| [1] Liu X J,Wang H C,Li D W,et al.Thermodynamics analysis of the effect of substrate elements on its coating in TD process.Transactions of Materials and Heat Treatment,2006,27(4):119-122.(in Chinese) 刘秀娟,王华昌,李东伟,等.TD处理中基体成分对覆层影响的热力学分析.材料热处理学报,2006,27(4):119-122.[2] Zou J,Wang H C,Xiong C H,et al.Microstructure and properties of Cr12MoV steel after salt-bath vanadizing. Hot Working Technology,2005,45(4):36-38.(in Chinese) 邹隽,王华昌,熊传辉,等.Cr12MoV钢盐浴渗钒的组织与性能.热加工工艺,2005,45(4):36-38.[3] Xie Z X,Dong S J.The structures and performances of Cr12MoV steel by TD process. The Processing of 10th Heat-treatment Annual Meeting of Hubei Province.2006:21-24.(in Chinese) 谢志雄,董仕节.Cr12MoV钢TD处理的组织和性能. 湖北省第10届热处理年会论文集.2006:21-24.[4] Hu S B,Zhu X Q,Li Z Z,et al.Influencing factors of TiN coating adhesion strength determined by scratch test.Journal of Hubei Automotive Industries Institute,2001,15(2):25-28.(in Chinese) 胡树兵,朱晓青,李志章,等.用划痕法测定TiN涂层结合力的影响因素.湖北汽车工业学院学报,2001,15(2):25-28.[5] Zhang H X,Zhang T H,Huan Y.Nanoindentation and nanoscratch measurements on the mechanical properties of SiO2 film.Micronanoelectronic Technology,2003,39(7/8):245-248.(in Chinese) 张海霞,张泰华,郇勇.纳米压痕和划痕法测定氧化硅薄膜材料的力学特性.微纳电子技术,2003,39(7/8):245-248.[6] Mayrhofer P H,Hovsepian P E,Mitterer C,et al.Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings.Surface and Coatings Technology,2004,177/178:341-347.[7] Zhou Z,Rainforth W M,Lewis D B,et al.Oxidation behaviour of nanoscale TiAlN/VN multilayer coatings.Surface and Coatings Technology,2004,177/178:198-203.[8] Aouni A,Weisbecker P,Loi T H,et al.Search for new materials in sputtered V1-xCx films.Thin Solid Film,2004,469/470:315-321.[9] Ferro D,Rau J V,Rossi V,et al.Electron beam deposited VC and NbC thin films on titanium:hardness and energy-dispersive X-ray diffraction study.Surface and Coatings Technology,2008,202:1455-1461.[10] Zhang Z Y,Xu J Q.The interface failure criterion of coating materials.Journal of Shanghai Jiaotong University,2007,41(6):983-987.(in Chinese) 张镇宇,许金泉.薄膜涂层材料的界面破坏准则.上海交通大学学报,2007,41(6):983-987.[11] Zhao H L,Cai Y X,Han B,et al.Mechanical properties of composite coating consisting of cerium and titanium by nanoindentation and nanoscratch.Journal of the Chinese Rare Earth Society,2006,24(Sup.):116-119.(in Chinese) 赵洪力,蔡永秀,韩冰,等.纳米压痕和划痕法对含氧化铈薄膜机械性能的测定.中国稀土学报,2006,24(增刊):116-119.[12] Liang F H,Wang K G,Zhou L.Formation of apatite coatings on titanium subjected to precalcification.Materials Science & Engineering,2004,22(1):38-40.(in Chinese) 梁芳慧,王克光,周廉.预钙化处理后的钛表面磷灰石涂层的形成.材料科学与工程学报,2004,22(1):38-40.[13] Ma X F,Wu Y Q,Niu L S,et al.Measurement and analysis on the mechanical properties of silicon carbide film.Journal of Experimental Mechanics,2007,22(1):49-56.(in Chinese) 马显锋,吴艳青,牛莉莎,等.碳化硅薄膜的力学性能测试分析.实验力学,2007,22(1):49-56.[14] Zhao J S,Xu D Q,Choy K.Scratch test of DLC and fluorinated DLC deposited by unbalanced magnetron sputtering method and the influence of fluorine on the properties of DLC.Chinese Journal of Mechanical Engineering,1999,35(5):80-84.(in Chinese) 赵建生,许大庆,Choy K.非平衡磁控溅射类金刚石薄膜的抗刻划性能及氟对结合强度的影响.机械工程学报,1999,35(5):80-84.[15] Zhang X C,Xu B S,Wang H D,et al.Thermal residual stresses in functionally graded coatings.Chinese Journal of Mechanical Engineering,2006,42(1):13-17.(in Chinese) 张显程,徐滨士,王海斗,等.功能梯度涂层热残余应力.机械工程学报,2006,42(1):13-17.[16] Yang H G,Li S,Duan D L.Scratching test and its finite element simulation for estimating adhesion between TiN film and substrate.Tribology,2009,29(6):592-599.(in Chinese) 杨洪刚,李曙,段德莉.评估TiN薄膜与基材结合的划痕试验及有限元模拟.摩擦学学报,2009,29(6):592-599.[17] Liu D X,Xi Y T,Han D,et al.Study on solid particle erosion behaviors of ZrN gradient coatings prepared by ion assisting arc deposition.Journal of Aeronautical Materials,2010,30 (4):31-37.(in Chinese) 刘道新,奚运涛,韩栋,等.离子辅助电弧沉积ZrN梯度涂层抗固体粒子冲蚀行为研究.航空材料学报,2010,30 (4):31-37. |
CJA
