HUANG Yun , XIAO Guijian , ZOU Lai . Current situation and development trend of polishing technology for blisk[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016 , 37(7) : 2045 -2064 . DOI: 10.7527/S1000-6893.2016.0055

[1] 王增强. 先进航空发动机关键制造技术[J]. 航空制造技术, 2015(22):34-38. WANG Z Q. Key manufacturing technology of advanced areoengine[J]. Aeronautical Manufacturing Technology, 2015(22):34-38(in Chinese).
[2] 史耀耀, 段继豪, 张军峰, 等. 整体叶盘制造工艺技术综述[J]. 航空制造技术, 2012(3):26-31. SHI Y Y, DUAN J H, ZHANG J F, et al. Blisk disc manufacturing process technology[J]. Aeronautical Manufacturing Technology, 2012(3):26-31(in Chinese).
[3] 张海艳, 张连锋. 航空发动机整体叶盘制造技术国内外发展概述[J]. 航空制造技术, 2013(23-24):38-41. ZHANG H Y, ZHANG L F. Development overview of aeroengine integral blisk and its manufacturing technology at home and abroad[J]. Aeronautical Manufacturing Technology, 2013(23-24):38-41(in Chinese).
[4] ZHAN H, ZHAO W, WANG G. Manufacturing turbine blisks[J]. Aircraft Engineering and Aerospace Technology, 2000, 72(3):247-251.
[5] SECHERLING A, LOOF C. Method for manufacturing blisks:US20110308966A1[P]. 2011-12-22.
[6] 程荣凯. 整体叶盘型面磨削加工工艺研究[D]. 重庆:重庆大学, 2014:1-2. CHEN R K. Research on the grinding process of the blisk moulding surface[D]. Chongqing:Chongqing University, 2014:1-2(in Chinese).
[7] XIAO G J, HUANG Y. Equivalent self-adaptive belt grinding for the real-R edge of an aero-engine precision-forged blade[J]. The International Journal of Advanced Manufacturing Technology, 2016, 83(9-12):1697-1706.
[8] 刘召洋. 整体叶盘叶片型面砂带磨削路径规划与机床空间轴系分析[D]. 重庆:重庆大学,2014:18-19. LIU Z Y. Path planning for blisk blade surface belt grinding and spatial axis analysis[D]. Chongqing:Chongqing University, 2014:18-19(in Chinese).
[9] AXINTE D A, KWONG J, KONG M C. Workpiece surface integrity of Ti-6-4 heat-resistant alloy when employing different polishing methods[J]. Journal of Materials Processing Technology, 2009, 209(4):1843-1852.
[10] AXINTE D A, KRITMANOROT M, AXINTE M, et al. Investigations on belt polishing of heat-resistant titanium alloys[J]. Journal of Materials Processing Technology, 2005, 166(3):398-404.
[11] ULUTAN D, OZEL T. Machining induced surface integrity in titanium and nickel alloys:A review[J]. International Journal of Machine Tools & Manufacture, 2011, 51(3):250-280.
[12] XIAO G J, HUANG Y, CHEN G L, et al. Investigations on belt grinding of GH4169 nickl-based superalloy[J]. Advanced Materials Research, 2014, 1017:15-20.
[13] XIAO G J, HUANG Y, YANG Y H, et al. Workpiece surface integrity of GH4169 nickel-based superalloy when employing abrasive belt grinding method[J]. Advanced Materials Research, 2014, 936:1252-1257.
[14] 罗皎, 李淼泉. 高性能整体叶盘制造技术研究进展[J]. 精密成形工程, 2015, 7(6):1-7,24. LUO J, LI M Q. A review on the manufacturing technology of high property blisk[J]. Journal of Netshape Forming Engineering, 2015, 7(6):1-7, 24(in Chinese).
[15] 张少平, 李冠达, 安利平, 等. 纤维增强钛基复合材料整体叶环设计技术[J]. 燃气涡轮试验与研究, 2015, 28(1):45-48,53. ZHANG S P, LI G D, AN L P, et al. Design technology for fiber reinforced TMC bling[J]. Gas Turbine Experiment and Research, 2015, 28(1):45-48,53(in Chinese).
[16] 宋桂珍. 磨料流加工技术的理论分析和实验研究[D].大连:大连理工大学,2010:1-2. SONG G Z. Theoretical analysis and experimental research on abrasive flow machining[D]. Dalian:Dalian University of Technology,2010:1-2(in Chinese).
[17] 于博. 复杂形状零件的磨料流超精密抛光装置夹具研究[D]. 长春:长春理工大学,2012:2-4. YU B. A research on fixture design of the parts with complicated shape by abrasive flow machining[D]. Changchun:Changchun University of Science and Technology, 2012:2-4(in Chinese).
[18] 季田, 卞桂虹, 刘向东, 等. 离心压缩机窄流道闭式叶轮抛光工艺研究[J]. 金刚石与磨料磨具工程, 2007(6):38-41. JI T, BIAN G H, LIU X D, et al. Study on polishing technology for narrow path enclosed impeller of centrifugal compressor[J]. Diamond & Abrasive Engineering, 2007(6):38-41(in Chinese).
[19] 郭应竹. 整体叶轮叶片型面抛光的最佳选择——磨料流加工[J]. 航空工艺技术, 1995(5):27-29. GUO Y Z. Abrasive flow machining-The most optimal selection for blade profile polishing of integrated impeller[J]. Aeronautical Manufacturing Technology, 1995(5):27-29(in Chinese).
[20] 郭应竹. 磨料流去除电解加工型面腐蚀层的工艺研究[J]. 航空工艺技术, 1997(5):39-40. GUO Y Z. Removing corroded layer on ECM machined profile by using abrasive flow machining[J]. Aeronautical Manufacturing Technology, 1997(5):39-40(in Chinese).
[21] WILLIAMS R E, RAJURKAR K P. Metal removal and surface finish characteristics in abrasive flow machining[D]. Nebraska:University of Nebraska, Lincoln, 1989:21-26.
[22] WILLIAMS R E, MELTON V L. Abrasive flow finishing of stereolithography prototypes[J]. Rapid Prototyping Journal, 1998, 4(2):56-67.
[23] BERLANGER S, BORDU S, MALEVILLE T J, et al. Process for manufacturing a single-piece blisk by cutting with an abrasive water jet:US20110016715A1[P]. 2009-03-25.
[24] BERLANGER S, BORDU S, MALEVILLE T J, et al. Process for manufacturing a single-piece blisk with a temporary blade support ring removed after a milling finishing step:US20110041334A1[P]. 2009-03-25.
[25] BERLANGER S, BORDU S, MALEVILLE T J, et al. Process for manufacturing a single-piece blisk with a temporary blade support ring removed before a milling step:US20110023300A1[P]. 2009-03-25.
[26] BERLANGER S, BORDU S, MALEVILLE T J, et al. Process for manufacturing a single-piece blisk with a temporary blade support ring removed before a milling finishing step:US20110016716A1[P]. 2009-03-25.
[27] 高航, 吴鸣宇, 付有志, 等. 流体磨料光整加工理论与技术的发展[J]. 机械工程学报, 2015, 51(7):174-187. GAO H, WU M Y, FU Y Z, et al. Development of theory and technology in fluid abrasive finishing technology[J]. Journal of Mechanical Engineering, 2015, 51(7):174-187(in Chinese).
[28] 朱建辉. 航空叶轮的磨料流加工模拟分析及可行性研究[D]. 大连:大连理工大学,2013:43-55. ZHU J H. Simulating analysis and feasibility research of aero-impeller on abrasive flow machining[D]. Dalian:Dalian University of Technology, 2013:43-55(in Chinese).
[29] 刘向东, 季田, 庞占元, 等. 离心压缩机叶轮流道磨料流抛光及其对压缩机效率的影响[J]. 组合机床与自动化加工技术, 2009(3):12-15. LIU X D, JI T, PANG Z Y, et al. Study on AFM polishing of centrifugal compressor impeller and its effects on compressor efficiency[J]. Combined Machine Tools and Automatic Processing Technology, 2009(3):12-15(in Chinese).
[30] 张森棠, 李冬梅, 赵恒, 等. 一种整体叶盘双驱动轴复合自动光整加工方法:ZL200910248649.4[P]. 2011-06-29. ZHANG S T, LI D M, ZHAO H, et al. An automatic polishing processing method of the dual drive shaft for the blisk:ZL200910248649.4[P]. 2011-06-29(in Chinese).
[31] 蔺小军, 吴广, 张军锋, 等. 整体叶盘磨料流抛光用夹具:ZL201310068486.8[P]. 2013-05-22. LIN X J, WU G, ZHANG J F, et al. A fixture for blisk polishing with abrasive flow machining:ZL201310068486.8[P]. 2013-05-22(in Chinese).
[32] 郭龙文, 杨能阁, 陈燕. 磁力研磨工艺对整体叶盘表面完整性的影响[J]. 中国表面工程, 2013,26(3):10-14. GUO L W, YANG N G, CHEN Y. Influence of magnetic abrasive finishing technology on surface integrity of vane integrated disk[J]. China Surface Engineering, 2013, 26(3):10-14(in Chinese).
[33] 郭龙文. 磁力研磨加工对TC4钛合金表面完整性影响的研究[D]. 鞍山:辽宁科技大学, 2014:3-5. GUO L W. Effects of magnetic abrasive finishing on surface integrity of TC4 titanium alloy[J]. Anshan:University of Science and Technology Liaoning, 2014:3-5(in Chinese).
[34] 陈燕, 周锟, 牛凤丽, 等. 航空发动机整体叶盘磁力研磨光整实验[J]. 航空动力学报, 2015, 30(10):2323-2330. CHEN Y, ZHOU K, NIU F L, et al. Experiment of surface finishing on aero-engine blisk by magnetic abrasive finishing[J]. Journal of Aerospace Power, 2015, 30(10):2323-2330(in Chinese).
[35] 杜兆伟, 陈燕, 周锟, 等. 磁力研磨法对整体叶盘的抛光工艺研究[J]. 航空制造技术,2015(20):93-95, 100. DU Z W, CHEN Y, ZHOU K, et al. Study on blisk surface polishing by magnetic abrasive finishing[J]. Aeronautical Manufacturing Technology, 2015(20):93-95,100(in Chinese).
[36] LI X, MENG F J, CUI W, et al. The CNC grinding of integrated impeller with electroplated CBN wheel[J]. The International Journal of Advanced Manufacturing Technology, 2015, 79(5):1353-1361.
[37] 王福元. 整体叶轮叶片型面数控电解精加工的若干关键技术研究[D]. 南京:南京航空航天大学, 2012:6-14. WANG F Y. Research on the key technologies of NC-electrochemical precision machining of blade surface of integral impeller[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012:6-14(in Chinese).
[38] KLOCKEA F, ZEISA M, KLINKA A, et al. Experimental research on the electrochemical machining of modern titanium-and nickel-based alloys for aero engine components[J]. Procedia CIRP, 2013, 6:368-372.
[39] KLOCKEA F, ZEISA M, KLINKA A, et al. Technological and economical comparison of roughing strategies via milling, EDM and ECM for titanium-and nickel-based blisks[J]. Procedia CIRP, 2012, 2:98-101.
[40] KLOCKEA F, ZEISA M, KLINKA A, et al. Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium-and nickel-based blisks[J]. CIRP Journal of Manufacturing Science and Technology, 2013, 6(3):198-203.
[41] 陈修文. 整体叶盘电解加工的流场仿真与试验[D]. 南京:南京航空航天大学, 2012:24-27. CHEN X W. Flowing field simulation and experiments on electrochemical machining of blisk[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012:24-27(in Chinese).
[42] 孙春都. 整体叶盘型面电解加工阴极设计与试验研究[D]. 南京:南京航空航天大学, 2013:27-53. SUN C D. The electrode design and experiments in blisk electrochemical machining[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2013:27-53(in Chinese).
[43] 赵建社, 王福元, 徐家文, 等. 整体叶轮自由曲面叶片精密电解加工工艺研究[J]. 航空学报, 2013, 34(12):2841-2848. ZHAO J S, WANG F Y, XU J W, et al. Research on electrochemical machining process for fine finishing of integral impeller with free-form surface blade[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(12):2841-2848(in Chinese).
[44] 王福元, 赵建社. 基于电解扫掠成形原理的整体叶盘叶根加工方法[J]. 航空学报, 2015, 36(10):3457-3464. WANG F Y, ZHAO J S. Processing method of blade root of blisk based on principle of electrochemical sweep shaping[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(10):3457-3464(in Chinese).
[45] ZHU D, ZHU D, XU Z Y, et al. Trajectory control strategy of cathodes in blisk electrochemical machining[J]. Chinese Journal of Aeronautics, 2013, 26(4):1064-1070.
[46] 刘嘉, 徐正扬, 万龙凯, 等. 整体叶盘叶型电解加工流场设计及实验[J]. 航空学报,2014, 35(1):259-267. LIU J, XU Z Y, WAN L K, et al. The design and experiment of the flow field for the electrochemical machining of blisk surface[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(1):259-267(in Chinese).
[47] LIU X, KANG X, ZHAO W, et al. Electrode feeding path searching for 5-axis EDM of integral shrouded blisks[J]. Procedia CIRP, 2013, 6:107-111.
[48] TANG L, GAN W M. Utilization of flow field simulations for cathode design in electrochemical machining of aerospace engine blisk channels[J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(9):1759-1766.
[49] XU Z Y, XU Q, ZHU D, et al. A high efficiency electrochemical machining method of blisk channels[J]. CIRP Annals-Manufacturing Technology, 2013, 62(1):187-190.
[50] 刘嘉, 徐正扬, 万龙凯, 等. 整体叶盘型面电解加工阴极进给方向优化及试验研究[J]. 机械工程学报, 2014, 50(7):146-153. LIU J, XU Z Y, WAN L K, et al. Optimization and experiment of cathode feeding direction in electrochemical machining of blisk[J]. Journal of Mechanical Engineering, 2014, 50(7):146-153(in Chinese).
[51] ZHU D, ZHU D, XU Z Y. Optimal design of the sheet cathode using W-shaped electrolyte flow mode in ECM[J]. The International Journal of Advanced Manufacturing Technology, 2012, 62(1):147-156.
[52] 孙伦业, 徐正扬, 朱荻. 叶盘通道径向电解加工的流场设计及试验[J]. 华南理工大学学报:自然科学版, 2013, 41(3):95-100. SUN L Y, XU Z Y, ZHU D. Flow field design and experimental investigation of radial electrochemical machining of blisk channels[J]. Journal of South China University of Technology:Natural Science Edition, 2013, 41(3):95-100(in Chinese).
[53] XU Z Y, SUN L Y, HU Y, et al. Flow field design and experimental investigation of electrochemical machining on blisk cascade passage[J]. The International Journal of Advanced Manufacturing Technology, 2014,71(1):459-469.
[54] 刘嘉, 方忠东, 邓守成, 等. 整体叶盘电解加工阴极修正方法与试验[J]. 南京航空航天大学学报, 2014, 46(5):744-749. LIU J, FANG Z D, DENG S C, et al. Experimental study on cathode modification for electrochemical machining of blisk[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2014, 46(5):744-749(in Chinese).
[55] 万龙凯, 曲宁松, 刘嘉, 等. 整体叶盘型面电解加工阴极"C"形加强筋结构优化设计[J]. 机械制造与自动化, 2015(3):5-8,16. WAN L K, QU N S, LIU J, et al. Optimal design of cathode C-shaped reinforced structure in blisk ECM[J]. Machinery Manufacturing and Automation, 2015(3):5-8,16(in Chinese).
[56] 朱海南, 于冰, 王德新, 等. 一种整体叶盘叶片型面抛光的加工装置及方法:ZL201110356510.9[P]. 2012-06-13. ZHU H N, YU B, WANG D X, et al. A polishing apparatus and method for blisk blade surface:ZL201110356510.9[P]. 2012-06-13(in Chinese).
[57] ZHANG X, KUHLENKÖTTER B, KNEUPNER K. An efficient method for solving the Signorini problem in the simulation of free-form surfaces produced by belt grinding[J]. International Journal of Machine Tools & Manufacture, 2005, 45(6):641-648.
[58] REN X, KUHLENKÖTTER B, MVLLER H. Simulation and verification of belt grinding with industrial robots[J]. International Journal of Machine Tools & Manufacture, 2006, 46(7-8):708-716.
[59] REN X, CABARAVDIC M, ZHANG X, et al. A local process model for simulation of robotic belt grinding[J]. International Journal of Machine Tools & Manufacture, 2007, 47(6):962-970.
[60] SUN Y Q, GIBLIN D J, KAZEROUNIAN K. Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniques[J]. Robotics and Computer-Integrated Manufacturing, 2009, 25(1):204-210.
[61] 赵扬. 机器人磨削叶片关键技术研究[D]. 长春:吉林大学,2009:91-92. ZHAO Y. Research on key technology of robotic blade grinding[D]. Changchun:Jilin University, 2009:91-92(in Chinese).
[62] ZHANG D, YUN C, SONG D Z. Dexterous space optimization for robotic belt grinding[J]. Procedia Engineering, 2011,15:2762-2766.
[63] WANG W, YUN C, ZHANG L, et al. Designing and optimization of an off-line programming system for robot belt grinding process[J]. Chinese Journal of Mechanical Engineering, 2011, 24(4):647-655.
[64] WANG W, YUN C. A path planning method for robotic belt surface grinding[J]. Chinese Journal of Aeronautics, 2011, 24(4):520-526.
[65] GAO Z H, LAN X D, BIAN Y S. Structural dimension optimization of robotic belt grinding system for grinding workpieces with complex shaped surfaces based on dexterity grinding space[J]. Chinese Journal of Aeronautics, 2011, 24(3):346-354.
[66] SONG Y X, LIANG W, YANG Y. A method for grinding removal control of a robot belt grinding system[J]. Journal of Intelligent Manufacturing, 2012, 23(5):1903-1913.
[67] 张海洋. 叶片砂带磨削机器人轨迹规划与离线编程[D]. 武汉:华中科技大学, 2014:7-8. ZHANG H Y. Robotic trajectory planning and off-line programming for belt grinding of turbine blade[D]. Wuhan:Huazhong University of Science and Technology, 2014:7-8(in Chinese).
[68] ZHU D H, LUO S Y, YANG L, et al. On energetic assessment of cutting mechanisms in robot-assisted belt grinding of titanium alloys[J]. Tribology International, 2015, 90:55-59.
[69] 徐文秀, 史耀耀. 整体叶盘机器人自动化抛光技术[J]. 机械设计, 2010, 27(7):47-50. XU W X, SHI Y Y. Automatic polishing technology of blisk robot[J]. Journal of Machine Design, 2010, 27(7):47-50(in Chinese).
[70] 史耀耀, 蔺小军, 李小彪, 等. 一种用于抛光整体叶盘的磨头机构:ZL201110190191.9[P]. 2011-11-23. SHI Y Y, LIN X J, LI X B, et al. A grinding head used for blisk polishing:ZL201110190191.9[P]. 2011-11-23(in Chinese).
[71] 史耀耀, 段继豪, 李小彪, 等. 一种用于整体叶盘表面抛光的柔性磨头:ZL201110237499.4[P]. 2011-12-07. SHI Y Y, DUAN J H, LI X B, et al. A flexible grinding head used for blisk polishing:ZL201110237499.4[P]. 2011-12-07(in Chinese).
[72] 李小彪, 史耀耀, 董婷, 等. 一种用于整体叶盘抛光的磨头成型方法:ZL201110257776.8[P]. 2011-12-14. LI X B, SHI Y Y, DONG T, et al. A grinding forming method for blisk polishing:ZL201110257776.8[P]. 2011-12-14(in Chinese).
[73] 史耀耀, 蔺小军, 李小彪, 等. 一种整体叶盘叶片型面的数控抛光方法:ZL201110257777.2[P]. 2011-12-14. SHI Y Y, LIN X J, LI X B, et al. A numerical control polishing method for blisk blade:ZL201110257777.2[P]. 2011-12-14(in Chinese).
[74] 史耀耀, 蔺小军, 李小彪, 等. 一种用于抛光整体叶盘的磨头机构:ZL201120237405.9[P]. 2012-02-08. SHI Y Y, LIN X J, LI X B, et al. A grinding head used for blisk polishing:ZL201120237405.9[P]. 2012-02-08(in Chinese).
[75] 段继豪, 史耀耀, 李小彪, 等. 整体叶盘柔性磨头自适应抛磨实现方法[J]. 航空学报, 2011, 32(5):934-940. DUAN J H, SHI Y Y, LI X B, et al. Adaptive polishing for blisk by flexible grinding head[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(5):934-940(in Chinese).
[76] 蔺小军, 杨阔, 吴广, 等. 开式整体叶盘叶片型面数控抛光编程与工艺实验研究[J]. 航空精密制造技术, 2013(2):38-40,34. LIN X J, YANG K, WU G, et al. Study on NC polishing programming and process experiments of blade surface for open blisk[J]. Aviation Precision Manufacturing Technology, 2013(2):38-40,34(in Chinese).
[77] ZHAO T, SHI Y Y, LIN X J, et al. Surface roughness prediction and parameters optimization in grinding and polishing process for IBR of aero-engine[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74(5):653-663.
[78] ZHAO P B, SHI Y Y. Posture adaptive control of the flexible grinding head for blisk manufacturing[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(9):1989-2001.
[79] ZHAO P B, SHI Y Y. Adaptive sliding mode control of the A-axis used for blisk manufacturing[J]. Chinese Journal of Aeronautics, 2014, 27(3):708-715.
[80] 黄云,黄智. 现代砂带磨削技术及工程应用[M]. 重庆:重庆大学出版社,2009:12-16. HUANG Y, HUANG Z. Modern abrasive belt grinding technology and application in engineering[M]. Chongqing:Chongqing University Press, 2009:12-16(in Chinese).
[81] 黄云, 杨俊峰, 叶潇潇, 等. 一种适应于航空航天整体叶盘叶片内外弧面的砂带磨削装置:ZL2012102340507[P]. 2014-06-18. HUANG Y, YANG J F, YE X X, et al. A belt grinding equipment used for blisk blade edge-R:ZL2012102340507[P]. 2014-06-18(in Chinese).
[82] 黄云, 杨俊峰, 叶潇潇, 等. 适用于航空航天整体叶盘叶片内、外弧面的砂带磨削装置:201220327496.X[P]. 2013-01-23. HUANG Y, YANG J F, YE X X, et al. A belt grinding equipment used for blisk blade edge-R:ZL201220327496.X[P]. 2013-01-23(in Chinese).
[83] 魏和平. 整体叶盘叶片内外弧型面砂带磨削技术研究[D]. 重庆:重庆大学,2014:40-43. WEI H P. Research on abrasive belt grinding of blisk blade inner and outer profile[D]. Chongqing:Chongqing University, 2014:40-43(in Chinese).
[84] XIAO G J, HUANG Y. Constant-load adaptive belt polishing of the weak-rigidity blisk blade[J]. The International Journal of Advanced Manufacturing Technology, 2015, 78(9-12):1473-1484.
[85] 张雷, 刘春辉, 王昕, 等. 一种用于整体叶盘自动磨抛的砂带工具系统:ZL201310018970.X[P]. 2013-04-10. ZHANG L, LIU C H, WANG X, et al. An automatic belt polishing tool system for blisk:ZL201310018970.X[P]. 2013-04-10(in Chinese).
[86] 张雷, 刘春辉, 王昕, 等. 一种用于整体叶盘自动磨抛的砂带工具系统:ZL201320027333.4[P]. 2013-07-24. ZHANG L, LIU C H, WANG X, et al. An automatic belt polishing tool system for blisk:ZL201320027333.4[P]. 2013-07-24(in Chinese).
[87] 张雷, 王昕, 张小光, 等. 整体叶盘磨抛加工与测量一体化装置:ZL201310358708.X[P]. 2013-12-18 ZHANG L, WANG X, ZHANG X G, et al. Integrated device with polishing and measurement for the blisk:ZL201310358708.X[P]. 2013-12-18(in Chinese).
[88] 张雷, 王昕, 张小光, 等. 整体叶盘磨抛加工与测量一体化装置:ZL201320502554.2[P]. 2014-03-12. ZHANG L, WANG X, ZHANG X G, et al. Integrated device with polishing and measurement for the blisk:ZL201320502554.2[P]. 2014-03-12(in Chinese).
[89] 张雷, 贺昌龙, 唐洪峰, 等. 用于整体叶盘叶片进排气边和叶根磨抛的集成式工具系统:ZL201410126559.9[P]. 2014-06-04. ZHANG L, HE C L, TANG H F, et al. Integrated tool system for the grinding and polishing of edge and root of blisk blade:ZL201410126559.9[P]. 2014-06-04(in Chinese).
[90] 张雷, 贺昌龙, 唐洪峰, 等. 用于整体叶盘叶片进排气边和叶根磨抛的集成式工具系统:ZL201420132362.1[P]. 2014-07-30. ZHANG L, HE C L, TANG H F, et al. Integrated tool system for the grinding and polishing of edge and root of blisk blade:ZL201410126559.9[P]. 2014-07-30(in Chinese).
[91] 赵怀祥. 抛磨整体叶盘工具系统研究[D]. 长春:吉林大学, 2011:8-9. ZHAO H X. Development of polishing tool for blisk[D]. Changchun:Jilin University, 2011:8-9(in Chinese).
[92] 齐文.整体叶盘磨削工具系统研究[D]. 长春:吉林大学, 2012:11-12. QI W. Research of grinding tool system for blisk[D]. Changchun:Jilin University, 2012:11-12(in Chinese).
[93] 刘春辉. 整体叶盘砂带磨抛工具系统研究[D]. 长春:吉林大学, 2014:6-7. LIU C H. Research on the abrasive belt grinding and polishing tool system for blisk finishing[D]. Changchun:Jilin University, 2014:6-7(in Chinese).
[94] 张福庆. 整体叶盘磨抛机床虚拟样机研究[D]. 长春:吉林大学, 2013:9-10. ZHANG F Q. Research on virtual prototype of grinding and polishing mahcine tool for blisk finishing[D]. Changchun:Jilin University, 2013:9-10(in Chinese).
[95] 张小光. 整体叶盘磨抛测机床结构优化与分析[D]. 长春:吉林大学, 2014:5. ZHANG X G. Structure optimization and analysis of grinding polishing and measurement machine tool for blisk finishing[D]. Changchun:Jilin University, 2014:5(in Chinese).
[96] 孙振江. 整体叶盘砂带磨抛加工轨迹规划研究[D]. 长春:吉林大学, 2014:8-9. SUN Z J. Research on belt polishing path planning process for blisk[D]. Changchun:Jilin University, 2014:8-9(in Chinese).
[97] 徐义程. 整体叶盘磨抛力/位解耦控制研究[D]. 长春:吉林大学, 2014:8-9. XU Y C. Research on force/position decoupling control for blisk grinding and polishing[D]. Jilin:Changchun University, 2014:8-9(in Chinese).
[98] 袁帅. 整体叶盘磨抛检测一体化机床结构开发与装配工艺研究[D]. 长春:吉林大学, 2015:5-6. YUAN S. Research on design and assembly of polishing and measuring machine tool for blisk finishing[D]. Changchun:Jilin University, 2015:5-6(in Chinese).
[99] XIAO G J, HUANG Y, HUANG Z. Online measurement of the crankshaft crankpin roundness errors in the process of coordinate polishing with abrasive tap[J]. Advanced Materials Research, 2010, 126-128:696-700.
[100] ZHANG L, HUANG Y, HUANG Z. Study of the on-line testing method for the abrasive belt follow-up grinding of the journal of crankshaft connecting rod[J]. Advanced Materials Research, 2011, 487:407-412.
[101] ZHANG M, HUANG Y, ZHANG L. Research on the mechanism of coordinate polishing crankshaft crankpin with abrasive belt[J]. Key Engineering Materials, 2011,487:456-471.
[102] 肖贵坚. 砂带随动研磨曲轴连杆颈基础技术研究及应用[D]. 重庆:重庆大学,2011:8-9. XIAO G J. Research on basic applied technology of follow finishing crankshaft journals with abrasive belt[D]. Chongqing:Chongqing University, 2011:8-9(in Chinese).
[103] 肖贵坚, 黄云, 黄智. 超声振动砂带研磨曲轴主轴颈实验研究[J]. 机械科学与技术, 2011, 30(1):92-97. XIAO G J, HUANG Y, HUANG Z. Experimental research on the vibration polishing of the crankshaft main journals with abrasive tap[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 30(1):92-97(in Chinese).
[104] 肖贵坚, 黄云, 黄智. 砂带随动研磨曲轴连杆颈运动模型的理论研究[J]. 机械科学与技术,2011, 30(3):394-399. XIAO G J, HUANG Y, HUANG Z. Movement model of coordinate polishing crankshaft crankpin with abrasive tap[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 30(3):394-399(in Chinese).
[105] 黄云, 肖贵坚, 潘复生, 等. 一种砂带研磨抛光装置:ZL201410334811.5[P]. 2014-07-15. HUANG Y, XIAO G J, PAN F S, et al. Abrasive belt grinding and polishing device:ZL201410334811.5[P]. 2014-07-15(in Chinese).
[106] 黄云, 肖贵坚, 潘复生, 等. 一种砂带研磨抛光装置:ZL201420389144.6[P]. 2015-01-07. HUANG Y, XIAO G J, PAN F S, et al. Abrasive belt grinding and polishing device:ZL201420389144.6[P]. 2015-01-07(in Chinese).
[107] 黄云, 赵浩岑, 杨俊峰, 等. 基于阿基米德螺旋线的砂带研磨控制系统和方法:ZL201510221386.3[P]. 2015-09-09. HUANG Y, ZHAO H C, YANG J F, et al. Belt grinding control system and method based on archimedes spiral:ZL201510221386.3[P]. 2015-09-09(in Chinese).
[108] 黄云, 杨俊峰, 陈贵林, 等. 适用于整体叶盘叶片的砂带磨削中心:ZL201520481124.6[P]. 2014-07-07. HUANG Y, YANG J F, CHEN G L, et al. Abrasive belt grinding center for blisk blade:ZL201520481124.6[P]. 2014-07-07(in Chinese).
[109] 黄云, 杨俊峰, 陈贵林, 等. 一种适用于整体叶盘叶片的砂带磨削中心:ZL201420132362.1[P]. 2014-07-30. HUANG Y, YANG J F, CHEN G L, et al. An abrasive belt grinding center for blisk blade:ZL201420132362.1[P]. 2014-07-30(in Chinese).
[110] 肖贵坚, 黄云, 伊浩. 面向型面精度一致性的整体叶盘砂带磨削新方法及实验研究[J]. 航空学报, 2016, 37(5):1666-1676. XIAO G J, HUANG Y, YI H. Experimental research on the new belt grinding method for the consistency of the blisk profile and surface precision[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(5):1666-1676(in Chinese).