CNC polishing is the key technology to realize the automation and high efficiency of the surface finishing of the blisk. And the polishing path planning has a significant influence on the surface quality. When polishing the free-form surface, the deviation of radial compression quantity along the contact curve of abrasive cloth wheel leads to poor consistency of material removal quantity. Based on the geometric analysis of the extrusion deformation of the abrasive cloth wheel, a compression deformation distribution model along the contact curve on the free-form surface was established. The optimization model of tool orientation at one cutter location was established, and the improved Partical Swarm Optimization (PSO) was used to solve the problem. The objective function of optimization was evaluated by minimizing the maximum compression deviation along the contact curve. Then the curves of adjacent cutter contact trajectories are calculated. Finally, the correctness and the effectiveness of the proposed method were verified by experiments. The results show that the contour and roughness of the polished area are improved significantly.
WANG Zhiwei
,
LIN Xiaojun
,
SHI Yaoyao
,
GAO Yuan
,
ZHANG Yun
. A polishing path planning method for blisk with abrasive cloth wheel based on compression deviation constraint[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020
, 41(2)
: 623330
-623330
.
DOI: 10.7527/S1000-6893.2019.23330
[1] 黄云, 肖贵坚, 邹莱. 整体叶盘抛光技术的研究现状及发展趋势[J]. 航空学报, 2016, 37(7):2045-2064. HUANG Y, XIAO G J, ZOU L. Current situation and development trend of polishing technology for blisk[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(7):2045-2064(in Chinese).
[2] REN X, KUHLENKÖTTER B, MÜLLER H. Simulation and verification of belt grinding with industrial robots[J]. International Journal of Machine Tools & Manufacture, 2006, 46(7-8):708-716.
[3] REN X, CABARAVDIC M, ZHANG X, et al. A local process model for simulation of robotic belt grinding[J]. International Journal of Machine Tools & Manufacture, 2007, 47(6):962-970.
[4] SUN Y Q, GIBLIN D J, KAZEROUNIAN K. Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniques[J]. Robotics and Computer-Integrated Manufacturing, 2009, 25(1):204-210.
[5] XIAO G J, HUANG Y. Equivalent self-adaptive belt grinding for the real-R edge of an aero-engine precision-forged blade[J]. The International Journal of Advanced Manufacturing Technology, 2016, 83(9-12):1697-1706.
[6] XIAO G J, HUANG Y, FEI Y. On-machine contact measurement for the main-push propeller blade with belt grinding[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(5-8):1713-1723.
[7] XIAO G J, HUANG Y. Constant-load adaptive belt polishing of the weak-rigidity blisk blade[J].The International Journal of Advanced Manufacturing Technology, 2015, 78(9-12):1473-1484.
[8] 蔺小军, 杨艳, 吴广, 等. 面向叶片型面的五轴联动柔性数控砂带抛光技术[J]. 航空学报, 2015, 36(6):2074-2082. LIN X J, YANG Y, WU G, et al. Flexible polishing technology of five-axis NC abrasive belt for blade surface[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(6):2074-2082(in Chinese).
[9] YANG J H, ZHANG D H, WU B H,et al. A path planning method for error region grinding of aero-engine blades with free-form surface[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(1-4):717-728.
[10] 段继豪, 史耀耀, 李小彪, 等. 整体叶盘柔性磨头自适应抛光实现方法[J]. 航空学报, 2011, 32(5):934-940. DUAN J H, SHI Y Y, LI X B, et al. Adaptive polishing for blisk by flexible grinding head[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(5):934-940(in Chinese).
[11] 段继豪, 史耀耀, 张军锋, 等. 航空发动机叶片柔性抛光技术[J]. 航空学报,2012, 33(3):573-578. DUAN J H, SHI Y Y, ZHANG J F,et al. Flexible polishing technology of blade of aviation engine[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(3):573-578(in Chinese).
[12] ZHAO P B, SHI Y Y. Posture adaptive control of the flexible grinding head for blisk manufacturing[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(9-12):1989-2001.
[13] ZHAO P B, SHI Y Y. Adaptive sliding mode control of the A-axis used for blisk manufacturing[J]. Chinese Journal of Aeronautics, 2014, 27(3):708-715.
[14] 蔺小军, 杨阔, 吴广, 等. 开式整体叶盘叶片型面数控抛光编程技术[J]. 计算机集成制造系统, 2014, 20(2):379-384. LIN X J, YANG K, WU G, et al. NC polishing programming technology of open blisk blade surface[J]. Computer Integrated Manufacturing Systems, 2014, 20(2):379-384(in Chinese).
[15] ZHAO T, SHI Y Y, LIN X J, et al. Surface roughness prediction and parameters optimization in grinding and polishing process for IBR of aero-engine[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74:653-663.
[16] FENG D, SUN Y, DU H. Investigations on the automatic precision polishing of curved surfaces using a five-axis machining centre[J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(9-12):1625-1637.
[17] RAO Z M, GUO B, ZHANG Q L, et al. Form error compensation in soft wheel polishing by contact force optimization[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(1-4):1197-1207.
[18] 蔺小军, 樊宁静, 郭研, 等. 非可展直纹面侧铣刀位轨迹优化算法[J]. 机械工程学报, 2014, 50(9):136-141. LIN X J, FAN N J, GUO Y, et al. Undevelopable ruled surface flank milling cutter path optimization algorithm[J]. Journal of Mechanical Engineering, 2014, 50(9):136-141(in Chinese).
[19] 阎长罡, 刘宇, 崔云先, 等. 圆锥刀侧铣非可展直纹面刀轴轨迹规划的特征线方法[J]. 机械工程学报, 2015, 51(10):206-212. YAN C G, LIU Y, CUI Y X, et al. Feature line method of tool axis trajectory planning for non-developable ruled surface flank milling with conical tools[J]. Journal of Mechanical Engineering, 2015,51(10):206-212(in Chinese).
[20] ZHU L M, ZHENG G, DING H, et al. Global optimization of tool path for five-axis flank milling with a conical cuter[J]. Computer-Aided Design, 2010, 42(10):903-910.
[21] HSIEH H, CHU C. Optimization of tool path planning in5-axis flank milling of ruled surfaces with improved PSO[J]. International Journal of Precision Engineering and Manufacturing, 2012, 13(1):77-84.
CJA