[1] |
李辉,张立同,曾庆丰,等. 2D C/SiC复合材料的可靠性评价[J]. 复合材料学报, 2007, 24(4):95-100. LI H, ZHANG L T, ZENG Q F, et al. Reliability analysis of 2D C/SiC composite[J]. Acta Materiae Compositae Sinica, 2007, 24(4):95-100(in Chinese).
|
[2] |
周亚东, 费庆国,吴邵庆,等. C/SiC材料疲劳试验加载频率的数值研究[J]. 振动工程学报, 2016, 29(6):985-991. ZHOU Y D, FEI Q G, WU S Q, et al. Numerical investigation of the loading frequency for fatigue test of C/SiC materials[J]. Journal of Vibration Engineering, 2016, 29(6):985-991(in Chinese).
|
[3] |
CHEN S F, FEI Q G, JIANG D, et al. Determination of thermo-elastic parameters for dynamical modeling of 2.5D C/SiC braided composites[J]. Journal of Mechanical Science and Technology, 2018, 32(1):231-243.
|
[4] |
CALARD V, LAMON J. A probabilistic-statistical approach to the ultimate failure of ceramic-matrix composites-Part I:Experimental investigation of 2D woven SiC/SiC composites[J]. Composites Science & Technology, 2002, 62(3):385-393.
|
[5] |
CALARD V, LAMON J. A probabilistic-statistical approach to the ultimate failure of ceramic-matrix composites-Part Ⅱ:Macroscopic model[J]. Composites Science & Technology, 2002, 62(3):395-399.
|
[6] |
LU C, DANZER R, FISCHER F D. Fracture statistics of brittle materials:Weibull or normal distribution[J]. Physical Review E, 2002, 65(6):067102.
|
[7] |
郭飞, 费庆国,李彦斌,等. 基于Weibull模型的C/C销钉剪切强度分布及本构关系[J/OL]. 复合材料学报, (2018-04-13)[2018-12-10]. https://doi.org/10.13801/j.cnki.fhclxb.20180412.001. GUO F, FEI Q G, LI Y B, et al. Shear strength distribution and constitutive model of C/C composite pins based on Weibull model[J/OL]. Acta Materiae Compositae Sinica, (2018-04-13)[2018-12-10]. https://doi.org/10.13801/j.cnki.fhclxb.20180412.001(in Chinese).
|
[8] |
BASU B, TIWARI D, KUNDU D, et al. Is Weibull distribution the most appropriate statistical strength distribution for brittle materials?[J]. Ceramics International, 2009, 35(1):237-246.
|
[9] |
严科飞, 张程煜,乔生儒,等. C/C复合材料室温面内剪切强度分布[J]. 机械强度, 2012, 34(6):912-915. YAN K F, ZHANG C Y, QIAO S R, et al. Statistical distribution of in-plane shear strength of C/C composite at room temperature[J]. Journal of Mechanical Strength, 2012, 34(6):912-915(in Chinese).
|
[10] |
DEY A K, KUNDU D. Discriminating among the log-normal, weibull, and generalized exponential distributions[J]. IEEE Transactionson Reliability, 2009, 58(3):416-424.
|
[11] |
DANZER R. Some notes on the correlation between fracture and defect statistics:Are Weibull statistics valid for very small specimens?[J]. Journal of the European Ceramic Society, 2006, 26(15):3043-3049.
|
[12] |
PAI S S, GYEKENYESI J P. Calculation of Weibull strength parameters and Batdorf flow-density constants for volume-and surface-flaw-induced fracture in ceramics:NASA-TM-100890[R]. Washington, D.C.:NASA,1988.
|
[13] |
XU Y, CHENG L, ZHANG L, et al. Optimization of sample number for Weibull function of brittle materials strength[J]. Ceramics International, 2001, 27(2):239-241.
|
[14] |
DANZER R, LUBE T, SUPANCIC P. Monte Carlo simulations of strength distributions of brittle materials:Type of distribution, specimen and sample size[J]. Zeitschrift fur Metallkunde, 2001, 92(7):773-783.
|
[15] |
NOHUT S. Influence of sample size on strength distribution of advanced ceramics[J]. Ceramics International, 2014, 40(3):4285-4295.
|
[16] |
费庆国, 张令弥,李爱群,等. 基于不同残差的动态有限元模型修正的比较研究[J]. 振动与冲击, 2005, 24(4):24-26. FEI Q G, ZHANG L M, LI A Q, et al. Evaluation of FE model updating using four kinds of residues[J]. Journal of Vibration and Shock, 2005, 24(4):24-26(in Chinese).
|
[17] |
孙岩, 刘勇琼,廖英强. 针刺C/C复合材料剪切性能[J]. 宇航材料工艺, 2012, 42(3):91-95. SUN Y, LIU Y Q, LIAO Y Q. Shear properties of needled felt carbon/carbon composites[J]. Aerospace Materials & Technology, 2012, 42(3):91-95(in Chinese).
|
[18] |
潘晋波, 崔万继,王富强,等. 针刺C/C复合材料层间剪切强度的研究[C]//第17届全国复合材料学术会议, 2012:927-930. PAN J B, CUI W J, WANG F Q, et al. Investigation on interlaminar shear strength of needled Carbon/Carbon composites[C]//17th National Conference on Composite Materials, 2012:927-930(in Chinese).
|
[19] |
HATTA H, GOTO K, AOKI T. Strengths of C/C composites under tensile, shear, and compressive loading:Role of interfacial shear strength[J]. Composites Science & Technology, 2005, 65(15):2550-2562.
|
[20] |
赵卫, 乔玲,韩晓林,等. C/C-SiC复合材料的表面烧蚀模型及数值模拟[J]. 东南大学学报(自然科学版), 2011, 41(2):365-369. ZHAO W, QIAO L, HAN X L, et al. Surface ablation model and numerical simulation of C/C-SiC composites[J]. Journal of Southeast University(Natural Science Edition), 2011,41(2):365-369(in Chinese).
|
[21] |
COX D R. Further results on tests of separate families of hypotheses[J]. Journal of the Royal Statistical Society. Series B:Methodological, 1962, 24(2):406-424.
|
[22] |
JACQUELIN J. A reliable algorithm for the exact median rank function[J]. IEEE Transactions on Electrical Insulation, 1993, 28(2):168-171.
|