| [1] Lavender R E. Equations for two-dimensional analysis of touchdown dynamics of spacecraft with hinged legs including elastic, damping, and crushing effects, N 66 23668. Huntsville: George C. Marshall Space Flight Center, 1963.[2] Nohmi M, Miyahara A. Modeling for lunar lander by mechanical dynamics software, AIAA-2005-6416. Reston: AIAA, 2005.[3] Otto O R, Laurenson R M, Melliere R A, et al. Analyses and limited evaluation of payload and legged landing system structures for the survivable soft landing of instrument payloads, NASA CR-111919. Washington D.C.: NASA, 1971.[4] Chen J B, Nie H. Overloading of landing based on the deformation of the lunar lander[J]. Chinese Journal of Aeronautics, 2008, 21(1): 43-47.[5] Wan J L, Nie H, Chen J B, et al. Impact response analysis of payloads of lunar lander for lunar landing[J]. Journal of Astronautics, 2010, 31(11): 2456-2464. (in Chinese) 万峻麟, 聂宏, 陈金宝, 等. 月球着陆器有效载荷着陆冲击响应分析[J]. 宇航学报, 2010, 31(11): 2456-2464.[6] Zhao J F. A study on soft-landing dynamics and environment of lunar lander. Beijing: School of Aerospace Engineering, Beijing Institute of Technology, 2011. (in Chinese) 赵俊锋. 月球探测器软着陆动力学分析及力学环境研究. 北京: 北京理工大学宇航学院, 2011.[7] Liang D P, Chai H Y, Zeng F M. Nonlinear finite element modeling and simulation for landing leg of lunar lander[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(1): 1-5. (in Chinese) 梁东平, 柴洪友, 曾福明. 月球着陆器着陆腿非线性有限元建模与仿真[J]. 北京航空航天大学学报, 2013, 39(1): 1-5.[8] Kim K O, Anderson W J. Generalized dynamic reduction in finite element dynamic optimization[J]. AIAA Journal, 1984, 22(11): 1616-1617.[9] Laurenson R, Melliere R, Mcgehee J. Analysis of legged landers for the survivable soft landing of instrument payloads[J]. Journal of Spacecraft and Rockets, 1972, 10(3): 208-214.[10] William F R. Apollo experience report-lunar module landing gear subsystem, NASA TN D-6850. Washington D.C.: NASA, 1972.[11] Liang D P, Chai H Y. Lunar soil constitutive model and finite element modeling for landing impact simulation[J]. Spacecraft Engineering, 2012, 21(1): 18-24. (in Chinese) 梁东平, 柴洪友. 着陆冲击仿真月壤本构模型及有限元建模[J]. 航天器工程, 2012, 21(1): 18-24.[12] Guyan R J. Reduction of stiffness and mass matrices[J]. AIAA Journal, 1965, 3(2): 380.[13] Zhang J. Some direct and inverse dynamic problems on damped spacecraft structure. Harbin: Department of Astronautics Engineering and Mechanics, Harbin Institute of Technology, 2010. (in Chinese) 张静. 航天器阻尼结构的若干动力学正问题和反问题研究. 哈尔滨: 哈尔滨工业大学航天工程与力学系, 2010.[14] Sundararajan P, Noah S T. An algorithm for response and stability of large order non-linear systems - application to rotor systems[J]. Journal of Sound and Vibration, 1998, 214(4): 695-723.[15] Hughes P C. Modal identities for elastic bodies, with application to vehicle dynamics and control[J]. Journal of Applied Mechanics, 1980, 47(1): 177-184.[16] Hughes P C, Skelton R E. Modal truncation for flexible spacecraft[J]. Guidance and Control, 1981, 4(3): 291-297.[17] Lee A, Tsuha W S. Model reduction methodology for articulated, multiflexible body structures[J]. Journal of Guidance, Control, and Dynamics, 1994, 17(1): 69-75.[18] Hughes P C, Skelton R E. Controllability and observability for flexible spacecraft[J]. Guidance and Control, 1980, 3(5): 452-459.[19] Skelton R E, Gregory C Z. Measurement feedback and model reduction by modal cost analysis//Proceedings of the 1979 Joint Automatic Control Conference. New York: American Institude Chemical Engineers, 1979, 17(21): 211-218.[20] Moore B C. Principal component analysis in linear systems: controllability, observability, and model reduction[J]. IEEE Transactions on Automatic Control, 1981, 26(1): 17-32.[21] Liu Z Y. Study on modeling theory and simulation technique for rigid-flexible coupling systems dynamics. Shanghai: Department of Engineering Mechanics, Shanghai Jiao Tong University, 2008. (in Chinese) 刘铸永. 刚-柔耦合系统动力学建模理论与仿真技术研究. 上海: 上海交通大学工程力学系, 2008.[22] Jin R, Chen W, Simpson T W. Comparative studies of metamodelling techniques under multiple modelling criteria [J]. Structural and Multidisciplinary Optimization, 2001, 23(1): 1-13. |
CJA
