[1] 曹春晓. 一代材料技术, 一代大型飞机[J]. 航空学报, 2008, 29(3):701-706. CAO C X. One generation of material technology, one generation of large aircraft[J]. Acta Aeronautica et Astronautica Sinca, 2008, 29(3):701-706(in Chinese).[2] 杨健. 钛合金在飞机上的应用[J]. 航空制造技术, 2006(11):41-43. YANG J. Application of titanium alloy in aircraft[J]. Aeronautical Manufacturing Technology, 2006(11):41-43(in Chinese).[3] 郭良刚, 杨合, 邸伟佳, 等. TC4钛合金薄壁带筋锥形环辗轧充填规律[J]. 航空学报, 2015, 36(8):2798-2806. GUO L G, YANG H, DI W J, et al. Filling rules in thin-walled and ribbed conical ring rolling for TC4 titanium alloy[J]. Acta Aeronautica et Astronautica Sinca, 2015,36(8):2798-2806(in Chinese).[4] OKAZAKI K, KAGAWA M, CONRAD H. An evaluation of the contributions of skin, pinch and heating effects to the electroplastic effect in titatnium[J]. Materials Science & Engineering, 1980, 45(2):109-116.[5] TROITSKⅡ O A, LIKHTMAN V I. The anisotropy of the action of electron and γ radiation on the deformation of zinc single crystals in the brittle state[J]. Soviet Physics Doklady, 1963, 8:332-334.[6] TROITSKⅡ O A. The electroplastic effect in metals[J]. Strength of Materials, 1984, 16(2):277-281.[7] ROH J H, SEO J J, HONG S T, et al. The mechanical behavior of 5052-H32 aluminum alloys under a pulsed electric current[J]. International Journal of Plasticity, 2014, 58(2014):84-99.[8] SPITSYN V I, TROITSKⅡ O A. Simulation of the thermal and pinch effects of pulsed current on the plastic deformation of a metal[J]. Soviet Physics Doklady, 1975, 20:132-134.[9] TROITSKⅡ O A, SPITSYN V I, SOKOLOV N V, et al. Electroplastic drawing of stainless steel[J]. Soviet Physics Doklady, 1977, 22:1082-1085.[10] STASHENKO V I, TROITSKⅡ O A, SPITSYN V I.Action of current pulses on zinc single crystals during creep[J]. Physica Status Solidi, 1983, 79(2):549-557.[11] YE X, TSE Z T H, TANG G, et al. Effect of electropulsing treatment on microstructure and mechanical properties of cold-rolled pure titanium strips[J]. Journal of Materials Processing Technology, 2015, 22(2015):27-32.[12] 宋辉. 脉冲电流处理对钛合金板材组织和性能影响的研究[D]. 哈尔滨:哈尔滨工业大学, 2009:28-30. SONG H. Study on the effects of electropulsing on microstructures and properties of titanium alloys sheet[D]. Harbin:Harbin Institute of Technology, 2009:28-30(in Chinese).[13] YE X, LI X, SONG G, et al. Effect of recovering damage and improving microstructure in the titanium alloy strip under high-energy electropulses[J]. Journal of Alloys & Compounds, 2014, 616(2014):173-183.[14] QIAO S, LI Y, LI Y, et al. Damagehealing of aluminum alloys by DC. electropulsing and evaluation by resistance[J]. Rare Metal Materials & Engineering, 2009, 38(4):570-573.[15] SPRECHER A F, MANNAN S L, CONRAD H. On the mechanisms for the electroplastic effect in metals[J]. Acta Metallurgica, 1986, 34(7):1145-1162.[16] TAO Z, YANG H, LI H,et al. Quasi-static tensile behavior of large-diameter thin-walled Ti-6Al-4V tubes at elevated temperature[J]. Chinese Journal of Aeronautics, 2016, 29(2):542-553.[17] WANG X, XU J, SHAN D, et al. Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension[J]. International Journal of Plasticity, 2016, 85(2016):230-257.[18] KIM M S, VINH N T, YU H H, et al. Effect of electric current density on the mechanical property of advanced high strength steels under quasi-static tensile loads[J]. International Journal of Precision Engineering and Manufacturing, 2014, 15(6):1207-1213.[19] SALANDRO W A, BUNGET C,MEARS L. Modeling and quantification of the electroplastic effect when bending stainless steel sheet metal[C]//SALANDRO W A. ASME 2010 International Manufacturing Science and Engineering Conference. Wisconsin, SC:Clemson University, 2010:581-590.[20] ROSS C D, KRONENBERGER T J, ROTH J T. Effect of dc on the formability of Ti-6Al-4V[J]. Journal of Engineering Materials & Technology, 2009, 131(3):1-11.[21] PERKINS T A, KRONENBERGER T J, ROTH J T. Metallic forging using electrical flow as an alternative to warm/hot working[J]. Journal of Manufacturing Science & Engineering, 2007, 129(1):84-94.[22] SALANDRO W A, JONES J J, BUNGET C, et al.Electrically assisted forming:Modeling and control[M]. Springer International Publishing, 2015:23-36.[23] XIE H, DONG X, LIU K, et al. Experimental investigation on electroplastic effect of DP980 advanced high strength steel[J]. Materials Science & Engineering:A, 2015, 637(2015):23-28.[24] MAGARGEE J. Characterization of flow stress for commercially pure titanium subjected to electrically assisted deformation[J]. Journal of Engineering Materials & Technology, 2013, 135(4):1-10.[25] GOLDMAN P D, MOTOWIDLO L R, GALLIGAN J M.The absence of an electroplastic effect in lead at 4.2K[J]. Scripta Metallurgica, 1981, 15(4):353-356.[26] SPRECHER A F, MANNAN S L, CONRAD H. On the temperature rise associated with the electroplastic effect in titanium[J]. Scripta Metallurgica, 1983, 17(6):769-772.[27] OKAZAKI K, KAGAWA M, CONRAD H.A study of the electroplastic effect in metals[J]. Scripta Metallurgica, 1978, 12(11):1063-1068.[28] OKAZAKI K, KAGAWA M, CONRAD H. Additional results on the electroplastic effect in metals[J]. Scripta Metallurgica, 1979, 13(4):277-280.[29] OKAZAKI K, KAGAWA M, CONRAD H. Effects of strain rate, temperature and interstitial content on the electroplastic effect in titanium[J]. Scripta Metallurgica, 1979, 13(6):473-477.[30] SALANDRO W A, BUNGET C J, MEARS L.A thermal-based approach for determining electroplastic characteristics[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2012, 226(5):775-788.[31] CONRAD H, GUO Z, SPRECHER A F.Effects of electropulse duration and frequency on grain growth in Cu[J]. Scripta Metallurgica et Materialia, 1990, 24(2):359-362.[32] KRAVCHENKO V Y.Effect of directed electron beam on moving dislocations[J]. Soviet Physics JETP, 1967, 24:1135-1142.[33] 刘渤然, 张彩碚, 赖祖涵. 冷轧态Al-Li-Cu-Mg-Zr合金在脉冲电流作用下超塑形变中的位错形态[J]. 材料研究学报, 2000, 14(2):218-220. LIU B R, ZHANG C P, LAI Z H. Dislocation configurations in cold rolled Al-Li-Cu-Mg-Zr superplastic alloy under electropulsing[J]. Chinese Journal of Materials Research, 2000, 14(2):218-220(in Chinese).[34] GARAY J E, GLADE S C,ANSELMI-TAMBURINI U, et al. Electric current enhanced defect mobility in Ni3Ti intermetallics[J]. Applied Physics Letters, 2004, 85(4):573-575.[35] GALLIGAN J M, LIN T H, PANG C S.Electron-dislocation interaction in copper[J]. Physical Review Letters, 1977, 38(38):405-407.[36] MOLOTSKⅡ M, FLEUROV V V.Magnetic effects in electroplasticity of metals[J]. Physical Review B:Condensed Matter, 1995, 52(22):15829-15834.[37] 李桂荣, 王宏明, 李沛思,等. 磁致塑性效应下的位错动力学机制[J]. 物理学报, 2015, 64(14):337-346. LI G R, WANG H M, LI P S, et al. Mechanism of dislocation kinetics under magnetoplastic effect[J]. Acta Physica Sinica, 2015, 64(14):337-346(in Chinese).[38] 王宏明, 朱弋, 李桂荣, 等. 强磁与应力场耦合作用下AZ31镁合金塑性变形行为[J]. 物理学报, 2016, 65(14):191-201. WANG H M, ZHU G, LI G R, et al. Plasticity and microstructure of AZ31 magnesium alloy under coupling action of high pulsed magnetic field and external stress[J]. Acta Physica Sinica, 2016, 65(14):191-201(in Chinese).[39] GUO L, FAN X, YU G, et al. Microstructure control techniques in primary hotworking of titanium alloy bars:A review[J]. Chinese Journal of Aeronautics, 2016, 29(1):30-40.[40] LIU K, DONG X, XIE H,et al. Influence of pulsed current on deformation mechanism of AZ31B sheets during tension[J]. Journal of Alloys & Compounds, 2016, 676(2016):106-112.[41] LIU K, DONG X, XIE H,et al. Effect of pulsed current on the deformation behavior of AZ31B magnesium alloy[J]. Materials Science & Engineering:A, 2015, 623(2015):97-103.[42] CONRAD H.Effects of electric current on solid state phase transformations in metals[J]. Materials Science & Engineering:A, 2000, 287(2):227-237.[43] XU X, ZHAO Y, MA B,et al. Rapid grain refinement of 2024 Al alloy through recrystallization induced by electropulsing[J]. Materials Science & Engineering:A, 2014, 612(2014):223-226.[44] SONG H, WANG Z J.Grain refinement by means of phase transformation and recrystallization induced by electropulsing[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(21):353-357.[45] ZHOU Y, ZHANG W, WANG B,et al. Grain refinement and formation of ultrafine-grained microstructure in a low-carbon steel under electropulsing[J]. Journ al of Materials Research, 2002, 17(8):2105-2111.[46] 毛卫民. 金属的再结晶与晶粒长大[M]. 北京:冶金工业出版社, 1994:56-57. MAO W M. Recrystallization and grain growth of metals[M]. Beijing:Metallurgy Industry Press, 1994:56-57(in Chinese).[47] YE X, TSE Z T H, TANG G, et al. Influence of electropulsing treatment on microstructure and mechanical properties of Ti-6Al-4V alloy strip with lamellar microstructure[J]. Materials Science & Engineering:A, 2014, 622(2014):1500-1512.[48] YE X, TSE Z T H, TANG G. Mechanical properties and tensile fracture of Ti-Al-V alloy strip under electropulsing induced phase change[J]. Journal of Materials Research, 2014, 30(2):206-223.[49] LI X, WANG S, ZHAO S, et al. Effect of pulse current on the tensile deformation of SUS304 stainless steel[J]. Journal of Materials Engineering & Performance, 2015, 24(12):5065-5070.[50] 马炳东. 脉冲电流对高强度钢组织与力学性能的影响及数值模拟分析[D]. 吉林:吉林大学, 2014:105-107. MA B D. Effects of electropulsing on the microstructure and mechanical properties of the high strength steels along with the numerical simulation analysis[D]. Jilin:Jilin University, 2014:105-107(in Chinese).[51] MA B, ZHAO Y, MA J, et al. Formation of local nanocrystalline structure in a boron steel induced by electropulsing[J]. Journal of Alloys & Compounds, 2013, 549(2013):77-81.[52] 李国栋. 高密度电脉冲处理对镍基高温合金组织及性能的影响[D]. 沈阳:东北大学, 2008:42-44. LI G D. Effects of high density pulse current on microstrueture and meehanieal property of Niekel-base superalloy[D]. Shenyang:Northeastern University, 2008:42-44(in Chinese).[53] WU W, WANG Y, WANG J, et al. Effect of electrical pulse on the precipitates and material strength of 2024 aluminum alloy[J]. Materials Science & Engineering:A, 2014, 608(2014):190-198.[54] ZHAN L, MA Z, ZHANG J, et al. Stress relaxation ageing behaviour and constitutive modelling of a 2219 aluminium alloy under the effect of an electric pulse[J]. Journal of Alloys & Compounds, 2016, 679(2016):316-323.[55] LIU Y, HUANG M, MA Z, et al. Influence of the low-density pulse current on the ageing behavior of AA2219 aluminum alloy[J]. Journal of Alloys & Compounds, 2016, 673(2016):358-363.[56] 武伟超. 电脉冲对2024铝合金力学性能及微观组织影响研究[D]. 西安:西北工业大学, 2015:67-72. WU W C. Effect of electrical pulse processing on the microstructures and material properties of 2024 aluminum alloy[D]. Xi'an:Northwestern Polytechnical University, 2015:67-72(in Chinese).[57] KIM M J, LEE M G,HARIHARAN K, et al. Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension[J]. International Journal of Plasticity, 2016:1-23.[58] SONG H, WANG Z J.Microcrack healing and local recrystallization in pre-deformed sheet by high density electropulsing[J]. Materials Science & Engineering:A, 2008, 490(2008):1-6.[59] CONRAD H, SPRECHER A F, CAO W D, et al. Electroplasticity-the effect of electricity on the mechanical properties of metals[J]. JOM, 1990, 42(42):28-33.[60] CONRAD H, WHITE J, CAO W D, et al. Effect of electric current pulses on fatigue characteristics of polycrystalline copper[J]. Materials Science & Engineering:A, 1991, 145(1):1-12.[61] ZHOU Y, GUO J, GAO M,et al. Crack healing in a steel by using electropulsing technique[J]. Materials Letters, 2004, 58(11):1732-1736.[62] SONG H, WANG Z J. Effect of electropulsing on dislocation mobility of titanium sheet[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(7):1599-1605.[63] NGUYEN-TRAN H D, OH H S, HONG S T, et al. A review of electrically-assisted manufacturing[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2015, 2(4):365-376.[64] 唐国翌, 郑明新, 朱永华, 等. 电塑性加工技术及其工程应用[J]. 钢铁, 1998, 33(9):35-37. TANG G Y, ZHENG X M, ZHU Y H, et al. Electroplastic effect and its engineering application[J]. Iron & Steel, 1998, 33(9):35-37(in Chinese).[65] 宋令慧, 王守仁, 赵宰炯. 连铸连轧镁合金AZ41微观结构与摩擦磨损性能[J]. 航空学报, 2014, 35(6):1733-1739. SONG L H, WANG S R, ZHAO Z J. Microstructure and friction wear properties of twin-roll casting magnesium alloy AZ41[J]. Acta Aeronautica et Astronautica Sinca, 2014, 35(6):1733-1739(in Chinese).[66] 唐国翌, 张锦, 闫允杰, 等. 电塑性加工对钢丝的摩擦学特性和表面质量的影响[J]. 钢铁, 2001, 36(3):49-51. TANG G Y, ZHANG J, YAN Y J, et al. Analysis of effect of electro-plastic wire-drawing on friction and surface morphology of the wire[J]. Iron & Steel, 2001, 36(3):49-51(in Chinese).[67] ZIMNIAK Z, RADKIEWICZ G. The electroplastic effect in the cold-drawing of copper wires for the automotive industry[J]. Archives of Civil & Mechanical Engineering, 2008, 8(8):173-179.[68] 姚可夫, 余鹏, 郑明新, 等. HOCr17Ni6Mn3钢丝电塑性拉拔的研究[J]. 金属学报, 2000, 36(6):630-633. YAO K F, YU P, ZHENG M X, et al. Research on wire-drawing of a HOCr17Ni6Mn3 steel with high-density current pulses[J]. Acta Metallurgica Sinica, 2000, 36(6):630-633(in Chinese).[69] 周岩. TC4钛合金电塑性拉拔变形行为及机理[D]. 大连:大连理工大学, 2013:52-60. ZHOU Y. Deformation behaviour and its mechanism of TC4 during electroplastic drawing[J]. Dalian:Dalian University of Technology, 2013:52-60(in Chinese).[70] 李大龙, 于恩林. 电塑性拔丝技术及设备研制[J]. 机械设计与制造, 2014(6):112-114. LI D L, YU E L. Research on electroplastic drawing technology and equipment[J]. Machinery Design & Manufacture, 2014(6):112-114(in Chinese).[71] XU Z H, TANG G Y, TIAN S Q,et al. Research of electroplastic rolling of AZ31 Mg alloy strip[J]. Journal of Materials Processing Technology, 2007, 182(1):128-133.[72] LI X P, TANG G Y, KUANG J, et al. Effect of current frequency on the mechanical properties, microstructure and texture evolution in AZ31 magnesium alloy strips during electroplastic rolling[J]. Materials Science & Engineering:A, 2014, 612(2014):406-413.[73] LI H, HU X, YANG H, et al. Anisotropic and asymmetrical yielding and its distorted evolution:modeling and applications[J]. International Journal of Plasticity, 2016, 82(2016):127-158.[74] 叶肖鑫. 高能电脉冲对生物医用钛合金制备及性能影响的研究[D]. 北京:清华大学, 2015:31-33. YE X X. The effects of high-energy electropulsing on the preparation and properteis of biomedical titanium alloy[D]. Beijing:Tsinghua University, 2015:31-33(in Chinese).[75] LU Y, QU T, PAN Z, et al. The influence of electroplastic rolling on the mechanical deformation and phase evolution of Bi-2223/Ag tapes[J]. Journal of Materials Science, 2010, 45(13):3514-3519.[76] STOLYAROV V V. Deformability and nanostructuring of TiNi shape-memory alloys during electroplastic rolling[J]. Materials Science & Engineering:A, 2009, 503(2009):18-20.[77] XIE H, DONG X, AI Z, et al. Experimental investigation on electrically assisted cylindrical deep drawing of AZ31B magnesium alloy sheet[J]. International Journal of Advanced Manufacturing Technology, 2016, 86(1):1063-1069.[78] 毛育青, 柯黎明, 刘奋成, 等. 铝合金厚板FSW焊缝成形及金属流动行为分析[J]. 航空学报, 2016, 37(11):3546-3553. MAO Y Q, KE L M, LIU F C, et al. Weld formation and material flow behavior in FSW thick aluminum alloy plates[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(11):3546-3553(in Chinese).[79] LONG X, KHANNA S K. Modelling of electrically enhanced friction stir welding process using finite element method[J]. Science & Technology of Welding & Joining, 2005, 10(4):482-487.[80] POTLURI H, JONES J J, MEARS L. Comparison of electrically-assisted and conventional friction stir welding processes by feed force and torque[C]//POTLURI H. ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the North American Manufacturing Research Conference. Wisconsin, SC:Clemson University, 2013:1-10.[81] SHEN Y,YU H P,RUAN X Y.Discussion and prediction on decreasing flow stress scale effect[J].Transactions of Nonferrous Metals Society of China, 2006, 16(1):132-136.[82] MAI J, PENG L, LAI X, et al. Electrical-assisted embossing process for fabrication of micro-channels on 316L stainless steel plate[J]. Journal of Materials Processing Technology, 2013, 213(2):314-321.[83] WANG X, XU J, JIANG Z, et al. Size effects on flow stress behavior during electrically-assisted micro-tension in a magnesium alloy AZ31[J]. Materials Science & Engineering:A, 2016, 659(2016):215-224.[84] FAN G, GAO L, HUSSAIN G, et al. Electric hot incremental forming:A novel technique[J]. International Journal of Machine Tools & Manufacture, 2008, 48(15):1688-1692.[85] SHI X, GAO L, KHALATBARI H,et al. Electric hot incremental forming of low carbon steel sheet:accuracy improvement[J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(1):241-247.[86] CHAO L, HE Y, LI H, et al. Dependence of creep age formability on initial temper of an Al-Zn-Mg-Cu alloy[J]. Chinese Journal of Aeronautics, 2016, 29(5):1445-1454.
CJA