Originating from the aviation field in the 1950s, the concept of structural integrity has undergone numerous developments.However, it is currently mainly focused on the operational stage. With the continuous development of technology and the increasing demands, structural integrity has gradually become a general goal throughout the life cycle of structures. This paper discusses the importance and development status of structural integrity as a general goal for the life cycle of structures, pointing out deficiencies in current research, such as the lack of systematic requirements during the preliminary demonstration stage, incomplete quality control during the manufacturing stage, and neglecting the perspective of the service life. To address these issues, this paper proposes frameworks for Structural Manufacturing Integrity Program (SMIP), Structural Storage Integrity Program (SSIP), and Structural Operational Integrity Program (SOIP).An effective way to carry out quality control of equipment is to implement the equipment integrity programs, which should be used in the quality control of the equipment manufacturing phase; the equipment storage integrity programme should be used in the quality control of the equipment storage phase; and the equipment service integrity programme should be used in the quality control of the equipment service phase. The life cycle quality control of equipment is of great significance for the suitability and effectiveness of equipment in service.
HE Yu-Ting
,
ZHANG Tian-Yu
,
ZHANG Teng
. The Construction of Equipment Integrity Programs and Application Strategies[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0
: 1
-0
.
DOI: 10.7527/S1000-6893.2026.33937
[1]崔德刚, 鲍蕊, 张睿, 等. 飞机结构疲劳与结构完整性发展综述[J]. 航空学报, 2021, 42(5): 524394.
CUI D G,BAO R, ZHANG R, et al. Development of aircraft structural fatigue and structural fatigue and structural integrity[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(5): 524394. (in Chinese)
[2]USA Department of Defense. Aircraft Structure Integrity Program (ASIP) [S]. Department of defense standard MIL-STD-1530D (USAF), 2016.
[3]何宇廷, 张腾, 马斌麟. 军用飞机结构作战完整性的基本内涵与评估[J]. 空军工程大学学报（自然科学版）, 2019, 20(5): 1-7.
HE Y T, ZHANG T, MA B L. Basic connotation and evaluation of military aircraft structural battle integrity[J]. Journal of Air Force Engineering University (Natural Science Edition), 2019, 20(5): 1-7. (in Chinese)
[4]何宇廷. 装备的作战完整性初探[J]. 空军工程大学学报（自然科学版）, 2020, 21(1): 1-8.
HE Y T. A study of equipment operational integrity[J]. Journal of Air Force Engineering University (Natural Science Edition), 2020, 21(1): 1-8. (in Chinese)
[5]林晓华. 面向设计-制造-服役全周期的产品质量控制与优化技术及其在大型空分装备中的应用研究[D]. 杭州: 浙江大学, 2012.
LIN X H. Product quality control and optimization technology oriented to design-manufacturing-serving full cycle and application in large air separation equipment[D]. Hangzhou: Zhejiang University, 2012. (in Chinese)
[6]董学军, 王德宝, 路建功等. 航天装备质量工程技术[M]. 北京: 中国宇航出版社, 2022.
DONG X J, WANG D B, LU J G, et al. Engineering technology for aerospace equipment quality[M]. Beijing: China Astronautic Publishing House, 2022.
[7]何宇廷. 飞行器广义生存性及评估方法[J]. 航空学报, 2022, 43(6): 526118.
HE Y T. On the generalized survivability of aircraft and its evaluation method[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(6): 526118. (in Chinese)
[8]何宇廷. 飞行器的修复性及其设计方法 [J]. 空军工程大学学报（自然科学版）, 2019, 20(6): 1-8.
HE Y T. Aircraft recoverability and its design methods[J]. Journal of Air Force Engineering University (Natural Science Edition), 2019, 20(6): 1-8. (in Chinese)
[9]王立群. 航空装备的完整性[J]. 航空学报, 1988, 9(10): 433-439.
WANG Li-qun. Aircraft Equipment Integrity[J]. ACTA Aeronautica ET Astronautica SINICA, 1988, 9(10): 433-439.
[10]何宇廷. 飞行器作战完整性的提出和发展[J]. 航空工程进展, 2022, 13(3): 1-11.
HE Y T. Presentation and development of aerocraft operational integrity[J]. Advances in Aeronautical Science and Engineering, 2022, 13(3): 1-11. (in Chinese)
[11]中国人民解放军总装备部. 装备质量管理术语: GJB 1405A-2006[S]. 北京: 中国人民解放军总装备部, 2006.
The General Equipment Department of PLA. Terms for equipments quality management: GJB 1405A-2006[S]. Beijing: The General Equipment Department of PLA, 2006. (in Chinese)
[12]王灵芝, 祝华远, 刘杨, 等. 航空装备通用质量特性使用评价基础[M]. 北京: 航空工业出版社, 2021.
WANG L Z, ZHU H Y, LIU Y, et al. Evaluation basis of general quality characteristics of aviation equipment[M]. Beijing: Aviation Industry Press, 2021. (in Chinese)
[13]中央军委装备发展部. 装备通用质量特性术语: GJB 451B-2021[S]. 北京: 中央军委装备发展部, 2017.
Central Military Commission Equipment Development Department. General quality characteristics terms for material: GJB 9001C-2017[S]. Beijing: The General Equipment Department of PLA, 2017. (in Chinese)
[14]中央军委装备发展部. 质量管理体系要求: GJB 9001C-2017[S]. 北京: 中央军委装备发展部, 2017.
Central Military Commission Equipment Development Department. Quality management systems requirements: GJB 9001C-2017[S]. Beijing: The General Equipment Department of PLA, 2017. (in Chinese)
[15]祝华远, 李军亮, 贾向军, 等. 航空装备通用质量特性概论[M]. 北京: 航空工业出版社, 2021.
ZHU H Y, LI J L, JIA X J, et al. Introduction to general quality characteristics of aviation equipment[M]. Beijing: Aviation Industry Press, 2021. (in Chinese)
[16]HE Y T, ZHANG T, FAN X H. The effect of PHM technologies on aerocraft operational integrity [C]// Proceedings of the 6th China Aeronautical Science and Technology Conference. Singapore: Springer, 2024.
[17]何宇廷, 张腾, 缑百勇. 基于作战完整性的军用飞机结构强度发展思考[J]. 航空工程进展, 2023, 14(5): 1-7.
HE Y T, ZHANG T, GOU B Y. Opinions on the development of military aircraft structural strength based on aircraft structural operational integrity[J]. Advances in Aeronautical Science and Engineering, 2023, 14(5): 1-7. (in Chinese)
[18]HE Y T, ZHANG T, MA B, et al. Structural Integrity Control Technology Based on Structural Damage Monitoring[C]// ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing. Cham: Springer, 2019.
[19]何宇廷. 装备的作战完整性控制原理[J]. 空军工程大学学报（自然科学版）, 2020, 21(3): 1-5.
HE Y T. On the control theory of equipment operational integrity [J]. Journal of Air Force Engineering University (Natural Science Edition),, 2020, 21(3): 1-5. (in Chinese)
[20]HE Y T, BAO R. On the theory of aerocraft structural operational integrity control[C]// Proceedings of the 31th Symposium of the International Committee on Aeronautical Fatigue and Integrity. Delft: ICAF 2023, 2023.
[21]商云龙, 张洪秀, 王娟娟等. 浅析装备制造过程控制方法与应用 [J]. 陶瓷, 2024, (10): 96-7+164.
SHANG Y L, ZHANG H X, WANG J J. A brief analysis of process control methods and applications in equipment manufacturing [J]. Ceramic, 2024, (10): 96-7+164.
[22]陈豪彪, 王思明, 赖永孙. 装备储存寿命的研究 [J]. 中国新技术新产品, 2019, (03): 16-7.
CHEN H B, WANG S M, LAI Y S. A Study on the Shelf Life of Equipment [J]. New Technologies and Products in China, 2019, (03): 16-7.
[23]何宇廷，张腾，张天宇．基于作战完整性的装备结构质量控制策略[J/OL]．航空学报. https://link.cnki.net/urlid/11.1929.v.20260324.1051.018
HE YT, ZHANG T, ZHANG T Y, et al. Quality control strategy for equipment structure based on operational integrity[J]. Acta Aeronautica et Astronautica Sinica. https://link.cnki.net/urlid/11.1929.v.20260324.1051.018(in Chinese).
CJA