[1] Ren J X, Zhang D H, Wang Z Q, et al. Research on the NC machining technique of blisk. Acta Aeronautica et Astronautica Sinica, 2004, 25(2): 205-208. (in Chinese) 任军学, 张定华, 王增强, 等. 整体叶盘数控加工技术研究. 航空学报, 2004, 25(2): 205-208. [2] Ren J X, Jiang Z N, Yao C F, et al. Process for 4-axis high efficiency slot plunge milling of open blisk. Acta Aeronautica et Astronautica Sinica, 2008, 29(6): 1692-1698. (in Chinese) 任军学, 姜振南, 姚倡锋, 等. 开式整体叶盘四坐标高效开槽插铣工艺方法. 航空学报, 2008, 29(6): 1692-1698. [3] Nan C F, Wu B H, Zhang D H. A global interference free tool path generation algorithm for five-axis end milling of complex tunnel parts. Acta Aeronautica et Astronautica Sinica, 2010, 31(10): 2103-2108. (in Chinese) 南长峰, 吴宝海, 张定华. 复杂通道类零件五坐标加工全局干涉处理方法. 航空学报, 2010, 31(10): 2103-2108. [4] Zhou Z H. Study on 4-axis NC machining technology for axial-flow blade. Beijing: School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, 2008. (in Chinese) 周正浩. 轴流叶片四坐标数控加工研究. 北京: 北京交通大学机械与电子控制工程学院, 2008. [5] Wu B H, Wang S J. Research on 4-axis numerical control machining of free-form surface impellers. Acta Aeronautica et Astronautica Sinica, 2007, 28(4): 993-998. (in Chinese) 吴宝海, 王尚锦. 自由曲面叶轮的四坐标数控加工研究. 航空学报, 2007, 28(4): 993-998. [6] Wu L P, Shi F Z, Chen W D. Interference free cutter location data computation for flat end mill in 4-axis NC machining. Journal of Beijing University of Aeronautics and Astronautics, 2002, 28(6): 625-628. (in Chinese) 吴丽萍, 施法中, 陈卫东. 四轴端刀无干涉刀位点计算. 北京航空航天大学学报, 2002, 28(6): 625-628. [7] Wu L P, Shi F Z, Chen W D, et al. Interference free toolpath generation of rotationally free surfaces in four-axis NC machining. Journal of Beijing University of Aeronautics and Astronautics, 2002, 28(3): 305-308. (in Chinese) 吴丽萍, 施法中, 陈卫东, 等. 回转类零件的四轴无干涉刀位轨迹生成. 北京航空航天大学学报, 2002, 28(3): 305-308. [8] Bi Q Z, Wang Y H, Zhu L M, et al. Wholly smoothing cutter orientations for five-axis NC machining based on cutter contact point mesh. Scientia Sinica: Technologica, 2010, 40(10): 1159-1168. (in Chinese) 毕庆贞, 王宇晗, 朱利民, 等. 刀触点网格上整体光顺五轴数控加工刀轴方向的模型与算法. 中国科学:技术科学, 2010, 40(10): 1159-1168. [9] Ho M C, Hwang Y R, Hu C H. Five-axis tool orientation smoothing using quaternion interpolation algorithm. International Journal of Machine Tools and Manufacture, 2003, 43(12): 1259-1267. [10] Castagnetti C, Duc E, Ray P. The domain of admissible orientation concept: a new method for five-axis tool path optimisation. Computer-Aided Design, 2008, 40(9): 938-950. [11] Jun C S, Cha K, Lee Y S. Optimizing tool orientations for 5-axis machining by configuration-space search method. Computer-Aided Design, 2003, 35(9): 549-566. [12] Bi Q Z, Wang Y H, Ding H. A GPU-based algorithm for generating collision-free and orientation-smooth five-axis finishing tool paths of a ball-end cutter. International Journal of Production Research, 2010, 48(4): 1105-1124. [13] Balasubramaniam M, Sarma S E, Marciniak K. Collision-free finishing toolpaths from visibility data. Computer-Aided Design, 2003, 35(4): 359-374. [14] Wang N, Tang K. Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath. Computer-Aided Design, 2007, 39(10): 841-852. [15] Fan J, Ball A. Quadric method for cutter orientation in five-axis sculptured surface machining. International Journal of Machine Tools and Manufacture, 2008, 48(7-8): 788-801. [16] Ji J F, Zhou L S, An L L, et al. Generation and the smoothing method of 5-axis NC machining tool orientation for the open integrated impeller. China Mechanical Engineering, 2009, 20(2): 202-206. (in Chinese) 姬俊锋, 周来水, 安鲁陵, 等. 一类开式整体叶轮五坐标数控加工刀轴矢量生成及其光顺方法的研究. 中国机械工程, 2009, 20(2): 202-206. [17] Shi F Z. Computer-aided geometric design & non-uniform rational B-spline. Beijing: Higher Education Press, 2001. (in Chinese) 施法中. 计算机辅助几何设计与非均匀有理B样条.北京: 高等教育出版社, 2001. |