基于优化Kriging模型和重要抽样法的结构可靠度混合算法

doi:10.7527/S1000-6893.2013.0235

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于优化Kriging模型和重要抽样法的结构可靠度混合算法

刘瞻¹, 张建国¹, 王灿灿¹, 谭春林², 孙京³

1. 北京航空航天大学可靠性与系统工程学院, 北京 100191;
2. 中国空间技术研究院北京空间飞行器总体设计部, 北京 100094;
3. 北京卫星制造厂, 北京 100094

收稿日期:2012-07-24 修回日期:2013-01-03 出版日期:2013-06-25 发布日期:2013-01-09
通讯作者: 张建国, Tel.: 010-82338356 E-mail: zjg@buaa.edu.cn E-mail:zjg@buaa.edu.cn
作者简介:张建国男, 博士, 教授, 博士生导师。主要研究方向: 机械及机构可靠性。 Tel: 010-82338356 E-mail: zjg@buaa.edu.cn
基金资助:
国家"973"计划(2013CB733000)

Hybrid Structure Reliability Method Combining Optimized Kriging Model and Importance Sampling

LIU Zhan¹, ZHANG Jianguo¹, WANG Cancan¹, TAN Chunlin², SUN Jing³

1. School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China;
2. Beijing Institute of Spacecraft Overall Design, China Academy of Space Technology, Beijing 100094, China;
3. Beijing Satellite Manufacturer, Beijing 100094, China

Received:2012-07-24 Revised:2013-01-03 Online:2013-06-25 Published:2013-01-09
Contact: 10.7527/S1000-6893.2013.0235 E-mail:zjg@buaa.edu.cn
Supported by:
National Basic Research Program of China (2013CB733000)

摘要/Abstract

摘要：

结构可靠度分析计算通常采用多项式响应面拟合隐式极限状态函数,但对于复杂航空航天机械结构产品极限状态方程往往表现出高度非线性,此时多项式响应面的模拟精度不够就会造成计算不收敛。为了提高结构可靠度计算的精度、效率和收敛性,提出了基于优化Kriging模型和重要抽样法的结构可靠度计算方法。首先,利用人工蜂群算法对Kriging模型的参数进行优化;再用优化后的模型模拟隐式极限状态函数,结合重要抽样法不断修正抽样重心,逐步提高模拟精度以达到给定要求;最后,结合一阶矩法(FORM)/二阶矩法(SORM)经典算法求解结构可靠度。该方法提高了高度非线性隐式极限状态方程可靠度计算的精度和收敛性,并且具有较高的计算效率。

关键词: 结构可靠度, Kriging模型, 重要抽样法, 函数拟合, 人工蜂群算法, 参数优化

Abstract:

In structural reliability analysis, a polynomial function is usually used to approach the implicit limit state function. But the limit state function is likely to be implicit and highly nonlinear for complex aeronautic and astronautic structures. The calculation may not converge if the simulation of the polynomial function is not accurate enough. In order to improve the accuracy, efficiency, and convergency, a reliability method combining the approved Kriging model and importance sampling is proposed in this paper. Firstly, the parameter of Kriging model is optimized using the artificial bee colony algorithm. Then the implicit limit state function is fitted with the optimized Kriging model, and the sampling center is revised constantly by importance sampling to improve gradually the fitting accuracy. Finally, the reliability is solved combining the Kriging model and the parsing algorithm such as the first order reliability method (FORM) or second order reliability method (SORM). This method improves the accuracy and convergency of reliability calculations with highly nonlinear limit state functions, and has high computing efficiency.

Key words: structure reliability, Kriging model, importance sampling, function fitting, artificial bee colony algorithm, parameter optimization

中图分类号:

V215.7

刘瞻, 张建国, 王灿灿, 谭春林, 孙京. 基于优化Kriging模型和重要抽样法的结构可靠度混合算法[J]. 航空学报, 2013, 34(6): 1347-1355.

LIU Zhan, ZHANG Jianguo, WANG Cancan, TAN Chunlin, SUN Jing. Hybrid Structure Reliability Method Combining Optimized Kriging Model and Importance Sampling[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(6): 1347-1355.

参考文献

[1] Melchers R E. Structural reliability analysis and predictions. New York: Wiley, 1999: 124-156.

[2] Nowak A S, Collins K R. Reliability of structures. Boston: McGraw-Hill, 2000: 32-35.

[3] Faravelli L. Response surface approach for reliability analysis. Journal of Engineering Mechanics, 1989, 115(12): 2763-2781.

[4] Zhang J G, Su D, Liu Y W. Reliability analysis and optimization of mechanical products. Beijing: Publishing House of Electronics Industry, 2007: 29-115. (in Chinese) 张建国, 苏多, 刘英卫. 机械产品可靠性分析与优化. 北京: 电子工业出版社, 2007: 29-115.

[5] Jiang S H, Li D Q, Phoon K. A comparative study of response surface method and stochastic response surface method for structural relisbility analysis. Engineering Journal of Wuhan University, 2012, 45(1): 46-53. (in Chinese) 蒋水华, 李典庆, 方国光. 结构可靠度分析的响应面法和随机响应面法的比较. 武汉大学学报: 工学版, 2012, 45(1): 46-53.

[6] Kaymaz I. Application of Kriging method to structural reliability problems. Structural Safety, 2005, 27(2): 133-151.

[7] Luo X F, Li X, Zhou J, et al. A Kriging-based hybrid optimization algorithm for slope reliability analysis. Structural Safety, 2012, 34(1): 401-406.

[8] Wang B, Sun Q. Structural reliability computation based on Kriging mode. Computer Simulation, 2011, 28(2): 113-116. (in Chinese) 汪保, 孙秦. 改进的Kriging模型的可靠度计算. 计算机仿真, 2011, 28(2): 113-116.

[9] Akay B, Karaboga D. A modified artificial bee colony algorithm for real-parameter optimization. Information Sciences, 2012, 192: 120-142.

[10] Karaboga D. An idea based on honey bee swarm for numerical optimization. Erciyes University Technical Report TR06, 2005.

[11] Liu L, Wang T Y. Support vector machine optimization based on artificial bee colony algorithm. Journal of Tianjin University, 2011, 44(9): 803-809. (in Chinese) 刘路, 王太勇. 基于人工蜂群算法的支持向量机优化. 天津大学学报, 2011, 44(9): 803-809.

[12] Lophaven S N, Nielsen H B, Sondergaard J. DACE, a matlab Kriging toolbox. Technical Report IMM-TR-2002-12, 2002.

[13] Lophaven S N, Nielsen H B, Sondergaard J. Aspects of the matlab toolbox DACE. Technical Report IMM-REP-2002-13, 2002.

[14] Li Y Y, Zhang D S. The analysis of plane frame structure displacement reliability based on MATLAB. Journal of Jiaying University: Natural Science, 2011, 29(2): 45-48. (in Chinese) 李远瑛, 张德生. 基于MATLAB的结构可靠度分析方法研究. 嘉应学院学报: 自然科学版, 2011, 29(2): 45-48.

[15] Xiao Y L, Su G S, Gaussian process importance sampling method for structural reliability analysis. Water Power, 2010, 36(12): 31-34. (in Chinese) 肖义龙, 苏国韶. 结构可靠度分析的高斯过程重要抽样方法. 水力发电, 2010, 36(12): 31-34.

[16] Bucher C G, Bourgand U. A fast and efficient response surface approach for structural reliability problems. Struct Safety, 1990, 7(1): 57-66.

[17] Romero V J, Swiler L P, Giunta A A. Construction of response surfaces based on progressive-lattice-sampling experimental designs with application to uncertainty propagation. Structural Safety, 2004, 26(2): 201-219.

[18] Giunta A, McFarland J, Swiler L, et al. The promise and peril of uncertainty quantification using response surface approximations. Structures and Infrastructure Engineering, 2006, 2(3): 175-189.

[19] Echard B, Gayton N, Lemaire M. AK-MCS: an active learning reliability method combining Kriging and Monte Carlo simulation. Structural Safety, 2011, 33(2): 145-154.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于优化Kriging模型和重要抽样法的结构可靠度混合算法

Hybrid Structure Reliability Method Combining Optimized Kriging Model and Importance Sampling

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	曹毅, 孟刚, 居勇健, 徐伟胜. 考虑伴生转动的大行程柔性微定位平台[J]. 航空学报, 2022, 43(7): 425498-425498.
[2]	王斌, 王海涛, 王玉峰, 张文武. 热障涂层水助激光扫描加工试验[J]. 航空学报, 2022, 43(4): 525353-525353.
[3]	吴宝海, 张阳, 郑志阳, 张莹, 张思琪. 数控加工进给速度参数优化研究现状与展望[J]. 航空学报, 2022, 43(4): 525467-525467.
[4]	郭磊, 高远, 辛会. 热障涂层的激光表面改性参数优化和结构设计[J]. 航空学报, 2021, 42(7): 424114-424114.
[5]	徐勇, 尹阔, 夏亮亮, 门向南, 曾一畔, 张士宏. 面向航空铝合金薄壁深腔构件的冲击液压成形工艺优化[J]. 航空学报, 2021, 42(10): 524831-524831.
[6]	吴爱国, 巩志浩. 基于改进鸽群算法的气动捕获轨道优化[J]. 航空学报, 2020, 41(9): 324292-324292.
[7]	彭珍瑞, 曹明明, 刘满东. 基于加速度频响函数小波分解的模型修正方法[J]. 航空学报, 2020, 41(7): 223548-223548.
[8]	刘一鸣, 盛文, 胡冰, 张磊. 相控阵雷达长时跟踪波束调度与波形优化策略[J]. 航空学报, 2020, 41(3): 323519-323519.
[9]	王超, 高正红, 张伟, 夏露, 黄江涛. 自适应设计空间扩展的高效代理模型气动优化设计方法[J]. 航空学报, 2018, 39(7): 121745-121745.
[10]	赵翔, 李洪双. 基于交叉熵和空间分割的全局可靠性灵敏度分析[J]. 航空学报, 2018, 39(2): 221570-221570.
[11]	楚中毅, 赖咪, 燕少博. 欠驱动指爪机构的被动弹性元件参数优化设计[J]. 航空学报, 2018, 39(1): 421370-421370.
[12]	刘凯, 曹毅, 周睿, 葛姝翌, 丁锐. 二自由度平板折展柔性铰链的分析及优化[J]. 航空学报, 2017, 38(2): 420317-420326.
[13]	张健, 张德虎. 高空长航时太阳能无人机总体设计要点分析[J]. 航空学报, 2016, 37(S1): 1-7.
[14]	赵海龙, 岳珠峰, 刘伟. 矩独立重要性分析的Kriging代理模型方法[J]. 航空学报, 2016, 37(7): 2234-2241.
[15]	宋超, 杨旭东, 宋文萍. 耦合梯度与分级Kriging模型的高效气动优化方法[J]. 航空学报, 2016, 37(7): 2144-2155.