航空学报 > 2025, Vol. 46 Issue (19): 531602-531602   doi: 10.7527/S1000-6893.2025.31602

基于颤振试飞数字孪生扫频数据重构的模态参数估计

胡家亮1, 吴江鹏1, 霍思旭1(), 高一地1, 郑华2   

  1. 1.航空工业 沈阳飞机设计研究所,沈阳 110034
    2.西北工业大学 动力与能源学院,西安 710072
  • 收稿日期:2024-12-03 修回日期:2025-05-16 接受日期:2025-06-13 出版日期:2025-07-04 发布日期:2025-07-03
  • 通讯作者: 霍思旭 E-mail:782097561@qq.com
  • 基金资助:
    国防基础科研计划(JCKY2019205A006)

Modal parameter estimation based on reconstruction of digital twin sweep data in flutter flight test

Jialiang HU1, Jiangpeng WU1, Sixu HUO1(), Yidi GAO1, Hua ZHENG2   

  1. 1.AVIC Shenyang Aircraft Design and Research Institute,Shenyang 110034,China
    2.School of Power and Energy,Northwestern Polytechnical University,Xi’an 710072,China
  • Received:2024-12-03 Revised:2025-05-16 Accepted:2025-06-13 Online:2025-07-04 Published:2025-07-03
  • Contact: Sixu HUO E-mail:782097561@qq.com
  • Supported by:
    Defense Industrial Technology Development Program(JCKY2019205A006)

摘要:

在数字孪生试飞中,要采用高质量的试飞数据进行数字模型与实际试飞数据的融合。试飞过程中,飞机不可避免地会受到大气紊流的持续激励,为了消除紊流激励的影响,提高后续信号处理结论的准确性,提出了一种基于颤振试飞数字孪生数据重构的扫频响应模态参数估计方法。首先对实测响应进行时域重构,将其分离为纯粹因扫频引起的结构响应和由紊流激励的结构响应两部分,进而应用子空间算法分别对分离后2种响应数据进行模态参数辨识,最后通过仿真和实测数据对所提出方法进行了验证。结果表明,所提方法可以获得满足数字孪生中虚实融合要求的高质量试飞数据,数据重构后可以获得更加准确、可信的辨识结果。同时由于紊流响应的分离和紊流独特的宽频特性,所提方法对扫频范围以外的模态也可进行有效辨识。

关键词: 数字孪生试飞, 扫频激励, 紊流激励, 信号重构, 模态参数辨识

Abstract:

During the digital twinning flight test, high-quality flight test data is used to fuse the digital model with the actual flight test data. In order to eliminate the effect of turbulence excitation and improve the accuracy of subsequent signal processing conclusions, a new method for estimating swept frequency response modal parameters is proposed based on the reconstruction of flutter flight test digital twinning data. First, the measured response is reconstructed in the time domain, and it is separated into two parts: the structural response caused purely by the swept and the structural response excited by turbulence. Then, the subspace algorithm is used to identify the modal parameters of the two separated response data respectively. Finally, the proposed method is verified by simulation and measured data. The results show that the proposed method can obtain high-quality test flight data that meets the requirements of virtual-real fusion in digital twins, after data reconstruction, more accurate and reliable identification results can be obtained; at the same time, due to the separation of turbulent response and the unique broadband characteristics of turbulence, the method can also effectively identify modes outside the swept frequency range.

Key words: digital twin flight test, swept excitation, turbulence excitation, signal reconstruction, modal parameter identification

中图分类号: