航空学报 > 1999, Vol. 20 Issue (5): 450-454

二维埋入式进气道的数值分析

杨爱玲, 郭荣伟   

  1. 南京航空航天大学动力工程系 江苏南京 210016
  • 收稿日期:1998-06-25 修回日期:1998-11-10 出版日期:1999-10-25 发布日期:1999-10-25

NUMERICAL SIMULATION OF THE FLOW OF TWO-DIMENSIONAL SUBMERGED AIR INTAKE

YANG Ai-ling, GUO Rong-wei   

  1. Department of Power Engineering, Nanjing University of Areonautics and Astronautics, Nanjing 210016, China
  • Received:1998-06-25 Revised:1998-11-10 Online:1999-10-25 Published:1999-10-25

摘要: 采用并改进了适用于分离流动的 Johnson King 紊流模型,结合 L US G S近似隐式格式和基于 M U S C L非线性插值的 Roe 格式编写了雷诺平均的二维 N-S方程的求解程序。然后借助于该流场计算程序完成了二维埋入式进气道的数值研究,分析了几何设计参数对进气道性能的影响。

关键词: 埋入式进气道, 数值分析, 紊流模型

Abstract: Combining the LU SGS implicit scheme and Roe's approximate Riemann scheme based on the MUSCL interpolation, a code for 2 Dimensional compressible Navier Stokes Equations is developed. The Johnson King turbulence model is used to simulate the separated flows. Then the internal and external flow fields of three 2 Dimensional submerged air intakes are computed with the code, and the influence of design parameters on the performance of the intakes is analyzed. The large range of backflow appears in the submerged air intake, especially in the large offset, compact intake. The results also show that the separated range becomes smaller with the reduction of the ratio of the offset to the length of the intake.

Key words: submerged air intake, numerical analysis, turbulence model

中图分类号: