双臂自适应夹具加工变形控制方法
收稿日期: 2015-06-12
修回日期: 2015-07-11
网络出版日期: 2015-07-27
基金资助
国家科技重大专项(2013ZX04001051)
A control method of machining distortion using adaptive fixture with dual-arm
Received date: 2015-06-12
Revised date: 2015-07-11
Online published: 2015-07-27
Supported by
National Science and Technology Major Project (2013ZX04001051)
在叶片加工过程中,由于叶片的薄壁和曲率多变特点,易受装夹、切削力和残余应力的影响而产生弯曲、扭转变形。针对该问题,本文提出了一种双臂自适应夹具加工变形控制方法,将加工过程中产生的变形逐层消除。首先,对叶片的变形成因进行分析;然后,通过对无应力装夹和加工应力释放原理进行研究,设计了一种可提供6个自由度的自适应装夹机构,并对该机构进行了工程设计和机构分析;最后,基于这种6自由度双臂自适应装夹机构,形成了本文提出的加工变形控制工艺,不需多次修复基准和更换机床,就可以逐层消除新产生的变形。实验结果表明,采用双臂夹具自适应加工变形控制方法,可以有效控制叶片加工过程中产生的变形,使叶片的轮廓误差降为原来的50%,提高了其加工精度。
于建华 , 陈志同 . 双臂自适应夹具加工变形控制方法[J]. 航空学报, 2016 , 37(5) : 1657 -1665 . DOI: 10.7527/S1000-6893.2015.0198
Blade is easily affected by clamping, cutting force and residual stress which result in warp and torsion due to thin-walled and free surface of blade. In this paper, a new method for the control of machining distortion that eliminates surface errors by using an adaptive dual-arm fixture is presented. Firstly, the sources of distortion in different machining methods are discussed. Secondly, after the detailed analysis of unstressed fixing and stress releasing, the engineering design and mechanism analysis of the adaptive mechanism are shown. Finally, a control process of machining distortion is obtained based on the adaptive dual-arm fixture. Machining distortion can be eliminated without multiple repairing datum and changing machine. The experimental results show that the adaptive dual-arm fixture can effectively eliminate surface errors by 50% in machining, and the precision of test blade machined in this way is improved obviously.
Key words： distortion control; blade; adaptive fixture; free surface; machining distortion
[1] ZHAO C, REN Z, TANG C R, et al. The application of magnetorheological damper in machining the impeller blades of high temperature alloy[J]. Materials Science Forum, 2012, 723:358-361.
[2] 单晨伟, 赵颖, 刘维伟, 等. 一种薄壁悬臂叶片数控加工非均匀余量刚度补偿方法[J]. 航空学报, 2013, 34(3):686-693. SHAN C W, ZHAO Y, LIU W W, et al. A nonuniform offset surface rigidity compensation strategy in numerical control machining of thin-walled cantilever blades[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(3):686-693(in Chinese).
[3] SASAHARA H, OBIKAWA T, SHIRAKASHI T. Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models[J]. International Journal of Machine Tools and Manufacture, 2004, 44(7):815-822.
[4] 蔺小军, 杨艳, 吴广, 等. 面向叶片型面的五轴联动柔性数控砂带抛光技术研究[J]. 航空学报, 2015, 36(6):2074-2082. LIN X J, YANG Y, WU G, et al. The research of flexible polishing technology of five-axis NC abrasive belt for blade surface[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(6):2074-2082(in Chinese).
[5] WAN M, ZHANG W H, QIN G H, et al. Strategies for error prediction and error control in peripheral milling of thin-walled workpiece[J]. International Journal of Machine Tools and Manufacture, 2008, 48(12):1366-1374.
[6] CHEN W F, XUE J, TANG D, et al. Deformation prediction and error compensation in multilayer milling processes for thin-walled parts[J]. International Journal of Machine Tools and Manufacture, 2009, 49(11):859-864.
[7] KANG Y G, WANG Z Q. Two efficient iterative algorithms for error prediction in peripheral milling of thin-walled workpieces considering the in-cutting chip[J]. International Journal of Machine Tools and Manufacture, 2013, 73:55-61.
[8] KERSTING P, BIERMANN D. Modeling techniques for the prediction of workpiece deflections in NC milling[J]. Procedia CIRP, 2012, 2(8):83-86.
[9] WANG Y, WANG Z J, YILMAZ O, et al. Interactive fixture and tool space design considering tool movement, machine, and inspection for five-axis grinding[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2010, 224(4):543-552.
[10] RATCHEV S, LIU S, HUANG W, et al. Milling error prediction and compensation in machining of low-rigidity parts[J]. International Journal of Machine Tools and Manufacture, 2004, 44(15):1629-1641.
[11] GANG L. Study on deformation of titanium thin-walled part in milling process[J]. Journal of Materials Processing Technology, 2009, 209(6):2788-2793.
[12] WANG Y, CHEN X, GINDY N. Surface error decomposition for fixture development[J]. The International Journal of Advanced Manufacturing Technology, 2007, 31(9-10):948-956.
[13] WANG Y, CHEN X, GINDY N, et al. Elastic dis of a fixture and turbine blades system based on finite element analysis[J]. The International Journal of Advanced Manufacturing Technology, 2008, 36(3-4):296-304.
[14] WANG Y, CHEN X, LIU Q, et al. Optimisation of machining fixture layout under multi-constraints[J]. International Journal of Machine Tools and Manufacture, 2006, 46(12):1291-1300.
[15] 刘维伟, 张定华, 史耀耀, 等. 航空发动机薄壁叶片精密数控加工技术研究[J]. 机械科学与技术, 2004, 23(3):329-331. LIU W W, ZHANG D H, SHI Y Y, et al. Study on net-shape NC machining technology of thin-blade of aeroengine[J]. Mechanical Science and Technology, 2004, 23(3):329-331(in Chinese).
[16] LIU S G, ZHENG L, ZHANG D H, et al. Optimal fixture design in peripheral milling of thin-walled workpiece[J]. The International Journal of Advanced Manufacturing Technology, 2006, 28(7-8):653-658.
[17] LIU S G, ZHENG L, ZHANG D H, et al. Optimization of the number and positions of fixture locators in the peripheral milling of a low-rigidity workpiece[J]. The International Journal of Advanced Manufacturing Technology, 2007, 33(7-8):668-676.
[18] 李继博, 张定华, 吴宝海, 等. 薄壁叶片精密加工装夹方案设计与优化[J]. 中国机械工程, 2012, 23(11):1341-1344, 1349. LI J B, ZHANG D H, WU B H, et al. Study on design and optimization of clamping scheme in NC machining[J]. China Mechanical Engineering, 2012, 23(11):1341-1344, 1349(in Chinese).
[19] LIM T S, LEE C M, KIM S W, et al. Evaluation of cutter orientations in 5-axis high speed milling of turbine blade[J]. Journal of Materials Processing Technology, 2002, 130-131:401-406.
[20] MENG F J, LI X, CHEN Z T, et al. Study on the cantilever grinding process of aero-engine blade[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2014, 228(11):1393-1400.
[21] 黄真, 赵永生, 赵铁石. 高等空间机构学[M]. 北京:高等教育出版社, 2006:116-118. HUANG Z, ZHAO Y S, ZHAO T S. Advanced spatial mechanism[M]. Beijing:Higher Education Press, 2006:116-118(in Chinese).
[22] 徐飞飞. 整体薄壁结构件残余应力预测与铣削加工变形研究[D]. 大连:大连理工大学, 2010:52-53. XU F F. Study on prediction of residual stress and machining distortion for monolithic thin-walled structural components[D]. Dalian:Dalian University of Technology, 2010:52-53(in Chinese).
[23] 李明. 钛合金整体结构件加工变形规律及其微观机理的研究[D]. 青岛:青岛理工大学, 2013:24-27. LI M. Study on machining distortion law and its microscopic mechanism of monolithic component of titanium alloy[D]. Qingdao:Qingdao Technological University, 2013:24-27(in Chinese).
[24] HSU T H, LAI J Y, UENG W D. On the development of airfoil section inspection and analysis technique[J]. The International Journal of Advanced Manufacturing Technology, 2006, 30(1):129-140
/
| 〈 |
|
〉 |
CJA