval University of Engineering, 2004, 16(1): 9-13. (in Chinese) 张志华, 姜礼平. 成败型产品的Bayes鉴定试验方案研究. 海军工程大学学报, 2004, 16(1): 9-13.
[13] Zhan H K, Jiang L P, Yuan B C. Reliability qualification test in binomial case based on maximum-entropy priors. Chinese Journal of Engineering Mathematics, 2005, 22(4): 653-658. (in Chinese) 詹昊可, 姜礼平, 苑秉成. 最大熵先验下成败型产品成功率的鉴定试验方案. 工程数学学报, 2005, 22(4): 653-658.
[14] Ming Z M, Tao J Y, Chen X, et al. A Bayes plan of reliability qualification test based on the mixed Beta distribution for success/failure product. Acta Armamentarii, 2008, 29(2): 205-207. (in Chinese) 明志茂, 陶俊勇, 陈循, 等. 基于混合Beta分布的成败型产品Bayes可靠性鉴定试验方案研究. 兵工学报, 2008, 29(2): 205-207.
[15] Zhao Y, Huang M, Yu D, et al. The methodology for conducting the integrated verification of product reliability with test data acquired in the development phase. Acta Aeronautica et Astronautica Sinica, 2005, 26(5):637-640. (in Chinese) 赵宇, 黄敏, 于丹, 等. 利用试验数据的产品可靠性综合验证方案确定方法. 航空学报, 2005, 26(5): 637-640.
[16] Li T M, Qiu J, Liu G J. New methodology for determining testability integrated test scheme with test data in the development stages. Journal of Mechanical Engineering, 2009, 45(8): 52-57. (in Chinese) 李天梅, 邱静, 刘冠军. 利用研制阶段试验数据制定测试性验证试验方案新方法. 机械工程学报, 2009, 45(8): 52-57.
[17] Zhou H, Zhao X P, Wu W J. Study on the method of testability assessment of some launcher based on Bayes theory. Journal of Projectiles, Rockets, Missiles and Guidance, 2010, 30(3): 253-256. (in Chinese) 周昊, 赵修平, 吴文军. 基于Bayes理论的发射装置测试性评估方法研究. 弹箭与制导学报, 2010, 30(3): 253-256.
[18] Yang F B, Wang X X. Combination method of conflictive evidences in D-S evidence theory. Beijing: National Defense Industry Press, 2010: 15-29. (in Chinese) 杨凤暴, 王肖霞. D-S证据理论的冲突证据合成方法. 北京: 国防工业出版社, 2010: 15-29.
[19] Zhu H W, Otman B. A scheme for constructing evidence structures in Demspter-Shafer evidence theory for data fusion. Proceedings of 2003 IEEE International Symposium on Computational Intelligence in Robotics and Automation, 2003: 960-965.
[20] Chang C H, Yang J P, Zhang Y. Study on modeling and analysis of testability evaluation index for complex equipment. Proceedings of ITME, 2011: 67-70.
[21] Li X J. Beta distribution approximation of confidence distributions and application in reliability statistics. Structure ＆ Environment Engineering, 2007, 34(2): 17-23. (in Chinese) 李学京. 置信分布的贝塔分布近似及其在可靠性统计中的应用. 强度与环境, 2007, 34(2): 17-23.
[22] Li X Y, Jiang T M, Xiao L H. Development algorithm of single sampling inspection plan of pass-fail experiment. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(8): 904-907. (in Chinese) 李晓阳, 姜同敏, 肖良华. 成败型一次抽样检验方案算法的等价变形. 北京航空航天大学学报, 2005, 31(8): 904-907.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于研制信息的测试性验证试验方案研究

Study on the Scheme of Testability Demonstration Test Based on Development Information

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周千里, 邓勇. 基于量子演化的信度函数概率转换[J]. 航空学报, 2022, 43(S1): 726947-726947.
[2]	王俊龙, 楼京俊, 阮旻智, 徐立. 面向满足率与利用率的通用备件优化配置方法[J]. 航空学报, 2022, 43(5): 226978-226978.
[3]	徐立, 阮旻智, 李华, 周亮. 威布尔型通用件配置方案评估及优化[J]. 航空学报, 2021, 42(9): 224655-224655.
[4]	杨希祥, 朱炳杰, 邓小龙, 麻震宇. Stratobus平流层飞艇项目研究进展与仿真分析[J]. 航空学报, 2021, 42(9): 224579-224579.
[5]	尹东亮, 黄晓颖, 吴艳杰, 何有宸, 谢经伟. 基于云模型和改进D-S证据理论的目标识别决策方法[J]. 航空学报, 2021, 42(12): 324768-324768.
[6]	李少伟, 宋文滨. 价值驱动设计方法及其在商用飞机方案参数优化中的应用[J]. 航空学报, 2020, 41(7): 223583-223583.
[7]	徐立, 张宁, 李华, 阮旻智, 周亮. 常见寿命分布组件初始贮存方案评估及优化[J]. 航空学报, 2020, 41(4): 223441-223441.
[8]	常琦, 杨维希, 赵恒, 孟瑶, 刘君, 高鹤明. 基于多传感器的裂纹扩展监测研究[J]. 航空学报, 2020, 41(2): 223336-223336.
[9]	陈文武, 黄利亚, 夏智勋, 李鹏飞. 跨介质冲压发动机理论性能与工作参数分析[J]. 航空学报, 2020, 41(11): 123764-123764.
[10]	杨鹏, 谢皓宇, 邱静. 一种基于二次分配的测试性指标分配方法[J]. 航空学报, 2019, 40(9): 323070-323070.
[11]	陈名乾. 民用飞机商载航程图解析方程的建立及应用[J]. 航空学报, 2019, 40(2): 522407-522407.
[12]	张新榃, 张帅, 王建礼, 周彬. 支撑翼布局客机总体参数对结构重量的影响[J]. 航空学报, 2019, 40(2): 522359-522359.
[13]	王康, 史贤俊, 周绍磊, 龙玉峰, 孙美美. 基于优化SPOT和D-S证据理论的测试性验证方案[J]. 航空学报, 2019, 40(11): 223064-223064.
[14]	郑建军, 唐吉运, 王彬文. C919飞机全机静力试验技术[J]. 航空学报, 2019, 40(1): 522364-522364.
[15]	王鑫, 王刚, 张雪飞, 何乾强. 基于CFD的座舱盖加温疲劳试验台设计方案优选[J]. 航空学报, 2018, 39(8): 121863-121863.