锂离子电池发展现状及其前景分析

doi:10.7527/S1000-6893.2014.0166

Abstract

Abstract:

With the progress of globalization and the increasing demand of energy, people are focusing on developing novel devices for energy storage. Compared with other storage batteries, lithium-ion battery (LIB) is a kind of chemical power sources with the best comprehensive performances, such as high specific energy, long cycle life, small volume, light weight, non-memory, and environment friendly, etc. LIB is widely applied to information technology, electric vehicles & hybrid-electric vehicles, aeronautics & astronautics, etc. The key point of LIB technology and industry are the development of novel lithium-storage materials and electrolyte materials. In this work, by analyzing the technology and industrialization of LIB as well as its application, especially in aeronautics, it is concluded that LIB industry in China has been dramatically developed. However, there are still many problems and weakness in the industry comparing to international advanced level, it is required to develop suitable LIB system and improve the manufacturing technology.

Key words: lithium-ion batteries, cathode materials, anode materials, electrolyte, aeronautics and astronautics

CLC Number:

YAN Jinding. Current Status and Development Analysis of Lithium-ion Batteries[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(10): 2767-2775.

References

[1] Huang K L, Wang Z X, Liu S Q. The principle and key technology of lithium ion batteries[M]. Beijing: Chemical Industry Press, 2008: 1-10. (in Chinese) 黄可龙, 王兆翔, 刘素琴. 锂离子电池原理与关键技术[M]. 北京: 化学工业出版社, 2008: 1-10.
[2] Padhi A K, Nanjundaseamy K S, Goodenough J B. Phospho-olivnes as positive electrode materials for rechargeable lithium batteries[J]. Journal of the Electrochemical Society, 1997, 144(4): 1188-1194.
[3] Nanjundaseamy K S, Padhi A K, Goodenough J B, et al. Synthesis redox potential evaluation and electrochemical characteristic of NASICON-related-3D framework compounds[J]. Solid State Ionics, 1996, 92(1-2): 1-10.
[4] Shi Z C, Yang Y. Progress in polyanion-type cathode materials for lithium ion batterires[J]. Progress in Chemistry, 2005, 17(4): 604-613. (in Chinese) 施志聪, 杨勇. 聚阴离子型锂离子电池正极材料研究进展[J]. 化学进展, 2005, 17(4): 604-613.
[5] Thomas M G, Bruce P G, Goodenough J B. Lithium mobility in the layered oxide Li_1-xCoO₂[J]. Solid State Ionics, 1985, 1(1): 13-19.
[6] Wu Y P, Dai X B, Ma J Q, et al. Lithium ion batteries: application and practice[M]. Beijing: Chemical Industry Press, 2004: 32-45. (in Chinese) 吴宇平, 戴晓兵, 马军旗, 等. 锂离子电池——应用与实践[M]. 北京: 化学工业出版社, 2004: 32-45.
[7] Jang Y I, Chiang Y M. Stability of the monoclinic and orthorhombic, phases of LiMnO₂ with temperature, oxygen partial ressure, and Al doping[J]. Solid State Ionics, 2000, 130(1): 53-59.
[8] Storey C, Kargina I, Grincourt Y, et al. Electrochemical characterization of a new high capacity cathode[J]. Journal of Power Sources, 2001, 97-98: 541-544.
[9] Armstrong A R, Robertson A D, Bruce P G. Structural transformation on cycling layered Li(Mn_1-yCo_y)O₂ cathode materials[J]. Electrochimica Acta, 1999, 45(1-2): 285-294.
[10] Xu M F, Li X H, Zhang Y H, et al. Synthesis and modification of layered LiMnO₂[J]. Chinese Journal Power Sources, 2003, 27(4): 366-369. (in Chinese) 许名飞, 李新海, 张云河, 等. 层状锰酸锂的制备及改性[J]. 电源技术, 2003, 27(4): 366-369.
[11] Jiang J B, Du K, Cao Y B, et al. Synthesis of spherical LiMn₂O₄ with Mn₃O₄ and its electrochemistry performance[J]. Journal of Alloys and Compounds, 2013, 577(1): 138-142.
[12] Zhao S, Bai Y, Ding L H, et al. Enhanced cycling stability and thermal stability of YPO₄-coated LiMn₂O₄ cathode materials for lithium ion batteries[J]. Solid State Ionics, 2013, 247(1): 22-29.
[13] Fan C L, Han S C, Li L F, et al. Structure and electrochemical performances of LiFe_1-2xTi_xPO₄C cathode doped with high valence Ti⁴⁺ by carbothermal reduction method[J]. Journal of Alloys and Compounds, 2013, 576(1): 18-23.
[14] Kim T H, Park J S, Chang S K, et al. The current move of lithium ion batteries towards the next phase[J]. Advanced Energy Materials, 2012, 2(7): 860-972.
[15] Mochida I, Ku C H, Korai Y. Anodic performance and insertion mechanism of hard carbons prepared from synthetic isotropic pitches[J]. Carbon, 2001, 39(3): 399-410.
[16] Winter M, Besenhard J O. Electrochemical lithiation of tin and tin-based intermetallics and composites[J]. Electrochimica Acta, 1999, 45(1-2): 31-50.
[17] Feng C Q, Ma J, Li H, et al. Synthesis of molybdenum disulfide (MoS₂ ) for lithium ion battery applications[J]. Materials Research Bulletin, 2009, 44(9): 1811-1815.
[18] Apostolova R, Shembel D, Talyosef I, et al. Study of electrolytic cobalt sulfide Co₉S₈ as an electrode material in lithium accumulator prototypes[J]. Russian Journal of Electrochemistry, 2009, 45(3): 311-319.
[19] Chan C K, Ruffo R, Hong S S, et al. Structural and electrochemical study of the reaction of lithium with silicon nanowires[J]. Journal of Power Sources, 2009, 189(1): 34-39.
[20] Xiang J Y, Tu J P, Wang X L, et al, Electrochemical performances of nanostructured Ni₃P-Ni films electrodeposited on nickel foam substrate[J]. Journal of Power Sources, 2008, 185(1): 519-525.
[21] Choi J W, Cheruvally G, Ahn H J, et al. Electrochemical characteristics of room temperature LiFeS₂ batteries with natural pyrite cathode[J]. Journal of Power Sources, 2006, 163(1): 158-165.
[22] Hu Y S, Kienle L, Guo Y G, et al. High lithium electroactivity of nanometer-sized rutile TiO₂[J]. Advanced Materials, 2006, 18(11): 1421-1426.
[23] Vincent C A, Lithium batteries: a 50-year perspective, 1959—2009[J]. Solid State Ionics, 2000, 134(1-2): 159-167.
[24] Choi Z, Kramer D, Monig R. Correlation of stress and structural evolution in Li₄Ti₅O₁₂-based electrodes for lithium ion batteries[J]. Journal of Power Sources, 2013, 240: 245-251.
[25] Li Z D, Zhang Y C, Xiang H F, et al. Trimethyl phosphite as an electrolyte additive for high-voltage lithium-ion batteries using lithium-rich layered oxide cathode[J]. Journal of Power Sources, 2013, 240: 471-475.
[26] Morimoto H, Awano H, Terashima J, et al. Preparation of lithium ion conducting solid electrolyte of NASICON-type Li_1+xAl_xTi_2-x(PO₄)₃ (x=0.3)obtained by using the mechanochemical method and its application as surface modification materials of LiCoO₂ cathode for lithium cell[J]. Journal of Power Sources, 2013, 240: 636-643.
[27] Liu Z Q, Tang Y F, Wang Y M, et al. High performance Li₂S-P₂S₅ solid electrolyte induced by selenide[J]. Journal of Power Sources, 2014, 260: 264-267.
[28] Khurana R, Schaefer J L, Archer L A, et al. Suppression of lithium dendrite growth using cross-linked polyethylene/poly(ethylene oxide) electrolytes: A new approach for practical lithium-metal polymer batteries[J]. Journal of the American Chemical Society, 2014, 136(20): 7395-7402.
[29] Chiappone A, Nair J R, Gerbaldi C, et al. Nanoscale microfibrillated cellulose reinforced truly-solid polymer electrolytes for flexible, safe and sustainable lithium-based batteries[J]. Cellulose, 2013, 20(5): 2439-2449.
[30] Marczewski M J, Stanje B, Hanzu I, et al. "Ionic liquids-in-salt" -a promising electrolyte concept for high-temperature lithium batteries[J]. Physical Chemistry Chemical Physics, 2014, 16(24): 12341-12349.
[31] An P, Wang J. Application of lithium ion battery in national defense and military field[J]. Advance Materials Industry, 2006(9): 38-40. (in Chinese) 安平, 王剑. 锂离子电池在国防军事领域的应用[J]. 新材料产业, 2006(9): 38-40.
[32] Xu R. A bibliometrics analysis based on ISI Web of Knowledge data of Li-ion batteries for aerospace use[J]. Journal of Inteligence, 2013, 32(11): 28-33. (in Chinese) 徐睿. 基于ISI Web of Knowledge的航空用锂离子电池的计量[J]. 情报杂志, 2013, 32(11): 28-33.
[33] Dudley M, Misra A. Electric airplane power-system performance requirements[EB/OL]. (2009-04-24) [2014-05-28]. http://cafefoundation.org/v2/pdf_eas/2009/Michael Dudley_2009.pdf.
[34] NTSB Office of Aviation Safety. Interim factual report [EB/OL]. (2013-03-07)[2014-05-28]. http://www.ntsb.gov/investigations/2013/boeing_787/DCA13IA037%20interim%20factual%20report.pdf.
[35] Fang M, Zhao X, Chen J B, et al. A case study of Japan airlines B-787 battery fire[J]. Energy Storage Science and Technology, 2014, 3(1): 42-46. (in Chinese) 方谋, 赵骁, 陈敬波, 等. 从波音787电池事故分析大型动力电池组的安全性[J]. 储能科学与技术, 2014, 3(1): 42-46.
[36] Li L Y, Ren B. Present status of Li-ion battery industry in China and its worldwide applications[J]. Chinese Journal of Power Sources, 2013, 37(5): 883-885. (in Chinese) 李凌云, 任斌. 我国锂离子电池产业现状及国内外应用情况[J]. 电源技术, 2013, 37(5): 883-885.

Current Status and Development Analysis of Lithium-ion Batteries

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 4

Recommended Articles

Metrics

Comments

[1]	WANG Guoqian, LI Hansong, HAN Guofeng, LI Ruoqi, ZHANG Yan. Through-mask electrochemical machining technology of periodic reversing electrolyte flow [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525575-525575.
[2]	YANG Tao, ZENG Yongbin, HANG Yusen, FANG Xiaolong. Inner-jet electrochemical cutting of mortise structure by tube electrode immersed in electrolyte [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525588-525588.
[3]	CHEN Yueliang, HUANG Hailiang, BIAN Guixue, ZHANG Yong, WANG Chenguang, WANG Andong. Test and simulation of effects of multi-electrode coupling on atmospheric corrosion of metals [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(6): 421751-421751.
[4]	Chen Haining;Xing Yalan;Li Zhe;Zhu Liqun. Effect of SiO₂ Sol on Performance of Electrodeposited Zinc Electrodes [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2009, 30(6): 1150-1155.