[1] PAN T Y, LI Q S, YUAN W, et al. Effects of axisymmetric arc-shaped slot casing treatment on partial surge initiated instability in a transonic axial flow compressor[J]. Aerospace Science and Technology, 2017, 69: 257-268.
[2] ZHU Z K, YUAN W, LI Q S, et al. A study on the performance prediction model for partial casing treatments[C]//Proceedings of the 4th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering 2015. Paris: Atlantis Press, 2015: 2200-2207.
[3] ALONE D B, KUMAR S S, SHOBHAVATHY M T, et al. Experimental assessment on effect of lower porosities of bend skewed casing treatment on the performance of high speed compressor stage with tip critical rotor characteristics[J]. Aerospace Science and Technology, 2017, 60: 193-202.
[4] HAH C. The inner workings of axial casing grooves in a one and a half stage axial compressor with a large rotor tip gap: Changes in stall margin and efficiency[J]. Journal of Turbomachinery, 2019, 141(1): 011001.
[5] 李继超, 刘乐, 杜娟, 等. 低速轴流压气机周向单槽机匣处理扩稳实验研究[J]. 航空学报, 2015, 36(5): 1422-1431. LI J C, LIU L, DU J, et al. Experimental investigation of stability enhancement with single circumferential groove casing treatment on a low speed axial compressor[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(5): 1422-1431(in Chinese).
[6] SONG W M, ZHANG Y F, CHEN H X. Design and optimization of multiple circumferential casing grooves distribution considering sweep and lean variations on the blade tip[J]. Energies, 2018, 11(9): 2401.
[7] SUDER K L, HATHAWAY M D, THORP S A, et al. Compressor stability enhancement using discrete tip injection[J]. Journal of Turbomachinery, 2001, 123(1): 14-23.
[8] STRAZISAR A J, BRIGHT M M, THORP S, et al. Compressor stall control through endwall recirculation[C]//Proceedings of ASME Turbo Expo 2004: Power for Land, Sea, and Air. New York: ASME, 2004: 655-667.
[9] 李继超, 林峰, 刘乐, 等. 跨音轴流压气机自循环喷气扩稳试验研究[J]. 机械工程学报, 2014, 50(8): 135-143. LI J C, LIN F, LIU L, et al. Experimental investigation of self-recirculating tip air injection in transonic axial flow compressor[J]. Journal of Mechanical Engineering, 2014, 50(8): 135-143(in Chinese).
[10] XU R Z, SUN D K, DONG X, et al. Application of stall warning approach with stall precursor-suppressed casing treatment on a two-stage compressor[J]. Journal of Thermal Science, 2019, 28(5): 862-874.
[11] 孙晓峰, 孙大坤. 失速先兆抑制型机匣处理研究进展[J]. 航空学报, 2015, 36(8): 2529-2543. SUN X F, SUN D K. Research progresses of stall precursor-suppressed casing treatment[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(8): 2529-2543(in Chinese).
[12] ZHANG H D, WU Y, LI Y H, et al. Control of compressor tip leakage flow using plasma actuation[J]. Aerospace Science and Technology, 2019, 86: 244-255.
[13] WILKE I, KAU H P, BRIGNOLE G. Numerically aided design of a high-efficient casing treatment for a transonic compressor[C]//Proceedings of ASME Turbo Expo 2005: Power for Land, Sea, and Air. New York: ASME, 2005: 353-364.
[14] ROLFES M, LANGE M, VOGELER K, et al. Experimental and numerical investigation of a circumferential groove casing treatment in a low speed axial research compressor at different tip clearances[J]. Journal of turbomachinery, 2017, 139(12): 121009.
[15] ARSHAD A, LI Q S, LI S M, et al. Effects of inlet radial distortion on the type of stall precursor in low-speed axial compressor[J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2018, 232(1): 55-67.
[16] 熊珊, 孙大坤, 所秋玲, 等. 进气畸变条件下新型机匣处理扩稳效果实验研究[J]. 航空学报, 2013, 34(12): 2692-2700. XIONG S, SUN D K, SUO Q L, et al. Experimental investigation of novel casing treatment on stall margin enhancement under inlet distortion[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(12): 2692-2700(in Chinese).
[17] URASEK D C, MOORE R D. Effect of casing treatment on performance of an inlet stage for a transonic multistage compressor: NASA-TM-X-3347[R]. Washington, D.C.: NASA, 1976.
[18] WILKE I, KAU H P. A numerical investigation of the flow mechanisms in a HPC front stage with axial slots[C]//Proceedings of ASME Turbo Expo 2003, Collocated With the 2003 International Joint Power Generation Conference. New York: ASME, 2003: 465-477.
[19] GOINIS G, CHRISTIAN V, MARCEL A. Automated optimization of an axial-slot type casing treatment for a transonic compressor: GT2013-94765[R].New York: ASME, 2013.
[20] 屠宝锋, 胡骏, 王永明. 机匣处理的非定常数值分析[J]. 航空动力学报, 2007, 22(9): 1475-1480. TU B F, HU J, WANG Y M. Unsteady numerical analysis for casing treatment[J]. Journal of Aerospace Power, 2007, 22(9): 1475-1480(in Chinese).
[21] SUDER K L, HATHAWAY M D, THORP S A, et al. Compressor stability enhancement using discrete tip injection: 2000-GT-0650[R]. New York: ASME, 2000.
[22] NIE C Q, TONG Z T, GENG S J, et al. Experimental investigations of micro air injection to control rotating stall[J]. Journal of Thermal Science, 2007, 16(1): 1-6.
[23] WANG W, CHU W L, ZHANG H G, et al. Experimental and numerical study of tip injection in a subsonic axial flow compressor[J]. Chinese Journal of Aeronautics, 2017, 30(3): 907-917.
[24] REID L, MOORE R D. Design and overall performance of four highly loaded, high speed inlet stages for an advanced high-pressure-ratio core compressor: NASA-TP-1337[R]. Washington, D.C.: NASA, 1978.
[25] 王维, 楚武利, 张皓光. 高负荷两级轴流压气机耦合型机匣处理的设计研究[J]. 推进技术, 2017, 38(10): 2365-2373. WANG W, CHU W L, ZHANG H G. Study of design of a coupled casing treatment for a two-stage high-loaded axial flow compressor[J]. Journal of Propulsion Technology, 2017, 38(10): 2365-2373(in Chinese).
[26] ZHANG H D, WU Y, LI Y H, et al. Control of compressor tip leakage flow using plasma actuation[J]. Aerospace Science and Technology, 2019, 86: 244-255.
[27] 王维, 楚武利, 张皓光. 基于试验设计的高负荷轴流压气机叶顶喷气参数化研究[J]. 推进技术, 2014, 35(2): 178-186. WANG W, CHU W L, ZHANG H G. Parametric study of tip injection in a high-loaded axial compressor based on design of experiment[J]. Journal of Propulsion Technology, 2014, 35(2): 178-186(in Chinese).
[28] REID L, MOORE R D. Performance of single-stage axial-flow transonic compressor with rotor and stator aspect ratios of 1.19 and 1.26, respectively, and with design pressure ratio of 1.82: NASA TP 1338[R]. Washington, D.C.: NASA, 1978.
[29] 刘隆刚, 任晓栋, 李雪松, 等. 跨音压气机机匣冷却流动控制方法研究[J]. 工程热物理学报, 2019, 40(12): 2797-2805. LIU L G, REN X D, LI X S, et al. Investigation of casing cooling for flow control in the transonic axial compressor[J]. Journal of Engineering Thermophysics, 2019, 40(12): 2797-2805(in Chinese).
[30] 蒋永松, 王咏梅, 杜辉, 等. 驻室式处理机匣内部流动及扩稳机理的数值研究[J]. 航空动力学报, 2008, 23(2): 361-366. JIANG Y S, WANG Y M, DU H, et al. Plenum chamber casing treatment—Numerical research of internal flow and mechanism of stall margin improvements[J]. Journal of Aerospace Power, 2008, 23(2): 361-366(in Chinese).
[31] 王维, 楚武利, 张皓光. 叶顶喷气对高负荷轴流压气机性能的非定常影响机理[J]. 推进技术, 2014, 35(7): 905-913. WANG W, CHU W L,ZHANG H G. Mechanism of unsteady influence of tip injection on a highloaded axial compressor performance[J]. Journal of Propulsion Technology, 2014, 35(7): 905-913(in Chinese).
[32] SUDER K L, CELESTINA M L. Experimental and computational investigation of the tip clearance flow in a transonic axial compressor rotor[J].Journal of Turbomachinery, 1996, 118(2): 218-229.
[33] 何成, 王如根, 胡加国, 等. 不同转速下叶尖间隙流对跨声速压气机失速的影响[J]. 推进技术, 2016, 37(9): 1657-1663. HE C, WANG R G, HU J G, et al. Effects of tip leakage flow on transonic compressor instability at different rotation speed[J]. Journal of Propulsion Technology, 2016, 37(9): 1657-1663(in Chinese).
[34] EMMRICH R, KUNTE R, HÖNEN H, et al. Time resolved investigations of an axial compressor with casing treatment: Part 2—Simulation[C]//Proceedings of ASME Turbo Expo 2007: Power for Land, Sea, and Air. New York: ASME, 2007: 199-208.
CJA