气囊硬度对固化后帽型长桁厚度的影响

doi:10.7527/S1000-6893.2018.22667

ACTA AERONAUTICAET ASTRONAUTICA SINICA ›› 2019, Vol. 40 ›› Issue (6): 422667-422667.doi: 10.7527/S1000-6893.2018.22667

• Material Engineering and Mechanical Manufacturing • Previous Articles Next Articles

Effect of airbag hardness on thickness of hat-shaped stringer

MA Cheng¹, ZHAO Cong¹, LIU Xingyu², ZHANG Jianbao³, WANG Xianfeng¹

1. College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
2. Shanghai Aircraft Design and Research Institute, Shanghai 201210, China;
3. Aerospace Materials and Technology Research Institute, China Academy of Launch Vehicle Technology, Beijing 100076, China

Received:2018-09-11 Revised:2018-10-15 Online:2019-06-15 Published:2018-12-24
Supported by:
China Academy of Launch Vehicle Technology Funds Project(F19171246); the Priority Academic Program Development of Jiangsu Higher Education Institutions; China Postdoctoral Science Foundation(2018M642250); Jiangsu Planned Projects for Postdoctoral Research Funds(2018K064C)

Abstract

Abstract: To obtain the hat-stiffened stringer wall plate with high quality, the forming method of vacuum bag core mould is improved. This paper presents a method to combine the silicon rubber core module with the vacuum core module, obtaining the hat-shaped stringer wall plate with high surface quality. It meets the requirement of dimension accuracy of composite hat-shaped stringers-skin with co-curing molding. Using the finite element simulation method, this paper studies the influence of the size of silicon rubber core mould and the properties of silicon rubber material on the thickness uniformity of stringer. The results show that the harder the core mold is, the less uniform the stringer is. The accuracy of the theoretical analysis is verified by the stringer thickness obtained under different conditions. Taking the influence of silicone rubber hardness on the uniformity of stringer dimension and process operation into consideration, finally, 50HA is selected as the hardness of the silicon rubber, and the measured average thickness of the skin-stringer deviates less than 6% from the theoretical thickness. The microanalysis shows that the fiber trend of the connection between skin and hat-shaped stringer has no deformation.

Key words: wall plate with hat-stiffened, co-curing molding, silicon rubber core mould, thickness uniformity, dimensional stability

CLC Number:

V260.6

MA Cheng, ZHAO Cong, LIU Xingyu, ZHANG Jianbao, WANG Xianfeng. Effect of airbag hardness on thickness of hat-shaped stringer[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 422667-422667.

References

[1] 肖军, 李勇, 李建龙. 自动铺放技术在大型飞机复合材料结构件制造中的应用[J]. 航空制造技术, 2008(1):50-51. XIAO J, LI Y, LI J L. The application of automatic laying technology in the manufacture of large aircraft composite structural parts[J]. Aeronautical Manufacturing Technology, 2008(1):50-51(in Chinese).
[2] 杜芳静, 王亮. 复合材料长桁终止端设计[J]. 沈阳航空航天大学学报, 2016, 33(2):36-37. DU F J, WANG L. Composite stringer runout design[J]. Journal of Shenyang Aerospace University, 2016, 33(2):36-37(in Chinese).
[3] 罗辑, 辛朝波, 顾轶卓, 等. 热膨胀工艺硅橡胶芯模对复合材料圆管成型的影响[J]. 复合材料学报, 2012, 29(2):40-45. LUO J, XIN C B, GU Y Z, et al. Effect of thermal expansion process silicon rubber core mould on circular tube formation of composite materials[J]. Acta Materiae Compositae Sinica, 2012, 29(2):40-45(in Chinese).
[4] DONG O K, KEUM S W, LEE J H, et al. Thermally- expandable elastomer molding process for thermoset composite materials[J]. Composites Part Applied Science & Manufacturing, 2006, 37(11):2121-2127.
[5] 刘钧, 彭超义, 杜刚, 等. 膨胀芯模法制备炭/环氧主承力管件研究[J]. 材料工程, 2007, 25(9):37-41. LIU J, PENG C Y, DU G, et al. Fabricating carbon/epoxy primary-load bearing cylinders by thermal expansion mould method[J]. Journal of Materials Engineering, 2007, 25(9):37-41(in Chinese).
[6] 尹昌平, 刘钧, 刘卓峰, 等. 用于RTM工艺的软模材料的工艺性能[J]. 纤维复合材料, 2006, 23(1):3-5. YIN C P, LIU J, LIU Z F, et al. Study on the thermal expansion properties of flexible mold material for RTM process[J]. Fiber Composites, 2006, 23(1):3-5(in Chinese).
[7] 卢鑫, 孙志杰, 李超, 等. 硅橡胶热膨胀工艺预浸料铺层内树脂压力变化规律[J]. 复合材料学报, 2011, 28(3):50-55. LU X, SUN Z J, LI C, et al. The change law of resin pressure in the prepreg layer of silicone rubber thermal expansion process[J]. Acta Materiae Compositae Sinica, 2011, 28(3):50-55(in Chinese).
[8] 蒲永伟, 湛利华. 航空先进复合材料帽型加筋构件制造关键技术探究[J]. 航空制造技术, 2015, 473(4):78-81. PU Y W, ZHAN L H. Research on the key technology of manufacturing the cap type stiffener of aviation advanced composite materials[J]. Aeronautical Manufacturing Technology, 2015, 473(4):78-81(in Chinese).
[9] 曹晓明, 顾轶卓, 李超, 等. 碳纤维复合材料方管硅橡胶热膨胀成型工艺研究[J]. 玻璃钢/复合材料, 2012(6):64-68. CAO X M, GU Y Z, LI C, et al. Study on thermal expansion forming process of square tube silicon rubber of carbon fiber composite material[J]. Fiber Reinforced Plastics/Composites, 2012(6):64-68(in Chinese).
[10] 夏景云. 复合材料硅橡胶膨胀加压成型模具的设计与制造[J]. 玻璃钢/复合材料, 2015(5):81-84. XIA J Y. Design and manufacture of silica rubber pressure mold for composite manufacturing[J]. Fiber Reinforced Plastics/Composites, 2015(5):81-84(in Chinese).
[11] 靳武刚, 高建军, 吴利英. 热膨胀成型工艺应用于碳纤维复合材料[J]. 现代塑料加工应用, 2003, 15(1):19-21. JIN W G, GAO J J, WU L Y. Thermal expansion molding process is applied to carbon fiber composites[J]. Modern Plastics Processing and Applications, 2003, 15(1):19-21(in Chinese).
[12] 张钟. 热膨胀模压法成型复合材料夹层结构工艺及其性能研究[D]. 南京:南京航空航天大学, 2007:29-39. ZHANG Z. Research on the process and properties for foam core sandwich with thermal expansion molding[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2007:29-39(in Chinese).
[13] 马刚, 唐文峰. 民用航空含Ω型长桁复合材料加筋壁板制造技术研究[J]. 航空制造技术, 2017, 60(12):74-77. MA G, TANG W F. Study on manufacturing technology of Ω type stiffened panel of civil aviation[J]. Aeronautical Manufacturing Technology, 2017, 60(12):74-77(in Chinese).
[14] 黄雨霓. 复合材料帽型长桁稳定性研究[J]. 科技视界, 2018,19(1):24-27. HUANG Y N. Research on the stability of composite omega stringer[J]. Science & Technology Vision, 2018, 19(1):24-27(in Chinese).
[15] 吴承思. 复合材料帽型长桁承载能力研究[J]. 装备制造技术, 2016(2):155-158. WU C S. Research on carrying capacity of composite map stringer[J]. Equipment Manufacturing Technology, 2016(2):155-158(in Chinese).
[16] 吴承思, 李穆生. 复合材料帽型长桁末端结构研究[J]. 纤维复合材料, 2014(2):22-25. WU C S, LI M S. Research on composite map stringer bottom[J]. Fibrous Composite, 2014(2):22-25(in Chinese).
[17] 荣海波. 复合材料长桁压缩稳定性方法研究[J]. 科技创新与应用, 2017(14):33-34. RONG H B. Study on compression stability of composite stringer[J]. Technological Innovation and Application, 2017(14):33-34(in Chinese).
[18] 葛东云, 莫与明, 何柏灵, 等. 复合材料帽型加筋板轴压试验及承载能力预测[J]. 复合材料学报, 2016, 33(7):1531-1539. GE D Y, MO Y M, HE B L, et al. Test and ultimate load capacity prediction of hat-stiffened composite panel under axial compression[J]. Acta Materiae Compositae Sinica, 2016, 33(7):1531-1539(in Chinese).
[19] 仲晓春, 宛静, 肖军. 橡胶绝热层的热膨胀成型工艺[J]. 宇航材料工艺, 2009, 39(3):61-63. ZHONG X CH, WAN J, XIAO J. Thermal expansion molding process of rubber insulation[J]. Aerospace Materials & Technology, 2009, 39(3):61-63(in Chinese).
[20] 金晶, 梁伟阁, 张振山. 橡胶隔振圈的结构刚度性能[J]. 海军工程大学学报, 2013, 25(5):43-44. JIN J, LIANG W G, ZHANG Z S. Performance analysis of structure stiffness of rubber isolator ring[J]. Journal of Naval Engineering University, 2013, 25(5):43-44(in Chinese).

Effect of airbag hardness on thickness of hat-shaped stringer

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics

Comments