飞机设计域向工装域映射机理研究

Abstract

Abstract:

The mechanisms of mapping between product design, process planning, and tooling design are studied to improve the efficiency and response speed of aircraft collaborative design for an aircraft manufacturing enterprise. Firstly, according to enterprise demand, information constitutions of product design domain, process planning domain, and tooling design domain are defined. Secondly, organic connections between the three are built, and a hierarchical mapping model based on polychromatic sets is constructed. Then, the modeling principle and flow of the model are given, thus the mapping in feature from product design to tooling concept design is realized. Finally, related design software is developed and applied to the assembly process planning and tooling concept design of a cabin door frame, which establishes the theoretical and practical foundation for the integration of the three in an aircraft manufacturing enterprise.

Key words: aircraft assembly, feature mapping, polychromatic set, process planning, tooling design, collaborative design

CLC Number:

JIN Jiangyan, HUANG Xiang, LU Hu, LI Shuanggao. Research on Mapping Mechanism from Product Design to Tooling Concept Design for Aircraft[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(12): 2330-2337.

References

[1] Zhou Q Z, Fan Y Q. Application of MBD on airplane manufacturing. Aviation Maintenance and Engineering, 2008(3): 55-57. (in Chinese) 周秋忠, 范玉青. MBD技术在飞机制造中的应用. 航空维修与工程, 2008(3): 55-57.

[2] Yu Y, Tao J, Fan Y Q. Assembly technology and process of Boeing 787 jet. Aeronautical Manufacturing Technology, 2009 (4): 44-49. (in Chinese) 于勇, 陶剑, 范玉青. 波音787飞机装配技术及其装配过程. 航空制造技术, 2009(4): 44-49.

[3] Zhang K, Fan Y Q, Lu H, et al. Assembly process data management based on digital definition technology. Mechanical Engineer, 2009(1): 55-58. (in Chinese) 张魁, 范玉青, 卢鹄, 等. 基于MBD制造体系的装配工艺数据集成. 机械工程师, 2009(1): 55-58.

[4] Liu Z C, Meng B, Fan Y Q. Definition & application of digital master tooling in aircraft manufacturing. Computer Integrated Manufacturing Systems, 2007,13(9): 1852-1857. (in Chinese) 刘志存, 孟飙, 范玉青. 飞机制造中数字化标准工装的定义与应用. 计算机集成制造系统, 2007, 13(9): 1852-1857.

[5] Zhou Q Z, Fan Y Q. Digital coordination method for aircraft based on digital master tooling. Computer Integrated Manufacturing Systems, 2004, 14(4): 683-689. (in Chinese) 周秋忠, 范玉青. 基于数字标工模型的飞机数字化协调方法. 计算机集成制造系统, 2004, 14(4): 683-689.

[6] Pan Z Y, Huang X, Li Y G. Variant design method for assembly tooling design based on aircraft product structure change. Acta Aeronautica et Astronautica Sinica, 2009, 30(5): 959-965. (in Chinese) 潘志毅, 黄翔, 李迎光. 基于飞机产品结构更改的装配工装变型设计方法. 航空学报, 2009, 30(5): 959-965.

[7] Zheng G L, Li W J, Wang Z J. Digital technology standard model of door frame for a large aircraft. Acta Aeronautica et Astronautica Sinica, 2010, 31(8): 1674-1679. (in Chinese) 郑国磊, 李文杰, 王自军. 某大型飞机舱门框工艺标准数字模型. 航空学报, 2010, 31(8): 1674-1679.

[8] Fan Y Q. Manufacturing technology of modern aircraft. Beijing: Beijing University of Aeronautics and Astronautics Press, 2001. (in Chinese) 范玉青. 现代飞机制造技术. 北京: 北京航空航天大学出版社, 2001.

[9] Aviation Manufacturing Engineering Handbook Chief Editorial Board. Aviation manufacturing engineering handbook: aircraft assembly. Beijing: Aviation Industry Press, 2010. (in Chinese) 航空制造工程手册总编委会. 航空制造工程手册:飞机装配. 北京: 航空工业出版社, 2010.

[10] Pavlov V V. Polychromatic sets and graphs for CALS. Moscow: Stankin Press, 2000.(in Russian)

[11] Li Z B. The research and application of polychromatic sets in advanced manufacture. Beijing: China WaterPower Press, Intellectual Property Publishing House, 2005. (in Chinese) 李宗斌. 先进制造中多色集合理论的研究及应用. 北京:中国水利水电出版社, 知识产权出版社, 2005.

[12] Li Z B, Xu L D. Polychromatic sets and its application in simulating complex objects and systems. Computers & Operations Research, 2003, 30(6): 851-860.

[13] Li S C, Li Z B, Tang F M. Conceptual design of machining center by using polychromatic sets theory. Chinese Journal of Mechanical Engineering, 2004, 40(6): 118-122. (in Chinese) 李善仓, 李宗斌, 唐凤鸣. 应用多色集合理论完成加工中心的概念设计. 机械工程学报, 2004, 40(6): 118-122.

[14] Gao X Q, Li Z B, Zhao S S. Study on modeling and reasoning technology of conceptual design based on polychromatic sets. China Mechanical Engineering, 2006, 17(3): 255-259. (in Chinese) 高新勤, 李宗斌, 赵姗姗. 基于多色集合理论的概念设计建模和推理技术研究. 中国机械工程, 2006, 17(3): 255-259.

[15] Zou G M, Wang X L, Hu Y J, et al. Construction of conceptual product’s design information relations network and its representation. Computer Integrated Manufacturing Systems, 2006, 12(3): 352-363. (in Chinese) 邹光明, 王学林, 胡于进, 等. 概念产品设计信息关系网的构造与表示. 计算机集成制造系统, 2006, 12(3): 352-363.

[16] Zhang B, Li Z B. Modeling of tolerance information and reasoning technique study using polychromatic sets. Chinese Journal of Mechanical Engineering, 2005, 41(10): 111-116. (in Chinese) 张博, 李宗斌. 采用多色集合理论的公差信息建模与推理技术. 机械工程学报, 2005, 41(10): 111-116.

[17] Chen P, Li Z B, Yang X C, et al. Stamping process planning of automobile panels by using modeling technology. Computer Integrated Manufacturing Systems, 2010, 16(11): 2435-2442. (in Chinese) 陈鹏, 李宗斌, 杨晓春, 等. 汽车覆盖件冲压工艺规划建模技术. 计算机集成制造系统, 2010, 16(11): 2435-2442.

[18] Sun X W, Chu X N, Zhang Z F, et al. Location datum of reasoning technique for mechanical part based on polychromatic sets. Computer Integrated Manufacturing Systems, 2007, 13(12): 2463-2467. (in Chinese) 孙习武, 褚学宁, 张在房, 等. 基于多色集合理论的定位基准选择推理技术. 计算机集成制造系统, 2007, 13(12): 2463-2467.

[19] Liu Y, Li Y, Li S J, et al. Reconfiguration method of agile manufacturing system using polychromatic sets. Computer Integrated Manufacturing Systems, 2010, 16(1): 76-80.(in Chinese) 刘永, 李言, 李淑娟, 等. 基于多色集合的敏捷制造系统重构方法. 计算机集成制造系统, 2010, 16(1): 76-80.

[20] Zhang B, Zhang H T, Zhao S S, et al. Product assembly planning modeling and algorithm based on polychromatic sets. Journal of Xi’an Jiaotong University, 2005, 39(11): 1254-1258. (in Chinese) 张博, 张洪涛, 赵姗姗, 等. 基于多色集合理论的产品装配规划建模与算法研究. 西安交通大学学报, 2005, 39(11): 1254-1258.

[21] Pan Z Y, Huang X, Li Y G. Product design process planning method based on synchronous mapping from directed graph to design structure matrix and polychromatic sets. Computer Integrated Manufacturing Systems, 2008, 14(7): 1274-1280. (in Chinese) 潘志毅, 黄翔, 李迎光. 有向图向设计结构矩阵与多色集合同步映射的设计过程规划方法. 计算机集成制造系统, 2008, 14(7): 1274-1280.

[22] Li Z B, Gao X Q, Zhao L P. Based on polychromatic sets theory for information modeling and optimization. Beijing: Science Press, 2010. (in Chinese) 李宗斌, 高新勤, 赵丽萍. 基于多色集合理论的信息建模与优化技术. 北京: 科学出版社, 2010.

Research on Mapping Mechanism from Product Design to Tooling Concept Design for Aircraft

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Haifeng WANG. Key technologies in collaborative airframe⁃engine design for high performance fighters [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(5): 529978-529978.
[2]	Xiaoxu HE, Pei LEI, Deng PAN, Yang YANG, Xiankun LI, Zhenbo DENG. Posture and position computing method for aircraft component based on PSO and WSVD [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(7): 427162-427162.
[3]	Yingke YANG, Dongsheng LI, Liheng SHEN, Rupeng LI, Yunong ZHAI. Pose and shape adjustment method for CFRP fuselage panel based on multi-robot collaboration [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 428006-428006.
[4]	JING Tao, TIAN Xitian. Multi-objective optimization method for aircraft tolerance allocation based on Monte Carlo-adaptive differential evolution algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 425278-425278.
[5]	SUN Xiaojian, LUO Mingqiang, ZHANG Chi, GUAN Ruoxi, LIU Hu. Construction technology of authoritative source of truth for civil aircraft pre-research [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 224222-224222.
[6]	SHI Xunlei, ZHANG Jiwen, LIU Shuntao, CHEN Ken. Correction strategy for hole positions based on Kriging interpolation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(9): 423499-423499.
[7]	SHI Zhanghu, HE Xiaoxu, ZENG Debiao, LEI Pei. Error compensation method for mobile robot positioning based on error similarity [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 424105-424105.
[8]	CHEN Wenliang, PAN Guowei, WANG Min. High precision positioning method for aircraft fuselage panel based on force/position control [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(2): 522403-522403.
[9]	PAN Guowei, CHEN Wenliang, WANG Min. A review of parallel kinematic mechanism technology for aircraft assembly [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(1): 522572-522572.
[10]	CHEN Changyu, HE Wenxing, YI Wangmin, HE Qian, XU Botao, LIU Zhibin. Digital configuration management method for spacecraft assembly [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(S1): 722206-722206.
[11]	HE Xiaoxu, TIAN Wei, ZENG Yuanfan, LIAO Wenhe, XIANG Yong. Robot positioning error and residual error compensation for aircraft assembly [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(4): 420538-420538.
[12]	HAN Feng, TIAN Wei, LIAO Wenhe, ZHANG Xuan, WANG Lifeng. Normal posture adjustment algorithm for lightweight auto-crawling drilling and riveting system based on parallel mechanism [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(6): 2083-2090.
[13]	HAN Feiyan, ZHANG Dinghua, ZHANG Ying, WU Baohai. A method of generate intermediate process models for casing parts based on virtual control surface constraints [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(10): 3465-3474.
[14]	LIU Shenglan, LUO Zhiguang, TAN Gaoshan, YE Nan, ZHANG Liyan. 3D Measurement and Quality Evaluation for Complex Aircraft Assemblies [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(2): 409-418.
[15]	QU Weiwei, DONG Huiyue, KE Yinglin. Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2011, 32(10): 1951-1960.