| [1] Won Y Y, Nakagawa T. Replacement and inspection policies for products with random life cycle[J]. Reliability Engineering & System Safety, 2010, 95(3): 161-165.[2] Philip A S, Cristiano A V C. Hybrid block replacement and inspection policies for a multi-component system with heterogeneous component lives[J]. European Journal of Operational Research, 2010, 206(2): 384-394.[3] Sheils E, Connor A O, Breysse D, et al. Development of a two-stage inspection process for the assessment of deteriorating infrastructure[J]. Reliability Engineering & System Safety, 2010, 95(3): 182-194.[4] Lina L H, Roberto C Q. Integrating on-line process control and imperfect corrective maintenance: an economical design[J]. European Journal of Operational Research, 2012, 222(2): 253-262.[5] Kallen M J, van Noortwijk J M. Optimal maintenance decisions under imperfect inspection[J]. Reliability Engineering & System Safety, 2005, 90(2): 177-185.[6] Ge E S, Li Q M, Zhang G Y, et al. Optimization of condition-based maintenance for degradation systems under imperfect maintenance[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2): 316-324 (in Chinese). 葛恩顺, 李庆民, 张光宇, 等. 考虑不完全维修的劣化系统最优视情维修策略[J]. 航空学报, 2013, 34(2): 316-324.[7] Chen J W, Li K H, Lamb Y. Bayesian computation for geometric process in maintenance problems[J]. Mathematics and Computers in Simulation, 2010, 81(4): 771-781.[8] van der Weide J A M, Pandey M D. Stochastic analysis of shock process and modeling of condition-based maintenance[J]. Reliability Engineering & System Safety, 2011, 96(6): 619-626.[9] Rosmaini A, Shahrul K. An overview of time-based and condition-based maintenance in industrial application[J]. Computers and Industrial Engineering, 2012, 63(1): 135-149.[10] Pham H, Wang H Z. Imperfect maintenance[J]. European Journal of Operational Research, 1996, 94(3): 425-438.[11] Liu Y, Huang H Z. Optimal selective maintenance strategy for multi-state systems under imperfect maintenance[J]. IEEE Transactions on Reliability, 2010, 59(2): 356-367.[12] Xia T B, Xi L F, Zhou X J, et al. Modeling and optimizing maintenance schedule for energy systems subject to degradation[J]. Computers and Industrial Engineering, 2012, 63(3): 607-614.[13] Sheu S H, Li S H, Chang C C. A generalised maintenance policy with age-dependent minimal repair cost for a system subject to shocks under periodic overhaul[J]. International Journal of Systems Science, 2012, 43(6): 1007-1013.[14] Wang X L, Cheng Z J, Guo B, et al. Imperfect maintenance decision for a deteriorating system based on shock model[J]. Systems Engineering-Theory & Practice, 2011, 31(12): 2380-2386 (in Chinese). 王小林, 程志君, 郭波, 等.基于冲击模型劣化系统的不完全维修决策[J].系统工程理论与实践, 2011,31(12):2380-2386.[15] Zhang Y Q, Feng J, Liu Q, et al. Reliability analysis based on performance degradation model of compound Poisson-Normal process[J]. Systems Engineering and Electronics, 2006, 28(11): 1775-1778 (in Chinese). 张永强, 冯静, 刘琦, 等. 基于Poisson-Normal过程性能退化模型的可靠性分析[J].系统工程与电子技术, 2006, 28(11): 1775-1778.[16] Li D W, Zhang Z H, Liu T H, et al. Product maintenance strategy research based on the scheduled servicing[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(5): 1101-1107 (in Chinese). 李大伟, 张志华, 刘天华, 等. 基于定期维护的产品维修策略研究[J]. 航空学报, 2013, 34(5): 1101-1107.[17] Cha J H, Lee E Y. An extended stochastic failure model for a system subject to random shocks[J]. Operations Research Letters, 2010, 38(5): 468-473.[18] Dinesh Kumar U, Knezevic J, Crocker J. Maintenance free operating period-an alternative measure to MTBF and failure rate for specifying reliability[J]. Reliability Engineering & System Safety, 1999, 64(1): 127-131.[19] Li D W, Zhang Z H, Zhong Q H, et al. Performance deterioration modeling and optimal preventive maintenance strategy under scheduled servicing subject to mission time[J]. Chinese Journal of Aeronautics, 2014, 27(4): 821-828.[20] Yan C L, Liu K G. Theory of economic life prediction and reliability assessment of aircraft structures[J]. Chinese Journal of Aeronautics, 2011, 24(2): 164-170. |
CJA
