[1] Dorman E E, Welna H, Lindlauf R W. The application of controlled-vortex aerodynamics to advanced axial flow turbines. ASME Paper GT-1968-4, 1968.[2] Snedden G, Dunn D, Ingram G, et al. The application of non-axisymmetric endwall contouring in a single stage, rotating turbine.ASME Paper GT-2009-59169, 2009.[3] Duden A, Raab I, Fottner L. Controlling the secondary flow in a turbine cascade by three-dimensional airfoil design and endwall contouring[J]. Journal of Turbomachinery, 1999, 121(2): 191-199.[4] Fischer A, Riess W, Seume J R. Performance of strongly bowed stators in a four-stage high-speed compressor[J]. Journal of Turbomachinery, 2004, 126(3): 333-338.[5] Zhao G J, Chen F, Song Y P, et al. Experimental study on the aerodynamic performance of swept-curved blade[J]. Chinese Journal of Aeronautics, 2004, 17(3): 136-141.[6] Vad J, Kwedikha A R A, Horváth C, et al. Aerodynamic effect of forward blade skew in axial flow rotors of controlled vortex design[J]. Journal of Power and Energy, 2007, 221(7): 1011-1023.[7] 宁方飞, 刘晓嘉. 一种新的响应面模型及其在轴流压气机叶型气动优化中的应用[J]. 航空学报, 2007, 28(4): 813-820. Ning Fangfei, Liu Xiaojia. A new response surface model and its applications in the aerodynamic optimization of axial compressor blade profile[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(4): 813-820. (in Chinese)[8] 樊会元, 王尚锦, 席光. 透平机械叶片的遗传优化设计[J]. 航空学报, 1999, 20(1): 47-51. Fan Huiyuan, Wang Shangjin, Xi Guang. Optimization of the blades for turbomachine by genetic algorithm[J]. Acta Aeronautica et Astronautica Sinica, 1999, 20(1): 47-51. (in Chinese)[9] Zhou F Z, Feng G T, Jiang H D. The development of highly loaded turbine rotating blades by using 3D optimization design method of turbomachinery blades based on artificial neural network & genetic algorithm[J]. Chinese Journal of Aeronautics, 2003, 16(4): 198-202.[10] Coucbman R S, Robbins K E, Schofield P. GE steam turbine design philosophy and technology programs. GE Power Generation, GER-3705, 1991.[11] Cofer IV J I, Reinker J K, Sumner W J. Advances in steam path technology. GE Power Generation, GER-3713E, 1996.[12] Plaia J M, Lear W E. Preliminary turbine design for non-uniform inlet conditions. AIAA-1997-3010, 1997.[13] Sell M, Schlienger J, Pfau A, et al. The 2-stage axial turbine test facility "LISA". ASME Paper GT-2001-492, 2001.[14] Stephan B, Gallus H E, Niehuis R. Experimental investigations of tip clearance flow and its influence on secondary flows in a 1-1/2 stage axial turbine. ASME Paper GT-2000-613, 2000.[15] König S, Stoffe B, Schobeiri M T. Experimental investigation of the clocking effect in a 1.5-stage axial turbine-part I: time-averaged results[J]. Journal of Turbomachinery, 2009, 131(2): 021004-021011. |