材料工程与机械制造

超磁致伸缩电静液作动器的试验研究与特性分析

  • 杨旭磊 ,
  • 朱玉川 ,
  • 纪良 ,
  • 费尚书 ,
  • 郭亚子
展开
  • 南京航空航天大学 机电学院, 南京 210016
杨旭磊 男, 硕士研究生。 主要研究方向: 智能材料及其结构, 电液伺服控制技术。 E-mail: qdyangxl@163.com

收稿日期: 2015-08-31

  修回日期: 2015-09-17

  网络出版日期: 2015-11-25

基金资助

国家自然科学基金(51575258);江苏省自然科学基金(BK20131359)

Experimental investigation and characteristic analysis of a giant magnetostrictive materials-based electro-hydrostatic actuator

  • YANG Xulei ,
  • ZHU Yuchuan ,
  • JI Liang ,
  • FEI Shangshu ,
  • GUO Yazi
Expand
  • College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received date: 2015-08-31

  Revised date: 2015-09-17

  Online published: 2015-11-25

Supported by

National Natural Science Foundation of China (51575258); Natural Science Foundation of Jiangsu Province (BK20131359)

摘要

超磁致伸缩材料驱动的电静液作动器具有结构高度集成、性能影响因素多以及理论分析复杂等特点,为寻求超磁致伸缩电静液作动器可靠的理论分析方法以提高其输出性能,首先搭建了超磁致伸缩执行器与作动器试验测试平台,完成了执行器与作动器动态特性对比试验,在准确测试与观察试验现象的基础上,对超磁致伸缩电静液作动器进行结构分解,以各环节固有频率为理论分析切入点,采用试验、理论与有限元分析相结合的方法,分析了悬臂梁阀片、管路、液压缸以及蓄能器等动态特性对作动器输出性能的影响规律,总结出符合试验结果的理论分析方法并确定了影响与制约作动器输出性能的关键环节,最后提出了超磁致伸缩电静液作动器优化改进方案,优化后作动器试验结果显示:在200 Hz左右、0.6 MPa 的偏压作用下,选取 0.15 mm 厚度的阀片,作动器的输出性能达到最佳,其输出流量最大可达1.2 L/min。

本文引用格式

杨旭磊 , 朱玉川 , 纪良 , 费尚书 , 郭亚子 . 超磁致伸缩电静液作动器的试验研究与特性分析[J]. 航空学报, 2016 , 37(9) : 2839 -2850 . DOI: 10.7527/S1000-6893.2015.0295

Abstract

Electro-hydrostatic actuators (EHAs) driven by giant magnetostrictive materials (GMM) have some features including highly integrated structure,lots of factors affecting the performance and complex theoretical analysis. In order to search a reliable theoretical analysis method of giant magnetostrictive materials-based electro-hydrostatic actuator (GMEHA) and improving the output performance, the experiment platform of GMA is built in this paper and contrast experiment of actuator dynamic characteristics is completed. On the basis of accurate test and observation of experimental phenomena,structure decomposition of GMEHA is done. Natural frequency of each part is set as breakthrough point of theoretical analysis. A method of combining experiments,theory and finite element analysis (FEA) is taken to analyze the effect on the output performance of actuator caused by dynamic characteristics of cantilever valve,pipeline,hydraulic cylinder and accumulator. The theory analysis method in accordance with experiment is concluded and the key part which affected and restricted the output performance of actuator is determined. Finally, the optimization scheme of GMEHA is put forward on the basis of the above theoretical and experimental researches. Experimental results of actuator after optimization show that the best output performance has been received at the frequency of about 200 Hz and the bias of 0.6 MPa with the valve of 0.15 mm thickness,and the maximum output flow can reach 1.2 L/min.

参考文献

[1] GOHARDANI A S, DOULGERIS G, SINGH R. Challenges of future aircraft propulsion: a review of distributed propulsion technology and its potential application for the all electric commercial aircraft[J]. Progress in Aerospace Sciences, 2011, 47(5): 369-391.
[2] 王占林, 陈斌. 未来飞机液压系统的特点[J]. 中国工程科学, 1999, 1(3): 5-10. WANG Z L, CHEN B. Characters of future aircraft hydraulic system[J]. Engineering Science, 1999, 1(3): 5-10 (in Chinese).
[3] SANDERS B, CROWE R, GARCIA E. Defense advanced research projects agency-smart materials and structures demonstration program overview[J]. Journal of Intelligent Material Systems and Structures, 2004, 15(4): 227-233.
[4] WAX S G, FISCHER G M, SANDS R R. The past, present, and future of DARPA's investment strategy in smart materials[J]. Journal of the Minerals, Metals and Materials Society, 2003, 55(12): 17-23.
[5] SNEED R C, SMITH R R, CASH M F, et al. Development of smart material-hydraulic pumps and actuators[C]//ASME 2006 International Mechanical Engineering Congress and Exposition. Chicago: American Society of Mechanical Engineers, 2006: 435-443.
[6] CHAUDHURI A, WERELEY N M. Compact hybrid electro-hydraulic actuators using smart materials: A review[J]. Journal of Intelligent Material Systems and Structures, 2012, 23(6): 597-634.
[7] 陈龙, 朱玉川, 杨旭磊, 等. 超磁致伸缩泵驱动磁路建模及数值分析[J]. 中国机械工程, 2014, 25(6): 718-722. CHEN L, ZHU Y C, YANG X L, et al. Driving magnetic path modeling and numerical analysis in giant magnetostrictive pump[J]. China Mechanical Engineering, 2014, 25(6): 718-722 (in Chinese).
[8] CHAUDHURI A, YOO J H, WERELEY N M. Design, test and model of a hybrid magnetostrictive hydraulic actuator[J]. Smart Materials and Structures, 2009, 18(8): 085019.
[9] RUPINSKY M J. Smart material electro-hydrostatic actuator for intelligent transportation systems [D]. Ohio: The Ohio State University, 2006: 15-23.
[10] 朱玉川, 李跃松. 射流伺服阀用放大型超磁致伸缩执行器建模与分析 [J]. 航空学报, 2014, 35(11): 3156-3165. ZHU Y C, LI Y S. Modeling and analysis for amplified giant magnetostrictive actuator applied to jet-pipe electro-hydraulic servovalve [J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(11): 3156-3165 (in Chinese).
[11] CHAUDHURI A, YOO J H, WERELEY N M, et al. Scaling-up issues with a magnetostrictive-hydraulic pump[C]//ASME 2006 International Mechanical Engineering Congress and Exposition. Chicago: American Society of Mechanical Engineers, 2006: 403-408.
[12] LI Y S, ZHU Y C, WU H T, et al. Modeling and inverse compensation for giant magnetostrictive transducer applied in smart material electrohydrostatic actuator[J]. Journal of Intelligent Material Systems and Structures, 2014, 25(3): 378-388.
[13] JOHN S, SIROHI J, WANG G, et al. Comparison of piezoelectric, magnetostrictive, and electro-strictive hybrid hydraulic actuators[J]. Journal of Intelligent Material Systems and Structures, 2007, 18(10): 1035-1048.
[14] KIM G W, WANG K W. Helmholtz resonance in a piezoelectric-hydraulic pump-based hybrid actuator[J]. Smart Materials and Structures, 2011, 20(1): 015010.
[15] LARSON J P, DAPINO M J. Design of a smart material electro-hydraulic actuator with improved frequency bandwidth[C]//SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. Florida: International Society for Optics and Photonics, 2012: 83430K-1-83430K-9.
[16] LINDLER J E, ANDERSON E H, REGELBRUGGE M E. Design and testing of piezoelectric-hydraulic actuators[C]//Smart Structures and Materials. Florida:International Society for Optics and Photonics, 2003: 96-107.
[17] CADOU C, ZHANG B. Performance modeling of a piezo-hydraulic actuator[J]. Journal of Intelligent Material Systems and Structures, 2003, 14(3): 149-160.
[18] NASSER K, VUJIC N, LEO D J, et al. Modeling and testing of a piezohydraulic actuation system[C]//SPIE's 8th Annual International Symposium on Smart Structures and Materials. Florida: International Society for Optics and Photonics, 2001: 354-365.
[19] OATES W S, LYNCH C S. Piezoelectric hydraulic pump system dynamic model[J]. Journal of Intelligent Material Systems and Structures, 2001, 12(12): 737-744.
[20] ZHAO Y P, CHEN D F, LU Q G. The development and application of smart material pumps[J]. Advanced Materials Research, 2013, 681: 260-265.
[21] XUAN Z, JIN T, SAN H N, et al. Performance of piezo-stacks for a piezoelectric hybrid actuator by experiments[J]. Journal of Intelligent Material Systems and Structures, 2014, 25(18): 2212-2220.
[22] JOHN S, CHAUDHURI A, WERELEY N M. A magnetorheological actuation system-part II: modeling[C]//ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Chicago: American Society of Mechanical Engineers, 2007: 249-259.
[23] 盛敬超. 液压流体力学[M]. 北京: 机械工业出版社, 1980: 292-304. SHENG J C. Hydro-mechanics[M]. Beijing: China Machine Press, 1980: 292-304 (in Chinese).
[24] 王春行. 液压伺服控制系统[M]. 北京: 机械工业出版社, 1981: 78-83. WANG C H. Hydraulic servo control system [M]. Beijing: China Machine Press, 1981: 78-83 (in Chinese).

文章导航

/