航空学报 > 2015, Vol. 36 Issue (9): 2815-2827   doi: 10.7527/S1000-6893.2015.0172

基于电阻阵列的红外场景生成技术

高辉1, 赵松庆1,2, 吴根水1,2, 陈海燕1, 赵西帅1   

  1. 1. 中国空空导弹研究院 制导控制系统研究所, 洛阳 471009;
    2. 航空制导武器航空科技重点实验室, 洛阳 471009
  • 收稿日期:2015-01-16 修回日期:2015-06-07 出版日期:2015-09-15 发布日期:2015-06-16
  • 通讯作者: 高辉 男, 硕士, 工程师。主要研究方向: 红外目标与环境特性半实物仿真。 Tel: 0379-63383925 E-mail: gaohuialex@163.com E-mail:gaohuialex@163.com
  • 作者简介:赵松庆 男, 硕士, 高级工程师。主要研究方向: 红外目标与环境特性半实物仿真。 Tel: 0379-63383925 E-mail: zsq_5198@sina.com;吴根水 男, 研究员。主要研究方向: 红外制导系统半实物仿真。 Tel: 0379-63383925 E-mail: genshuiwu@163.com;陈海燕 女, 工程师。主要研究方向: 红外目标与环境特性半实物仿真。 Tel: 0379-63383925 E-mail: 36337728@qq.com;赵西帅 男, 硕士, 工程师。主要研究方向: 红外目标与环境特性半实物仿真。 Tel: 0379-63383925 E-mail: 344958762@qq.com

Infrared radiation scene generation technology based on resistor array

GAO Hui1, ZHAO Songqing1,2, WU Genshui1,2, CHEN Haiyan1, ZHAO Xishuai1   

  1. 1. Department of Guidance & Control System, China Airborne Missile Academy, Luoyang 471009, China;
    2. Aviation Key Laboratory of Science and Technology on Airborne Guided Weapons, Luoyang 471009, China
  • Received:2015-01-16 Revised:2015-06-07 Online:2015-09-15 Published:2015-06-16

摘要:

针对红外成像制导半实物仿真试验的需求,研究了红外场景生成技术。主要通过对场景的建模、目标及场景的红外特性分析,开展了基于可见光图像调制生成红外图像技术的研究。同时对飞机、地面背景及红外诱饵干扰的建模技术进行了探讨,完善了红外场景的生成方法。利用该红外场景生成技术为基于电阻阵列的红外图像转换器提供输入信息,驱动电阻阵列产生红外辐射,经热像仪观测,生成的图像细腻、真实度高,为制导半实物仿真试验提供了更为逼真的红外仿真环境。

关键词: 半实物仿真, 红外纹理生成, 红外场景建模, 目标干扰建模, 电阻阵列

Abstract:

According to the requirements of the infrared radiation imaging guidance hardware-in-the-loop simulation test, the technology of infrared radiation image generation was researched. The infrared image generation technology based on visible light modulation method was developed, including scene modeling, infrared radiation character of target and scene analysis. Meanwhile, the airplane, terrain and the infrared decoy modeling technology were discussed, and the method of infrared radiation scene generation was consummated. As the input information of the resistor array, the infrared radiation scene data, which was generated by the technology discussed in the paper, can drive the resistor array generate the infrared radiation scene. The infrared radiation scene that was detected by the infrared radiation camera, was fine and close to the reality, which can provide more accurate environment for infrared radiation imaging guidance hardware-in-the-loop simulation test.

Key words: hardware-in-the-loop simulation, infrared radiation texture generation, infrared radiation scene modeling, target and decoy modeling, resistor array

中图分类号: