朱惠人, 许都纯, 郭涛, 刘松龄
ZHU Hui-ren, XU Du-chun, GUO Tao, LIU Song-lin
摘要: 采用放大的半圆柱状表面模拟涡轮叶片前缘的形状,对叶片前缘单排及两排圆柱形孔的气膜冷却效率进行了测量。试件表面交错地开有 6排孔,以驻点为起点,位置分别在± 1 5°,± 4 0°及± 60°处,各排孔的孔间距均为 3个孔径,孔轴线与表面在展向及流向的夹角分别为 30°及 90°,孔长与孔径比为 4。主要对比研究了 3种单排气膜孔不同孔排位、3种两排气膜孔不同孔排位及 1种三排气膜孔的布局对孔排下游冷却效率的影响。结果表明 :在同样二次流流量条件下,冷却效果好的单排孔位置依次为 60°,4 0°,1 5°,冷却效果最好的两排孔位置组合为 ( 40°,60°)。结果还表明 :在较大的二次流流量条件下,采用单排孔、两排孔或三排孔冷却方案对孔排下游的冷却效果影响不大;但在较小的二次流流量条件下,从冷却效果看,较好的孔排冷却方案依次为 :三排孔、两排孔及单排孔。实验参数范围是 :主流雷诺数 Re=4 2 0 0 0~ 1 2 70 0 0,平均吹风比 M =0.5~ 2.0