A new concept named two-dimensional fuel pump is proposed, and the advantages are illustrated. To investigate the structural flow ripple of the fuel pump, a simulation model is established in the AMESIM program, and experiments are conducted to verify the efficiency of the pump. The advantages of the axial piston pump in the fuel system are stated through a comparison with the gear pump. The two-dimensional fuel pump is proposed to overcome those structural problems that cannot be avoided in the traditional axial piston pump. The advantages of the two-dimensional fuel pump are illustrated through an explanation of its structure and working principle. The advantages include balanced structural force, high working efficiency, zero direct sliding friction pair, and zero structural flow ripple. To illustrate the advantage of zero structural flow ripple, the simulation analysis and experimental verification are both adopted, verifying that the two-dimensional fuel pump can avoid the structural flow ripple.
JIN Dingcan
,
RUAN Jian
. Design and research of two-dimensional fuel pump[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019
, 40(5)
: 422730
-422730
.
DOI: 10.7527/S1000-6893.2019.22730
[1] 张绍基. 航空发动机燃油与控制系统的研究与展望[J]. 航空发动机, 2003, 29(3):1-5. ZHANG S J. Recent research and development of the fuel and control systems in an aeroengine[J]. Aeroengine, 2003, 29(3):1-5(in Chinese).
[2] 刘尚勤. 离心泵用作航空发动机主燃油泵研究[J]. 航空发动机, 2006, 32(2):43-45. LIU S Q. Investigation of centrifugal pump used as aeroengine main fuel pump[J]. Aeroengine, 2006, 32(2):43-45(in Chinese).
[3] 钱一凡. 面向航空电动燃油泵的齿轮泵研究[D]. 南京:南京航空航天大学, 2016:1-20. QIAN Y F. Research on gear pump for aviation electric fuel pump[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2016:1-20(in Chinese).
[4] 张绍基. 航空发动机控制系统的研发与展望[J]. 航空动力学报, 2004, 19(3):375-382. ZHANG S J. A review of aeroengine control system[J]. Journal of Aerospace Power, 2004, 19(3):375-382(in Chinese).
[5] 柳荫. 某型高压燃油泵的设计研究[D]. 南京:南京理工大学, 2007. LIU Y. Design and research of some type of high pres sure fuel pump[D]. Nanjing:Nanjing University of Science and Technology, 2007(in Chinese).
[6] 朴英, 张绍基. 军用航空发动机加力控制系统的研究和发展[J]. 推进技术, 2001, 22(2):89-91. PIAO Y, ZHANG S J. Research and development of afterburner control system for military aeroengine[J]. Journal of Propulsion Technology, 2001, 22(2):89-91(in Chinese).
[7] 唐令力, 吕立功. 轴向柱塞泵摩擦副磨损及改进探[J]. 通用机械, 2003(6):39-42. TANG L L, LYU L G. Discussion on the wear problem and improvement of friction pairs in axial piston pump[J]. General Machinery, 2003(6):39-42(in Chinese).
[8] 马龙, 贾继伟, 常量. 航空发动机加力控制系统的研究与发展[C]. 吉林省第七届科学技术学术年会, 2012. MA L, JIA J W, CHANG L. Research and development of aero-engine power control system[C]//The 7th annual scientific and technological conference of Jilin province, 2012(in Chinese).
[9] MANRING N D, ZHANG Y H. The improved volumetric-efficiency of an axial-piston pump utilizing a trapped-volume design[J]. Journal of Dynamic Systems Measurement & Control, 123(3):479-487.
[10] MANRING N D, MEHTA V S, NELSON B E, et al. Scaling the speed limitations for axial-piston swash-plate type hydrostatic machines[J]. Journal of Dynamic Systems Measurement & Control, 136(3):031004.
[11] 侯波. 斜轴式轴向柱塞泵缸体扭转振动研究[J]. 安徽理工大学学报(自然科学版), 1992(12):3-4. HOU B. The analysis for the twisting vibration of a cylinder in the axial plunger pump with an oblique axis[J]. Journal of Anhui University of Science and Technology (Natural Science), 1992(12):3-4(in Chinese).
[12] HONG Y S, DOH Y H. Analysis on the friction losses of a bent-axis type hydraulic piston pump[J]. KSME International Journal, 18(9):1668-1679.
[13] 林菁. 斜轴式轴向柱塞泵干涉分析计算[J]. 机械设计与研究, 2015(3):132-134. LIN J. Analysis and calculation of interference for hydraulic oblique piston pump[J]. Machine Design and Research, 2015(3):132-134(in Chinese).
[14] 林硕, 苑士华, 刘洪. 考虑油膜非均匀性的滑靴润滑特性研究[J]. 北京理工大学学报, 2014, 34(4):358-362 LIN S, YUAN S H, LIU H. Analysis on lubrication characteristics of slipper bearing considering un-uniform gap[J]. Transactions of Beijing Institute of Technology, 2014, 34(4):358-362(in Chinese).
[15] 马利云, 田毛提, 宋要斌, 等. 柱塞泵摩擦副受力分析与可靠性研究[J]. 现代制造技术与装备, 2016(1):8-10. MA L Y, TIAN M T, SONG Y B, et al. The force analysis and reliability study on friction pair for ram-type pump[J]. Modern Manufacturing Technology & Equipment, 2016(1):8-10(in Chinese).
[16] PELOSI M, IVANTYSYNOVA M. The impact of axial piston machines mechanical parts constraint conditions on the thermo-elastohydrodynamic lubrication analysis of the fluid film interfaces[J]. International Journal of Fluid Power, 2013, 14(3):35-51.
[17] TURNER A J, RAMSAY K, CLARK R E, et al. Development of high force electromechanical linear actuator for shift-by-wire automated manual transmissions[C]. SAE 2006 World Congress & Exhibition, 2006.
[18] 邓海顺, 王传礼, 张立祥. 平衡式两排轴向柱塞泵流量脉动研究[J]. 农业机械学报, 2014, 45(5):305-309. DENG H S, WANG C L, ZHANG L X. Study on flow ripple of balanced two-ring axial piston pump[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(5):305-309(in Chinese).
[19] MANRING N D, MEHTA V S, NELSON B E, et al. Increasing the power density for axial-piston swash-plate type hydrostatic machines[J]. Journal of Mechanical Design, 135(7):071002.
[20] XU B, YE S, ZHANG J, et al. Flow ripple reduction of an axial piston pump by a combination of cross-angle and pressure relief grooves:Analysis and optimization[J]. Journal of Mechanical Science & Technology, 2016, 30(6):2531-2545.
[21] 阮健, 李进园, 金丁灿, 等. 二维(2D)柱塞泵原理性验证研究[J]. 浙江工业大学学报, 2017, 45(3):264-269. RUAN J, LI J Y, JIN D C, et al. Research and feasibility verification of two-dimensional (2D) piston pump[J]. Journal of Zhejiang University of Technology, 2017, 45(3):264-269(in Chinese).
[22] 阮健, 金丁灿, 申屠胜男, 等. 二维(2D)双联泵原理性验证研究[J].液压气动与密封, 2017(11):1-5. RUAN J, JIN D C, SHENGTU S N, et al. Research and feasibility verification of two-dimensional (2D) tandem pump[J]. Chinese Hydraulics & Pneumatics, 2017(11):1-5(in Chinese).
[23] 丰章俊, 阮健. 双联式燃油泵的结构设计及其实验研究[J]. 液压气动与密封, 2018(1):25-27. FENG Z J, RUAN J. Structural design and experimental study of duplex fuel pump[J]. Hydraulics Pneumatics & Seals, 2018(1):25-27(in Chinese).
CJA