航空新型静电传感器建模与标定实验
收稿日期: 2014-11-13
修回日期: 2015-01-03
网络出版日期: 2015-01-13
基金资助
国家自然科学基金与中国民航联合资助基金重点项目（60939003)
Mathematical modelling and calibration experiment of new electrostatic sensor in aviation
Received date: 2014-11-13
Revised date: 2015-01-03
Online published: 2015-01-13
Supported by
Grant from National Natural Science Foundation of China and Civil Aviation Administration of China (60939003)
静电传感器是一种用于航空发动机润滑油路中磨粒在线监测的新型传感器，为了对静电传感器的特性进行研究，改进了静电传感器的数学模型，设计了静电传感器标定装置。标定装置通过高压电场使油滴荷电，可以产生电量和极性可调的带电油滴，并可通过静电计准确测量产生的油滴电量。通过对数学模型的分析，以及标定实验的实验研究，确定了传感器的空间灵敏度分布；发现并验证了定速带电油滴沿着传感器固定径向位置移动时，静电传感器输出电压的峰值与施感电荷呈线性关系；通过标定实验获得了传感器的标定曲线，并进一步定量确定了传感器静态灵敏度在径向位置上的分布，标定实验也同时验证了数学模型的正确性。
冒慧杰 , 左洪福 , 黄文杰 , 殷逸冰 , 刘宸宁 . 航空新型静电传感器建模与标定实验[J]. 航空学报, 2016 , 37(7) : 2242 -2250 . DOI: 10.7527/S1000-6893.2015.0007
Electrostatic inductive sensor is a new kind of sensor for in-line monitoring of abrasive grains in aviation flow oil system. In order to study the characteristics of the electrostatic sensor, we improved the mathematical model of the electrostatic sensor and designed an electrostatic sensor calibration device. With high voltage electric field, calibration device could generate charged oil droplets whose charge and polarity were adjustable, and with the Faraday cup and electrometer the charge of the oil droplets could be measured accurately. Through qualitative analysis of the mathematical model and calibration experimental verification experiments, we determined the distribution of the sensor's spatial sensitivity; then we discovered and verified that the peak output voltage of the electrostatic senor and the inducing charge had a linear relationship when the charged droplets moved along a fixed radial position and at an instant velocity in the sensor. Through the calibration experiments, we obtained the sensor's calibration curve, quantitatively determined the static sensitivity of the sensor on the radial position and proved the correctness of the mathematical model.
[1] COURSES E, SURVEYS T. Use of electrostatic technology for aeroengine oil system monitoring[C]//Proceeding of Aerospace Conference. Piscataway, NJ:IEEE Press, 2000:57-71.
[2] 文振华, 左洪福, 李耀华. 气路颗粒静电监测技术及实验[J]. 航空动力学报, 2008, 23(12):2321-2326. WEN Z H, ZUO H F, LI Y H. Gas path debris electrostatic monitoring technology and experiment[J]. Journal of Aerospace Power, 2008, 23(12):2312-2326(in Chinese).
[3] 李绍成, 左洪福. 磨粒在线监测静电传感器设计[J]. 压电与声光, 2010, 32(2):325-328. LI S C, ZUO H F. Design of electrostatic sensor for wear debris on-line monitoring[J]. Piezoel Ectrics & Acoustooptics, 2010, 32(2):325-328(in Chinese).
[4] 陈志雄, 左洪福, 詹志娟, 等. 滑油系统全流量在线磨粒静电监测技术研究[J]. 航空学报, 2012, 33(3):446-452. CHEN Z X, ZUO H F, ZHAN Z J, et al. Study of oil system oil-line debris electrostatic monitoring technology[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(3):446-452(in Chinese).
[5] HARVEY T J, MORRIS S, WANG L, et al. Real-time monitoring of wear debris using electrostatic sensing techniques[J]. Journal of Engineering Tribology, 2007, 221(1):27-40.
[6] HARVEY T J, WOOD R J K, POWRIE H E G. Electrostatic wear monitoring of rolling element bearings[J]. Wear, 2007, 263(9):1492-1501.
[7] WANG L, WOOD R J K, HARVEY T J, et al. Wear performance of oil lubricated silicon nitride sliding against various bearing steels[J]. Wear, 2003, 255(1-6):657-668.
[8] MORRIS S, WOOD R J K, HARVEY T J. Use of electrostatic charge monitoring for early detection of adhesive wear in oil lubricated contacts[J]. Journal of Tribology, 2002, 124(2):288-296.
[9] POWRIE H E G, FISHER C E. Engine health monitoring:towards total prognostics[C]//Proceedings of IEEE Aerospace Conference. Piscataway, NJ:IEEE Press, 1999:11-20.
[10] GAJEWSKI J B. Non-contact electrostatic flow probes for measuring the flow rate and charge in the two-phase gas-solids flows[J]. Chemical Engineering Science, 2006, 61(7):2262-2270.
[11] GAJEWSKI J B. Electrostatic nonintrusive method for measuring the electric charge, mass flow rate, and velocity of particulates in the two-phase gas-solid pipe flows-its only or as many as 50 years of historical evolution[J]. IEEE Transactions on Industry Applications, 2008, 44(5):1418-1430.
[12] YAN Y, BYRNE B, S WOODHEAD S, et al. Velocity measurement of pneumatically conveyed solids using electro-dynamic sensors[J]. Measurement Science and Technology, 1995, 6(5):515-537.
[13] WANG L J, YAN Y. Mathematical modelling and experimental validation of electrostatic sensors for rotational speed measurement[J]. Measurement Science and Technology, 2014, 25(11):115101.
[14] CHENG R. A study of electrostatic pulverised fuel meters[D]. Middlesbrough,UK:University of Teesside, 1996.
[15] XU C L, WANG S M, TANG G H. Sensing characteristics of electrostatic inductive sensor for flow parameters measurement of pneumatically conveyed particles[J]. Journal of Electrostatics, 2007, 65(9):582-592.
[16] 文振华. 基于静电感应的航空发动机气路监测技术研究[D]. 南京:南京航空航天大学, 2009:43-53. WEN Z H. Aero-engine gas path monitoring technology based on electrostatic induction[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2009:43-53.
[17] 陈志雄, 左洪福, 詹志娟. 轴承钢摩擦副全流量在线磨粒静电监测方法[J]. 航空动力学报, 2012, 27(5), 1096-1104. CHEN Z X, ZUO H F, ZHAN Z J. Method for oil-line debris electrostatic monitor of bearing steel sliding friction pairs[J]. Journal of Aerospace Power, 2012, 27(5), 1096-1104(in Chinese).
[18] 黄文杰, 左洪福. 滑油系统全流量磨粒在线监测的静电传感技术研究[J]. 航空学报, 2013, 34(8):1786-1794. HUANG W J, ZUO H F. Research on electrostatic sensing for In-line abrasive monitoring in full flow oil system[J]. Acta Aeronoutica et Astronautica Sinica, 2013, 34(8):1786-1794(in Chinese).
[19] 贾伯年, 俞朴, 宋爱国. 传感器技术[M]. 南京:东南大学出版社, 2007:12-19. JIA B N, YU P, SONG A G. Sensor technology[M]. Nanjing:Southeast University Press, 2007:12-19.
[20] 何伟铭, 蒋超伟, 井原透. 高精度传感器标定曲线的预测拟合[J]. 传感技术学报, 2013, 26(11):1519-1524. HE W M, JIANG C W, JIN Y T. Predicting fitting of high precision sensor calibrating curve[J]. Chinese Journal of Sensors and Actuators, 2013, 26(11):1519-1524(in Chinese).
/
| 〈 |
|
〉 |
CJA