基于机器视觉与UMAC的自动铺丝成型构件缺陷检测闭环控制系统

doi:10.7527/S1000-6893.2015.0243

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于机器视觉与UMAC的自动铺丝成型构件缺陷检测闭环控制系统

文立伟¹, 宋清华¹, 秦丽华², 肖军¹

1. 南京航空航天大学材料科学与技术学院, 南京 210016;
2. 北京航天长征飞行器研究所, 北京 100076

收稿日期:2015-06-25 修回日期:2015-08-31 出版日期:2015-12-15 发布日期:2015-09-06
通讯作者: 文立伟,Tel.:025-84892980,E-mail:liwei-wen@163.com E-mail:liwei-wen@163.com
作者简介:文立伟,男,博士,副教授。主要研究方向:复合材料自动化装备技术。Tel:025-84892980,E-mail:liwei-wen@163.com;宋清华,男,博士研究生。主要研究方向:复合材料自动化铺放技术。Tel:025-84892980,E-mail:sqinghua1987@163.com
基金资助:
国家"973"计划(2014CB046501);江苏省高校优势学科建设工程

Defect detection and closed-loop control system for automated fiber placement forming components based on machine vision and UMAC

WEN Liwei¹, SONG Qinghua¹, QIN Lihua², XIAO Jun¹

1. College of Materials Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
2. Beijing Institute of Space Long March Vehicle, Beijing 100076, China

Received:2015-06-25 Revised:2015-08-31 Online:2015-12-15 Published:2015-09-06
Supported by:
National Basic Research Program of China (2014CB046501); Priority Academic Program Development of Jiangsu Higher Education Institutions

摘要/Abstract

摘要：

为保证自动铺丝成型构件的性能,实现对成型构件表面质量的高效检测,本文基于机器视觉检测技术,自行研发自动铺丝成型构件表面缺陷检测闭环控制系统,使自动铺丝过程中预浸纱之间的间隙或重叠在允许范围内,从而保证铺丝精度。研究主要分为三个部分:铺丝成型构件表面图像提取与缺陷检测,检测数据传输,运动轴反馈控制,实现在自动铺丝过程中对成型构件表面缺陷检测实时闭环控制。针对电荷耦合相机采集到的预浸纱图像存在运动模糊和信噪比低等问题,将图像预处理划分为图像复原和降噪两大功能,根据不同类型的噪声采用对应滤波法进行降噪处理,提高了图像的信噪比,为后续检测提供高质量图像;预浸纱缺陷主要由其边缘直线这一几何特征进行表征,因此通过对预浸纱边缘检测实现缺陷识别;利用工控机向图像采集控制器发送命令实现图像采集,同时通过工控机与运动控制器之间信息流和数据流的交换实现检测数据的传输。探讨模糊控制理论用于闭环控制的研究,在反模糊化环节后面,加入自适应参数调节,以适应加工过程的突变,并成功地应用到自动铺丝缺陷检测闭环控制系统中,提高了伺服跟踪精度和跟踪实时性,从而提高铺丝精度。

关键词: 自动铺丝, CCD相机, UMAC, 缺陷检测, 闭环控制, 模糊控制

Abstract:

In order to ensure the performance and accuracy of the automated fiber placement (AFP) forming components, detect the quality of the forming components effectively and control the spacing between the fibers, this paper designs a forming components defect detection and real-time closed-loop control system based on the machine vision technology. The control program is divided into three main parts:image acquisition and defect detection, data transmission and the motion-axis feedback control. Considering the problem that the images captured by the camera have motion blur and low signal-to-noise ratio (SNR), the image preprocessing module has been divided into image restoration function and noise reduction function. According to different types of noises, a variety of filtering methods have been used to reduce the noise and improve the SNR of images, providing good quality of the prepreg image for edge extraction. The prepreg defect can be mainly described by the edge line, so we further study the prepreg edge location to realize defect detection. It is necessary to solve the function of sending command to image acquistion controller communication by industrial computer, and exchanging of information between industrial computer and UMAC to realize the data transmission. In addition, this paper discusses the fuzzy control theory. The adaptive parameter is introduced after the defuzzification to adapt to the velocity jump. The fuzzy control theory is successfully applied to the forming components defect detection and real-time closed-loop control system, and it has a high tracing accuracy.

Key words: automated fiber placement, CCD camera, UMAC, defect detection, closed-loop control, fuzzy control

中图分类号:

文立伟, 宋清华, 秦丽华, 肖军. 基于机器视觉与UMAC的自动铺丝成型构件缺陷检测闭环控制系统[J]. 航空学报, 2015, 36(12): 3991-4000.

WEN Liwei, SONG Qinghua, QIN Lihua, XIAO Jun. Defect detection and closed-loop control system for automated fiber placement forming components based on machine vision and UMAC[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(12): 3991-4000.

参考文献

[1] Zhang Q T. Research on stacking design of automated fiber placement technology[D]. Wuhan:Wuhan University of Technology, 2014(in Chinese).张庆涛.自动铺丝技术铺层设计的研究[D].武汉:武汉理工大学, 2014.
[2] Sun C. Research on automated fiber placement technology of composite wing spar[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2013(in Chinese).孙成.复合材料翼梁自动铺丝技术研究[D].南京:南京航空航天大学, 2013.
[3] Feng Y, Zheng X T, Wu S Y, et al. Layup optimization design and analysis of super lightweight composite wing[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(6):1858-1866(in Chinese).冯雁,郑锡涛,吴淑一,等.轻型复合材料机翼铺层优化设计与分析[J].航空学报, 2015, 36(6):1858-1866.
[4] Zhang J B, Zhao W Y, Wang J F, et al. Research status of automated placement processing technology of composites[J]. Aeronautical Manufacturing Technology, 2014(16):80-83(in Chinese).张建宝,赵文宇,王俊锋,等.复合材料自动铺放工艺技术研究现状[J].航空制造技术, 2014(16):80-83.
[5] Feng W, Ait-kadi A, Riedl B. Polymerization compounding:epoxy-montmorillonite nanocomposites[J]. Polymer Engineering & Science, 2002, 42(9):1827-1835.
[6] Wen Q H, Wang X F, He S M, et al. Influence of temperature on placement effect of prepreg[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(9):1740-1745(in Chinese).文琼华,王显峰,何思敏,等.温度对预浸料铺放效果的影响[J].航空学报, 2011, 32(9):1740-1745.
[7] Chu Q Y, Xiao J, Li Y, et al. Pullout performance of carbon fiber/epoxy Z-pins[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(4):1312-1319(in Chinese).褚奇奕,肖军,李勇,等.碳纤维增强环氧Z-pin拔脱性能[J].航空学报, 2015, 36(4):1312-1319.
[8] Zhang Q D. Evaluation methods of composite mechanical property test and standardization[J]. Fiber Reinforced Plastics/Composite, 2000(4):37-38(in Chinese).张勤德.玻璃钢纤维缠绕设备缠绕精度的影响因素及提高方法[J].纤维复合材料, 2000(4):37-38.
[9] Fang Y W, Wang X F, Xiao J et al. AFP of composite wing spar based on fiber steering algorithm[J]. Aeronautical Manufacturing Technology, 2014(16):90-93(in Chinese).方宜武,王显峰,肖军,等.基于变角度算法的复合材料翼梁自动铺丝[J].航空制造技术, 2014(16):90-93.
[10] Hai D J. Fundamental research on CAD/CAM technology of composite material automated placement[D]. Nanjing:Nanjing University of Aeronautics and Astronautic, 2010(in Chinese).还大军.复合材料自动铺放CAD/CAM关键技术研究[D].南京:南京航空航天大学, 2010.
[11] An L L, Yang Y L, Xiao J. Study of collision and interference inspection algorithm in automatic composite fiber placement[J]. Aerospace Materials & Technology, 2007(2):51-54(in Chinese).安鲁陵,杨玉岭,肖军,等.复合材料纤维自动铺放过程碰撞干涉检测[J].宇航材料工艺, 2007(2):51-54.
[12] Sun Z J. Design of automatic correct offset control system[J]. Mechanical Engineering & Automation, 2010(4):138-140(in Chinese).孙智娟.自动纠偏控制系统的设计与开发[J].机械工程与自动化, 2010(4):138-140.
[13] Engelbart R W, Hannebaum R. Verification of tow cut for automatic fiber placement:United States, US 8377239[P]. 2013-02-19.
[14] Engelbart R W, Hannebaum R, Rector E. Mapping tow splices in composite structures:United States, US 20110017380[P]. 2011-01-27.
[15] Oldani T. Visual fiber placement inspection:United States, US 20070173966[P]. 2007-07-26.
[16] Engelbart R W, Walters C. System for identifying defects in a composite structure:United States, US 20020141632[P]. 2002-03-10.
[17] Chen W, Cao L, Xiao J, et al. A vision-based real-time detection method of texture in automatic composite fiber placement[J]. Science Technology and Engineering, 2011, 11(18):4143-4149(in Chinese).陈文,曹力,肖军,等.基于视觉的复合材料自动铺放表面纹理实时检测方法[J].科学技术与工程, 2011, 11(18):4143-4149.
[18] Liu H. The research of image detection system of fiber tape laying based on machine vision[D]. Wuhan:Wuhan University of Technology, 2008(in Chinese).刘辉.基于机器视觉的纤维铺放角度及间距检测系统研究[D].武汉:武汉理工大学, 2008.
[19] Delta Tau Data Systems Inc. UMAC quick reference[M]. 2004:56-78.
[20] Delta Tau Data Systems Inc. UMAC Turbo CPU/communications board[M]. 2012:12-23.
[21] Liu L, Wen L W, Chen R B, et al. Numerical control system for automated tape laying machine[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2007, 39(4):486-490(in Chinese).刘林,文立伟,陈瑞斌,等.复合材料自动铺带机专用数控系统[J].南京航空航天大学学报, 2007, 39(4):486-490.
[22] Ji L, Yang Y, Fu S S, et al. An improved canny edge detection algorithm[J]. Microprocessors, 2015(1):486-490(in Chinese).吉玲,杨亚,付珊珊,等.一种改进的Canny边缘检测算法[J].微处理机, 2015(1):486-490.
[23] Liu L, Wen L W, Li Y, et al. Research on tape-cutting for automated tape laying Based on tracking control mode of PMAC[J]. Aerospace Materials & Technology, 2007(5):46-49(in Chinese).刘林,文立伟,李勇,等.基于PMAC随动控制模式下自动铺带切割的研究[J].宇航材料工艺, 2007(5):46-49.
[24] Su Z B. A kind of fuzzy controller used for PWM DC position control system[J]. Journal of Liaoyang Petrochemical College, 2002, 18(3):27-30(in Chinese).苏治宝.一种用于PWM直流位置控制系统的模糊控制器[J].辽阳石油化工高等专科学校学报, 2002, 18(3):27-30.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于机器视觉与UMAC的自动铺丝成型构件缺陷检测闭环控制系统

Defect detection and closed-loop control system for automated fiber placement forming components based on machine vision and UMAC

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘欢, 刘骁佳, 王宇斐, 王宁, 曹立俊. 基于复合卷积层神经网络结构的焊缝缺陷分类技术[J]. 航空学报, 2022, 43(S1): 726928-726928.
[2]	冉庆波, 肖鸿, 杨富鸿, 段玉岗. 含孔曲面自动铺丝轨迹规划算法[J]. 航空学报, 2022, 43(9): 425602-425602.
[3]	康硕, 柯臻铮, 王璇, 朱伟东. 基于红外和可见光图像融合的铺丝缺陷检测方法[J]. 航空学报, 2022, 43(3): 425187-425187.
[4]	王海峰, 邓枫, 刘学强, 覃宁. 基于喷流作用的自然层流翼型阵风载荷减缓控制[J]. 航空学报, 2022, 43(11): 526767-526767.
[5]	梁帅, 杨林, 杨朝旭, 许斌. 基于Kalman滤波的变体飞行器T-S模糊控制[J]. 航空学报, 2020, 41(S2): 724274-724274.
[6]	谢林杉, 陈浩然, 王浩宇. 面向复杂回转体的T700级碳纤维/双马树脂材料铺放适应性[J]. 航空学报, 2020, 41(4): 423279-423279.
[7]	宋桂林, 王显峰, 赵聪, 高天成, 薛柯. 规则回转体自动铺丝轨迹规划与丝束增减[J]. 航空学报, 2020, 41(11): 423704-423704.
[8]	段沐枫, 秦田亮, 沈裕峰, 徐吉峰. 自动铺丝最小间隙路径规划与复合材料锥壳结构制造[J]. 航空学报, 2019, 40(2): 522423-522423.
[9]	刘永佼, 王显峰, 肖军. 圆锥面等测地曲率曲线的轨迹规划方法[J]. 航空学报, 2017, 38(7): 420904-420904.
[10]	王晓冰, 赵忠良, 李浩, 达兴亚, 陶洋. 窄条翼导弹俯仰机动中滚转失稳及其控制过程[J]. 航空学报, 2016, 37(8): 2517-2524.
[11]	赵聪, 肖军, 王显峰, 李俊斐, 黄威. 丝束张力对自动铺丝成型工艺的影响[J]. 航空学报, 2016, 37(4): 1384-1392.
[12]	赵忠良, 吴军强, 李浩, 周为群, 毛代勇, 杨海泳. 2.4 m跨声速风洞虚拟飞行试验技术研究[J]. 航空学报, 2016, 37(2): 504-512.
[13]	席柯, 袁武, 阎超, 黄宇. 基于闭环控制的带翼导弹虚拟飞行数值模拟[J]. 航空学报, 2014, 35(3): 634-642.
[14]	何晓东, 史耀耀, 赵鹏兵. 复合材料布带缠绕成型压力控制技术[J]. 航空学报, 2014, 35(3): 868-877.
[15]	屠毅;林贵平. 大型飞机座舱温度控制系统仿真[J]. 航空学报, 2011, 32(1): 49-57.