7075铝合金在不同温度盐水环境中的腐蚀疲劳行为

doi:10.7527/S1000-6893.2014.0155

Abstract

Abstract:

Based on high-temperature corrosion fatigue injury problems caused by seawater splash and insolation when aircraft structure material 7075 aluminum alloy servicing at coastal area, the corrosion fatigue life of 7075 aluminum alloy in 35, 55, 75 ℃, 3.5% NaCl saline water is studied by corrosion fatigue life test, and the influence of temperature on corrosion fatigue crack initiation and propagation is discussed by fracture morphology observation using scanning electron microscope (SEM). The results indicate that at the same stress level, corrosion fatigue life decreases with the temperature rising, such as the median fatigue life is respectively 33 001, 30 931, 15 346 cycles while temperature is 35, 55, 75 ℃ at the stress of 300 MPa. There is a competitive relationship between corrosion damage and fatigue damage. When at high stress level, corrosion damage is slight and fatigue damage is the main influencing factor of fatigue life; fatigue source usually initiates from the interface between matrix and Al clad. When the stress level is low, corrosion damage gets severe and fatigue life declines sharply with the temperature rising; fatigue source usually initiates from corrosion pitting. Fracture morphology shows that high-temperature environment influences initiation of fatigue source mainly by accelerating the formation of corrosion pitting, and pitting with deep hole shape is often accompanied by severe stress concentration which does great damage to fatigue property.

Key words: 7075 aluminum alloy, corrosion fatigue, temperature, saline water, pitting

CLC Number:

LIU Xuan, LIU Huicong, LI Weiping, YE Xubin, ZHU Liqun. Corrosion Fatigue Behavior of 7075 Aluminum Alloy in Saline Water Environment at Different Temperatures[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(10): 2850-2856.

References

[1] Feng L C, He Y Q, Qiao B, et al. Corrosion and protection of metal and alloy in marine environment[J]. Hot Working Technology, 2013, 42(24): 13-17. (in Chinese) 冯立超, 贺毅强, 乔斌, 等. 金属及合金在海洋环境中的腐蚀与防护[J]. 热加工工艺, 2013, 42(24): 13-17.

[2] Kermanidis A T, Petroyiannis P V, Pantelakis S G. Fatigue and damage tolerance behaviour of corroded 2024 T351 aircraft aluminum alloy[J]. Theoretical and Applied Fracture Mechanics, 2005, 43(1): 121-132.

[3] Wang Z P, Xu T J, Su J X. Research on relationship of civil aircraft cargo compartment corrosion and its influencing factors based on data model[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(5): 940-948. (in Chinese) 王志平, 徐天杰, 苏景新. 基于数据模型的某型民用飞机货舱区域腐蚀影响因素研究[J]. 航空学报, 2012, 33(5): 940-948.

[4] Mu Z T, Chen D H, Zhu Z T, et al. Fatigue crack growth behavior of aerospace aluminum alloy LD2 under corrosion[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(3): 574-579. (in Chinese) 穆志韬, 陈定海, 朱做涛, 等. 腐蚀条件下LD2航空铝合金裂纹扩展规律研究[J]. 航空学报, 2013, 34(3): 574-579.

[5] Chen B, Liu J Z, Wang H W, et al. Advance in fatigue behavior for pre-corroded aluminium alloy[J]. Failure Analysis and Prevention, 2011, 6(3): 186-192. (in Chinese) 陈勃, 刘建中, 王浩伟, 等. 腐蚀预损伤铝合金的疲劳行为研究进展[J]. 失效分析与预防, 2011, 6(3): 186-192.

[6] He C W, Cai X S, Li S Q. Corrosion and corrosion fatigue of typical aircraft joints[J]. Corrosion & Protection, 2006, 27(3): 118-121. (in Chinese) 贺崇武, 蔡新锁, 李素强. 飞机典型连接件腐蚀及腐蚀疲劳试验研究[J]. 腐蚀与防护, 2006, 27(3): 118-121.

[7] Cheng Z H. Study on corrosion behaviors of the LY12CZ aluminum alloy plane component[D]. Harbin: Harbin Engineering University, 2006. (in Chinese) 程宗辉. LYl2CZ铝合金飞机构件腐蚀行为研究[D]. 哈尔滨: 哈尔滨工程大学, 2006.

[8] Sun S Q, Zhao Y B, Zheng Q F, et al. Evolution mechanism of pitting of Al clad 7075 and 2024 aluminium alloy in coastal[J]. Journal of Chinese Society for Corrosion and Protection, 2012, 32(3): 195-202. (in Chinese) 孙霜青, 赵予兵, 郑弃非, 等. 包铝的7075和2024合金在海洋大气环境中的点蚀演化机制[J]. 中国腐蚀与防护学报, 2012, 32(3): 195-202.

[9] Chen S J, Yuan Q M, He J P, et al. Experimental evaluation of computing method of instantaneous corrosion rate for 7075 aluminum alloy[J]. Journal of Materials Engineering, 2004(12): 43. (in Chinese) 陈素晶, 袁庆铭, 何建平, 等. 7075铝合金瞬时腐蚀速率的计算和试验验证[J]. 材料工程, 2004(12): 43.

[10] Liu X L, He J P, Chen S J. Electrochemical noise of 7075 aluminum alloy during a simulated atmospheric corrosion process[J]. Corrosion Science and Protection Technology, 2006, 18(5): 386-388. (in Chinese) 刘晓磊, 何建平, 陈素晶. 电化学噪声表征7075铝合金的模拟大气腐蚀过程[J]. 腐蚀科学与防护技术, 2006, 18(5): 386-388.

[11] Burns J T, Gupta V K, Agnew S R, et al. Effect of low temperature on fatigue crack formation and microstructure-scale propagation in legacy and modern Al-Zn-Mg-Cu alloys[J]. International Journal of Fatigue, 2013, 55: 268-275.

[12] Hui L, Zhou S, Xu L, et al. Influence of saline environment on fatigue property of pre-corroded aluminum alloy[J]. Journal of Aeronautical Materials, 2012, 32(3): 73-78. (in Chinese) 回丽, 周松, 许良, 等. 盐水环境对预腐蚀铝合金腐蚀疲劳性能的影响[J]. 航空材料学报, 2012, 32(3): 73-78.

[13] Feng X F. Investigation on corrosion fatigue strength of 2024-T351 alloy in 3.5% NaCl salt solution[D]. Hangzhou: Zhejiang University, 2014. (in Chinese) 冯先锋. 盐水环境下2024-T351铝合金的腐蚀疲劳强度研究[D]. 杭州: 浙江大学, 2014.

[14] GB/T 3075－2008 Metallic materials—fatigue testing—axial-force-controlled method[S]. Beijing: Standards Press of China, 2008. (in Chinese) GB/T 3075－2008 金属材料疲劳试验轴向力控制方法[S]. 北京: 中国标准出版社,2008.

[15] GB/T 24176－2009 Metallic materials—fatigue testing—statistical planning and analysis of data[S]. Beijing: Standards Press of China, 2009.(in Chinese) GB/T 24176－2009 金属材料疲劳试验数据统计方案与分析方法[S]. 北京: 中国标准出版社,2009.

[16] Huang X G. Mechanism study of pit evolution and crack propagation for corrosion fatigue[D]. Shanghai: Shanghai Jiaotong University, 2013. (in Chinese) 黄小光. 腐蚀疲劳点蚀演化与裂纹扩展机理研究[D]. 上海: 上海交通大学, 2013.

[17] Liu D X. Corrosion and protection of materials[M]. Xi'an: Northwestern Polytechnical University Press, 2006: 185-186. (in Chinese) 刘道新. 材料的腐蚀与防护[M]. 西安: 西北工业大学出版社, 2006: 185-186.

Corrosion Fatigue Behavior of 7075 Aluminum Alloy in Saline Water Environment at Different Temperatures

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Mei ZHENG, Lijuan FENG, Na QIN, Jinge YIN. 3D computational method for conjugate heat transfer between internal and external flow of nacelle anti-icing system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627425-627425.
[2]	Kai LUO, Qiu WANG, Jinping LI, Wei ZHAO. Magnetohydrodynamic flow control of double-cone under high temperature real gas effect [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 76-88.
[3]	Jiahong NIU, Haonan JIA, Fajun YI, Zujun PENG, Wei CHEN. Low-pressure thermal stability and high-temperature electrical conductivity of dense amorphous SiCN [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 152-159.
[4]	FAN Yongsheng, YANG Xiaoguang, SHI Duoqi, TAN Long, HUANG Weiqing. Rafting-waste judgement of serviced turbine blades: quantitative characterization and threshold determination [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625100-625100.
[5]	LIU Qingyang, LEI Juanmian, LIU Zhou, SHI Lei, ZHOU Weijiang. γ-Re_θt-f_Re transition model for compressible flow [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 125794-125794.
[6]	LI Dingjun, YANG Liuyu, SUN Fan, JIANG Peng, CHEN Yiwen, WANG Tiejun. Effect of preheating temperature on formation of surface cracks in thermal barrier coating system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526184-526184.
[7]	CHEN Keming, TIAN Ruozhou, GUO Sujuan, WANG Runzi, ZHANG Chengcheng, CHEN Haofeng, ZHANG Xiancheng, TU Shandong. Creep fatigue life prediction of aero-engine turbine disc under cyclic thermal load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 225290-225290.
[8]	YANG Guang, LIU Xuedong, WANG Congwei, WANG Congyu, LIU Dazhi. SLM element burning behavior of magnesium alloy based on temperature field simulation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525639-525639.
[9]	PENG Zhenlong, ZHANG Xiangyu, ZHANG Deyuan. High-speed ultrasonic vibration cutting for difficult-to-machine materials in aerospace field [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525587-525587.
[10]	ZHENG Kai, RAO Wei, XIANG Yanchao, ZHANG Dong, ZHANG Bingqiang, XUE Shuyan, DAI Chenghao, YE Qing. Design of aerogel-based thermal protector for Mars landing engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 626568-626568.
[11]	YUE Bo, XU Yingjie, XU Ningxin, ZHANG Weihong. Topology optimization of frame mold for autoclave process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 425141-425141.
[12]	WANG Lei, MAO Junkui, WANG Longfei, PAN Jin, QIU Changbo, YE Dahai, CAI Kexin. Influence of labyrinth seal volume packing effect on transient characteristics of disc cavity air system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 124989-124989.
[13]	LI Xinqing, ZHAO Qinghai, LONG Kai, ZHANG Hongxin. Topology optimization of periodic multi-material heat conduction structures considering transient effects [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 425964-425964.
[14]	SUN Dan, LI Hao, ZHAO Huan, ZHANG Guochen, LI Yu, FENG Yuzhong. Numerical and experimental study of frictional thermal effects of brush seals [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 425973-425973.
[15]	LIU Pengxin, YUAN Xianxu, SUN Dong, FU Yalu, LI Chen. Direct numerical simulation of high-temperature turbulent boundary layer with chemical nonequilibrium [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(1): 124877-124877.