The accuracy limit of the finite element model makes durability analysis difficult to conduct in the classic preliminary structure design, leading to the potential problem of fatigue life shortage, increasing the difficulty in structural detail design, and even resulting in structure overweight. To address this problem, we propose the strength/durability preliminary structure design method based on the variable fidelity model technology and detail fatigue rating method. Durability analysis is advanced from the late structural detail design phase to the preliminary structure design phase. A folding wing is studied in this paper, and the stress level of the critical location (the joint between the inner and outer wings) is controlled based on the requirements of strength and fatigue. Multi-case optimization is conducted to ensure that the fatigue margin is larger than zero. Consequently, iteration design caused by fatigue life shortage is limited, and lighter weight structure design can be obtained more conveniently.
CHANG Nan
,
XU Rongxin
,
CHEN Xianmin
,
YANG Jun
,
LI Yi
. Design method for strength/durability preliminary structure optimization[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021
, 42(5)
: 524389
-524389
.
DOI: 10.7527/S1000-6893.2020.24389
[1] RAYMER D. Aircraft design:A conceptual approach[M]. Reston:AIAA, 2006.
[2] TAYLOR R M, WEISSHAAR T A, SARUKHANOV V. Structural design process improvement using evolutionary finite element models[J]. Journal of Aircraft, 2006, 43(1):172-181.
[3] ELLIS R M, GROSS P, YATES J P, et al. F-35 structural design, development, and verification[C]//Aviation Technology, Integration, and Operations Conference, 2008:1-25.
[4] 王想生, 赵彬, 李永刚, 等. 飞机主承力结构细节分析[J]. 飞机设计,2008,28(6):12-17. WANG X S, ZHAO B, LI Y G, et al. The detail analysis of primary load carrying structure of the aircraft wing[J]. Aircraft Design, 2008, 28(6):12-17(in Chinses).
[5] 薛彩军,谭伟,徐奋进,等. 基于响应面模型的结构疲劳寿命优化方法[J]. 南京理工大学学报, 2011, 35(6):844-846. XUE C J, TAN W, XU F J,et al. Structural fatigue life optimization method based on response surface model[J]. Journal of Nanjing University of Science and Technology, 2011, 35(6):844-846(in Chinese).
[6] 刘志芳,高万春,王佳敏. 机翼典型高应力区开口的抗疲劳优化设计研究[C]//中国航空科学技术大会, 2019:584-589. LIU Z F, GAO W C, WANG J M. Study on anti-fatigue optimum design of typical high stress cutout zone of wing[C]//China Aviation Conference on Science and Technology, 2019:584-589(in Chinese).
[7] 陈滨琦,曾建江,王一丁,等. DFR法在结构疲劳优化设计中的应用[J]. 航空学报,2013,34(5):1122-1128. CHEN B Q, ZENG J J, WANG Y D, et al. Application of DFR method to optimal fatigue design of structures[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(5):1122-1128(in Chinese).
[8] 飞机设计手册总编委. 飞机设计手册/载荷、强度和刚度[M]. 北京:航空工业出版社,2001. Editorial Board of Aircraft Design Manual.Air craft design manual/load, strength and stiffness[M]. Beijing:Aviation Industry Press, 2001(in Chinese).
[9] 《民机结构耐久性与损伤容限设计手册》编委会. 民机结构耐久性与损伤容限设计手册(上册),疲劳设计与分析[M]. 北京:航空工业出版社,2003. Editorial Board of Durability and Damage Tolerance of the Civil Aircraft Design Manual. Durability and damage tolerance of the civil aircraft design manual, fatigue design and analysis[M]. Beijing:Aviation Industry Press, 2003(in Chinese).
[10] 刘文珽,等. 军用飞机结构疲劳设计细节疲劳额定值方法指南[M]. 北京:国防工业出版社,2012. LIU W T, et al. Military aircraft structural fatigue de sign detail fatigue rating methodological guide[M]. Beijing:Nationai Defence Industry Press, 2012(in Chinese).
CJA