航空学报 > 1987, Vol. 8 Issue (11): 628-631

纤维铺设角对Beck型层合梁柱临界值的影响

熊跃熙, 王俊奎   

  1. 北京航空学院
  • 收稿日期:1987-01-23 修回日期:1900-01-01 出版日期:1987-11-25 发布日期:1987-11-25

PLY ANGLE EFFECT ON CRITICAL VALUES OF A BECK-TYPE LAMINATED COLUMN

Xiong Yusxi, Wang Junkuei   

  1. Beijing Institute of Aeronautics and Astronautics
  • Received:1987-01-23 Revised:1900-01-01 Online:1987-11-25 Published:1987-11-25

摘要: 引言 随着复合材料愈来愈广泛的应用,各种各样的力学问题被提了出来。非保守结构系统的稳定性是航空航天工程中的重要问题,复合材料的应用在该领域尤为受到重视。因此,研究复合材料结构在非保守载荷作用下的稳定性已为设计部门所要求,值得引起人们重视。

Abstract: In the present paper, the stability of a Beck-type laminated column is investigated. The characteristic equation of the column is derived according to Timoshenko beam theory. The effect of. ply angle on the critical values is discussed. For an example given in the paper, the characters of variation of critical values with ply angle are calculated. The results show that (1)the ply angle of a Beck-type laminated column has a remarkable effect on its critical values, and the actual critical frequency and load decrease sharply as the ply angle increases while other factors remain unchanged; ( 2) for a Beck-type laminated column with definite slender ratio and large shear parameter, the effect of ply angle on the actual critical values is principally reflected in that on the bending stiffness of the column.