导航

ACTA AERONAUTICAET ASTRONAUTICA SINICA ›› 2015, Vol. 36 ›› Issue (9): 2815-2827.doi: 10.7527/S1000-6893.2015.0172

• Special Column of Aviation Guided Weapons • Previous Articles     Next Articles

Infrared radiation scene generation technology based on resistor array

GAO Hui1, ZHAO Songqing1,2, WU Genshui1,2, CHEN Haiyan1, ZHAO Xishuai1   

  1. 1. Department of Guidance & Control System, China Airborne Missile Academy, Luoyang 471009, China;
    2. Aviation Key Laboratory of Science and Technology on Airborne Guided Weapons, Luoyang 471009, China
  • Received:2015-01-16 Revised:2015-06-07 Online:2015-09-15 Published:2015-06-16

Abstract:

According to the requirements of the infrared radiation imaging guidance hardware-in-the-loop simulation test, the technology of infrared radiation image generation was researched. The infrared image generation technology based on visible light modulation method was developed, including scene modeling, infrared radiation character of target and scene analysis. Meanwhile, the airplane, terrain and the infrared decoy modeling technology were discussed, and the method of infrared radiation scene generation was consummated. As the input information of the resistor array, the infrared radiation scene data, which was generated by the technology discussed in the paper, can drive the resistor array generate the infrared radiation scene. The infrared radiation scene that was detected by the infrared radiation camera, was fine and close to the reality, which can provide more accurate environment for infrared radiation imaging guidance hardware-in-the-loop simulation test.

Key words: hardware-in-the-loop simulation, infrared radiation texture generation, infrared radiation scene modeling, target and decoy modeling, resistor array

CLC Number: