外吹式襟翼动力增升效果评估方法

doi:10.7527/S1000-6893.2016.0272

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

外吹式襟翼动力增升效果评估方法

张声伟, 王伟

中航工业第一飞机研究院, 西安 710089

收稿日期:2016-08-19 修回日期:2016-10-10 出版日期:2017-06-15 发布日期:2016-10-24
通讯作者: 张声伟,E-mail:13325381298@163.com E-mail:13325381298@163.com

Method for evaluating powered high-lift effects of externally blown flap

ZHANG Shengwei, WANG Wei

The First Aircraft Institute of AVIC, Xi'an 710089, China

Received:2016-08-19 Revised:2016-10-10 Online:2017-06-15 Published:2016-10-24

摘要/Abstract

摘要：

外吹式动力增升襟翼可以有效地缩短运输类飞机的起降距离，其增升效果评估方法是运输机动力增升设计的关键技术之一。本文采用基准气动力耦合速度修正方法，发展了一套适用于外吹式襟翼动力增升效果快速评估的计算方法；该方法充分考虑了动力增升飞机性能计算对气动力数据的需求，解决了传统推力系数法的小速度大推力系数求解限制问题、无法准确求解离地速度以及多速度点气动力求解引起的计算效率问题。以某运输机为例，分析了其气动力及起飞性能，对其外吹式襟翼动力增升效果进行了评估，验证了方法的正确性。研究表明：通过优化动力增升襟翼偏转角，起飞滑跑距离最大减小量可达到25%；过大的襟翼偏转角将显著地增加飞机阻力，不利于缩短起飞滑跑距离。研究工作对运输机的外吹式动力增升襟翼设计，具有一定的工程指导价值。

关键词: 外吹式襟翼, 动力增升, 气动力计算, 性能收益评估, 襟翼构型优化

Abstract:

Externally blown flaps are usually adopted to shorten the takeoff and land distance of transport aircrafts, and the method for evaluating the powered high-lift effect of the externally blown flap is one of the most important techniques in the design of transport aircrafts. A method for rapidly evaluating the powered high-lift effect of the externally blown flap is developed by coupling basic aerodynamics with the velocity correction technique. The proposed method takes into consideration the requirements for aerodynamic data in the performance computation of powered high-lift aircrafts, and can overcome disadvantages of classical trust coefficient method, such as low speed, limits of large thrust coefficient computation, low precision in solving unstick speed, and inefficiency of solving the problem of aerodynamic loading at multi-velocity point. The aerodynamic and takeoff performance of a transport aircraft are analyzed and the powered high-lift effects of the externally blown flaps are evaluated to validate the proposed method. The results show that the takeoff running distance can be shortened by 25% by deflecting the flaps rationally. However, with too large deflection angle of powered high-lift flaps, the aircraft drag will increase dramatically to go against shortening the takeoff running distance. The research results would provide some guidance for the design of externally blown flaps.

Key words: externally blown flap, powered high-lift, aerodynamics computation, performance earning evaluation, flap configuration optimization

中图分类号:

张声伟, 王伟. 外吹式襟翼动力增升效果评估方法[J]. 航空学报, 2017, 38(6): 220689-220689.

ZHANG Shengwei, WANG Wei. Method for evaluating powered high-lift effects of externally blown flap[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(6): 220689-220689.

参考文献

[1] PARLETT L P, SHIVERS J P. Wind-tunnel investigation of a large jet transport model equipped with an external-flow jet flap: AIAA-1968-4928[R]. Reston: AIAA, 1968.
[2] PARLETT L P, SHIVERS J P. Wind-tunnel investigation of an STOL aircraft configuration equipped with an external-flow jet flap: AIAA-1969-5364[R]. Reston: AIAA, 1969.
[3] PARLETT L P, FREEMAN D C. Wind-tunnel investigation of a jet transport airplane configuration with high thrust-weight ratio and an external-flow jet flap: AIAA-1970-6058[R]. Reston: AIAA, 1970.
[4] AOYAGI K, FALARSKI M D, KOENIG D G. Wind-tunnel investigation of a large scale 25 deg swept-wing jet transport model with an external blowing tripple-slotted flap: AIAA-1973-62197[R]. Reston: AIAA, 1973.
[5] BARBERIE F J, WICK A T, HOOKER J R. Low speed powered lift testing of a transonic cruise efficient STOL military transport: AIAA-2013-1099[R]. Reston: AIAA, 2013.
[6] WICK A T, HOOKER J R, BARBERIE F J. Powered lift CFD predictions of a transonic cruising STOL military transport: AIAA-2013-1098[R]. Reston: AIAA, 2013.
[7] MARCOS J, MARSHALL D D. Computational and experimental comparison of a powered lift, upper surface blowing configuration: AIAA-2010-0502[R]. Reston: AIAA, 2010.
[8] ENGLAR R J, CAMPBELL B A. Pneumatic channel wing power-lift advanced super-STOL aircraft: AIAA-2002-3275[R]. Reston: AIAA, 2002.
[9] 白俊强, 张晓亮, 刘楠. 考虑动力影响的大型运输机增升构型气动特性研究[J]. 空气动力学学报, 2014, 32(4): 2-5. BAI J Q, ZHANG X L, LIU N. The research of aerodynamic characteristics of high-lift configuration of large transport plane with the effect of engine jet[J]. Acta Aerodynamica Sinica, 2014, 32(4): 2-5 (in Chinese).
[10] 郭少杰, 王豪杰, 李杰. 外吹式襟翼动力增升数值模拟方法研究[J]. 航空工程进展, 2010, 1(1): 3-5. GUO S J, WANG H J, LI J. Numerical simulating method for powered high-lift flow[J]. Advances in Aeronautical Science and Engineering, 2010, 1(1):3-5 (in Chinese).
[11] 李少飞, 李杰, 刘正宾. 外吹式襟翼动力增升绕流数值分析[J]. 航空计算技术, 2008, 38(5): 2-4. LI S F, LI J, LIU Z B. Numerical simulation of externally blown flap with powered high-lift flow[J]. Aeronautical Computing Technique, 2008, 38(5): 2-4 (in Chinese).
[12] 刘李涛, 杨永, 李喜乐. 外吹式动力吹气襟翼N-S方程数值分析[J]. 航空计算技术, 2008, 38(3): 2-6. LIU L T, YANG Y, LI X L. Numerical analysis of high-lift system with externally blown flap using N-S equations[J]. Aeronautical Computing Technique, 2008, 38(3): 2-6 (in Chinese).
[13] SMITH C C. Effect of engine position and high-lift devices on aerodynamic characteristics of an external-flow jet-flap STOL model: AIAA-1971-6222[R]. Reston: AIAA, 1971.
[14] SMITH C C. Effect of wing aspect ratio and flap span on aerodynamic characteristics of an externally blown jet-flap STOL model: AIAA-1973-7205[R]. Reston: AIAA, 1973.
[15] JONES P K, BURGIN K. Conversion of lift coefficient increment due to flaps from full span to part span: ESDU-1974-74012[R]. London: ESDU, 1974.
[16] BONENFANT D, CARTER E C. Lift-curve slope and aerodynamic centre position of wings in inviscid subsonic flow: ESDU-1974-70011[R]. London: ESDU, 1974.
[17] WEIR J, FLOWER J W. Aircraft forces due to interference between a jet efflux and a slotted flap: ESDU-1982-82034[R]. London: ESDU, 1982.
[18] BOBBITT P J. Analysis of the takeoff and landing of powered lift aircraft: AIAA-2007-1273[R]. Reston: AIAA, 2007.
[19] BOBBITT P J, MARGASON R. Analysis of the take-off and landing of power-lift aircraft: AIAA-2007-1256[R]. Reston: AIAA, 2007.
[20] NORTON B. STOL Progenitors: The technology path to a large STOL aircraft and the C-17A: AIAA-2002-1369[R]. Reston: AIAA, 2002.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

外吹式襟翼动力增升效果评估方法

Method for evaluating powered high-lift effects of externally blown flap

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	朱自强, 吴宗成. 环量控制技术研究[J]. 航空学报, 2016, 37(2): 411-428.
[2]	刘杰;朱自强;陈泽民;吴宗成. 基于欧拉方程的尾迹面法气动力计算[J]. 航空学报, 2005, 26(4): 417-421.
[3]	陆志良;任继业;陶棣. 多段翼型优化设计计算[J]. 航空学报, 1992, 13(8): 357-361.
[4]	叶正寅;杨永年;赵令诚. 大攻角非线性问题的局部线化方法[J]. 航空学报, 1989, 10(10): 468-473.
[5]	张宝琴;陆志良. 计及边界层汇流效应的多段翼型失速特性计算[J]. 航空学报, 1988, 9(4): 123-131.