航空学报 > 1985, Vol. 6 Issue (2): 114-120

转子在离心力场中的光弹性应力分析

董本涵, 高鹏飞, 王举, 关宪斌, 梁世昌, 申杰   

  1. 沈阳航空发动机研究所
  • 收稿日期:1984-05-30 修回日期:1900-01-01 出版日期:1985-04-25 发布日期:1985-04-25

PHOTOELASTIC STRESS ANALYSIS OF ROTATING PARTS IN CENTRIFUGAL FIELD

Dong Benhan, Gao Pengfei, Wang Ju, Guan Xianbin, Liang Shichang, Shen Jie   

  1. Shenyang Aeroengine Research Institute
  • Received:1984-05-30 Revised:1900-01-01 Online:1985-04-25 Published:1985-04-25

摘要:

本文用光弹性应力冻结切片法,模拟了航空发动机压气机转子在高速旋转时的离心应力场,对两种结构形式的轮盘及鼓筒进行了较全面的三向应力分析。根据试验结果,对旋转零件的结构进行了强度分析。

Abstract:

The application of photoelastic stress-freezing method to the three-dimensional stress analyses for two configurations of aeroengine disks and drums is described. The simulation of the rotating centrifugal field during the freeing period is considered, which contains utilization of the apparatus with a rotating cover, principles of choosing test speeds and simulation of boundary conditions, such as the configurafion, stiffness and connecting mode of the parts to be fitted.The features of the photoelastic stress analysis are also discussed and the results are applied to primary strength analysis of compressor disks and drums. The severity of stress concentration in the areas of slots, the edge of eccentric holes and bolt holes of the compressor disk is stressed. Then, some measures of improvement are offered, which may be advantageous to structural design and development of new engines.