航空学报 > 2007, Vol. 28 Issue (3): 519-526

三维副翼铰链力矩计算

吴宗成,朱自强,丁宁,陈泽民   

  1. 北京航空航天大学 航空科学与工程学院
  • 收稿日期:2006-04-12 修回日期:2006-12-08 出版日期:2007-05-10 发布日期:2007-05-10
  • 通讯作者: 吴宗成

Calculation of Hinge Moment of 3D Aileron

WU Zong-cheng,ZHU Zi-qiang,DING Ning,CHEN Ze-min   

  1. School of Aeronautic Science and Technology, Beijing University of Aeronautics and Astronautics
  • Received:2006-04-12 Revised:2006-12-08 Online:2007-05-10 Published:2007-05-10
  • Contact: WU Zongcheng

摘要:

数值模拟了带副翼偏转构型的二维、三维亚、跨、超声速来流情况的绕流流场,采用有限体积方法和AUSM+迎风格式数值求解N-S方程,四步龙格-库塔时间推进,湍流模型为Baldwin-Lomax和Spalart-Allmaras湍流模型。二维模拟压强分布与实验数据以及CFD软件模拟结果吻合较好。采用交错对接网格,数值模拟了不同副翼偏角和缝隙、来流马赫数、迎角和雷诺数的三维构型流场。通过舵面铰链力矩与实验数据的对比分析表明了该数值方法模拟此类复杂流场的可靠性和舵面铰链力矩计算的有效性。发现并研究了亚声速来流时铰链力矩随迎角的反向变化趋势,初步分析了副翼的缝隙和雷诺数效应。

关键词: 副翼, 铰链力矩, N-S方程

Abstract:

The flows around 2-D and 3-D wings with ailerons deflected are numerical simulated in cases of subsonic, transonic and supersonic speeds. The NavierStokes equations are solved using finite volume method and AUSM+ scheme, and the four-step RangeKutta method for time marching. Turbulence models used are BaldwinLomax and SpalartAllmaras models. The 2-D calculated pressure results coincide well with the experiment data and CFD software simulation results.

Key words: aileron,  , hinge , moment,  , N-S , equations

中图分类号: