| [1] |
Hongliang ZHAO, Wenqiang ZHANG, Jiahui QIU, Min ZHANG, Juan DU, Chaoqun NIE.
Unsteady simulation of stall process in transonic compressor with total temperature distortion
[J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628319-628319.
|
| [2] |
WANG Xiao, CHENG Jianhui, SHEN Tianrong, XU Baocheng, MENG Xuan.
Numerical simulation research of influence of wake flow field on inlet temperature field of carrier-based aircraft
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(8): 525795-525795.
|
| [3] |
SHI Lin, HAN Ning, SONG Xiangjun, WANG Libing, CUI Donghui.
Bistatic ISAR imaging algorithm based on virtual slow time
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(5): 322683-322683.
|
| [4] |
GUO Baofeng, SUN Huixian, HU Wenhua, YIN Wenlong, CHEN Guanjun.
Rotation center estimation of bistatic ISAR in presence of time-varying bistatic angle
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(3): 322432-322432.
|
| [5] |
DUAN Xupeng, SUN Weiping, WEI Meng, YANG Yong.
Numerical simulation of amphibious aircraft taxiing at high speed on water using OpenFOAM
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(1): 522330-522330.
|
| [6] |
XU Jianhua, LI Kai, SONG Wenping, YANG Xudong.
Influence of co-flow jet key parameters on airfoil aerodynamic performance at low Reynolds number
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(8): 122018-122018.
|
| [7] |
SU Dacheng, SHI Yongjie, XU Guohua, ZONG Kun.
Numerical simulatin of coupled flow field of helicopter/ship
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(7): 520853-520853.
|
| [8] |
WANG Zhiqiang, SHEN Xigang, HU Jun.
Prediction and evaluation of aerodynamic stability of high bypass ratio turbofan engine deployed with thrust reverser
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(2): 120192-120202.
|
| [9] |
XU Zhulin, DA Xingya, FAN Zhaolin.
Assessment of swirl distortion of serpentine inlet based on five-hole probe
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(12): 121342-121342.
|
| [10] |
LU Laixiao, SUN Jie, HAN Xiong, XIONG Qingchun, SONG Ge.
Load prediction method of rolling distortion correction for monolithic aeronautical components based on energy theory
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(12): 421326-421326.
|
| [11] |
YU Jianhua, CHEN Zhitong.
A control method of machining distortion using adaptive fixture with dual-arm
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(5): 1657-1665.
|
| [12] |
LI Zhiping, WANG Mengqi.
Airworthiness certification method for aeroengine on stall and surge with inlet distortion
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(9): 2947-2957.
|
| [13] |
DONG Xu, LIU Xiaohua, SUN Dakun, SUN Xiaofeng.
Experimental Investigation of Stall Margin Enhancement Using Novel Casing Treatment Under the Rotating Inlet Distortion
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(9): 2411-2425.
|
| [14] |
YANG Lin, CHEN Lei, SUN Hai, YANG Mingsui.
Investigation of Counter Rotating Fan Design Technology
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(5): 1226-1235.
|
| [15] |
YANG Yinfei, ZHANG Zheng, LI Liang, HE Ning, ZHAO Wei.
Numerical Simulation and Test of Bulk Residual Stress and Machining Distortion in Aluminum Alloy 7085
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(2): 574-581.
|